From d4b278c02c1da92219ebeb34204b9768934aeca3 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 4 Oct 2006 20:46:15 +0000 Subject: AMD Rev F support git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/Iwill/DK8HTX/auto.c | 4 +- src/mainboard/Iwill/DK8S2/auto.c | 4 +- src/mainboard/Iwill/DK8X/auto.c | 4 +- src/mainboard/agami/aruma/Options.lb | 2 +- src/mainboard/amd/serenade/auto.c | 4 +- src/mainboard/amd/serengeti_cheetah/Config.lb | 406 +++++++++++++++++++++ src/mainboard/amd/serengeti_cheetah/Options.lb | 329 +++++++++++++++++ src/mainboard/amd/serengeti_cheetah/a | 25 ++ src/mainboard/amd/serengeti_cheetah/acpi_tables.c | 268 ++++++++++++++ src/mainboard/amd/serengeti_cheetah/apc_auto.c | 108 ++++++ src/mainboard/amd/serengeti_cheetah/c | 5 + .../amd/serengeti_cheetah/cache_as_ram_auto.c | 395 ++++++++++++++++++++ src/mainboard/amd/serengeti_cheetah/chip.h | 6 + src/mainboard/amd/serengeti_cheetah/cmos.layout | 98 +++++ src/mainboard/amd/serengeti_cheetah/dx/amd8111.asl | 172 +++++++++ .../amd/serengeti_cheetah/dx/amd8111_isa.asl | 176 +++++++++ .../amd/serengeti_cheetah/dx/amd8111_pic.asl | 360 ++++++++++++++++++ src/mainboard/amd/serengeti_cheetah/dx/amd8131.asl | 119 ++++++ src/mainboard/amd/serengeti_cheetah/dx/amd8151.asl | 29 ++ .../amd/serengeti_cheetah/dx/amdk8_util.asl | 315 ++++++++++++++++ src/mainboard/amd/serengeti_cheetah/dx/dsdt_lb.dsl | 212 +++++++++++ src/mainboard/amd/serengeti_cheetah/dx/pci0_hc.asl | 2 + src/mainboard/amd/serengeti_cheetah/dx/pci2.asl | 68 ++++ src/mainboard/amd/serengeti_cheetah/dx/pci2_hc.asl | 1 + src/mainboard/amd/serengeti_cheetah/dx/superio.asl | 1 + src/mainboard/amd/serengeti_cheetah/fadt.c | 149 ++++++++ src/mainboard/amd/serengeti_cheetah/get_bus_conf.c | 140 +++++++ src/mainboard/amd/serengeti_cheetah/irq_tables.c | 139 +++++++ src/mainboard/amd/serengeti_cheetah/mainboard.c | 12 + src/mainboard/amd/serengeti_cheetah/mb_sysconf.h | 23 ++ src/mainboard/amd/serengeti_cheetah/mptable.c | 145 ++++++++ .../amd/serengeti_cheetah/readme_acpi.txt | 30 ++ src/mainboard/amd/serengeti_cheetah/resourcemap.c | 265 ++++++++++++++ src/mainboard/amd/serengeti_leopard/Config.lb | 8 +- src/mainboard/amd/serengeti_leopard/Options.lb | 18 +- src/mainboard/arima/hdama/auto.c | 4 +- src/mainboard/broadcom/blast/Options.lb | 8 +- src/mainboard/ibm/e325/auto.c | 4 +- src/mainboard/ibm/e326/auto.c | 4 +- src/mainboard/newisys/khepri/auto.c | 4 +- src/mainboard/sunw/ultra40/Options.lb | 8 +- src/mainboard/tyan/s2850/Options.lb | 6 +- src/mainboard/tyan/s2875/Options.lb | 6 +- src/mainboard/tyan/s2880/Options.lb | 6 +- src/mainboard/tyan/s2881/Options.lb | 6 +- src/mainboard/tyan/s2882/Options.lb | 6 +- src/mainboard/tyan/s2885/Options.lb | 6 +- src/mainboard/tyan/s2891/Options.lb | 8 +- src/mainboard/tyan/s2892/Options.lb | 8 +- src/mainboard/tyan/s2895/Options.lb | 8 +- src/mainboard/tyan/s4880/Options.lb | 6 +- src/mainboard/tyan/s4882/Options.lb | 6 +- 52 files changed, 4072 insertions(+), 74 deletions(-) create mode 100644 src/mainboard/amd/serengeti_cheetah/Config.lb create mode 100644 src/mainboard/amd/serengeti_cheetah/Options.lb create mode 100644 src/mainboard/amd/serengeti_cheetah/a create mode 100644 src/mainboard/amd/serengeti_cheetah/acpi_tables.c create mode 100644 src/mainboard/amd/serengeti_cheetah/apc_auto.c create mode 100644 src/mainboard/amd/serengeti_cheetah/c create mode 100644 src/mainboard/amd/serengeti_cheetah/cache_as_ram_auto.c create mode 100644 src/mainboard/amd/serengeti_cheetah/chip.h create mode 100644 src/mainboard/amd/serengeti_cheetah/cmos.layout create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/amd8111.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/amd8111_isa.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/amd8111_pic.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/amd8131.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/amd8151.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/amdk8_util.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/dsdt_lb.dsl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/pci0_hc.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/pci2.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/pci2_hc.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/dx/superio.asl create mode 100644 src/mainboard/amd/serengeti_cheetah/fadt.c create mode 100644 src/mainboard/amd/serengeti_cheetah/get_bus_conf.c create mode 100644 src/mainboard/amd/serengeti_cheetah/irq_tables.c create mode 100644 src/mainboard/amd/serengeti_cheetah/mainboard.c create mode 100644 src/mainboard/amd/serengeti_cheetah/mb_sysconf.h create mode 100644 src/mainboard/amd/serengeti_cheetah/mptable.c create mode 100644 src/mainboard/amd/serengeti_cheetah/readme_acpi.txt create mode 100644 src/mainboard/amd/serengeti_cheetah/resourcemap.c (limited to 'src/mainboard') diff --git a/src/mainboard/Iwill/DK8HTX/auto.c b/src/mainboard/Iwill/DK8HTX/auto.c index e42b9ce7ff..f54c76a8ba 100644 --- a/src/mainboard/Iwill/DK8HTX/auto.c +++ b/src/mainboard/Iwill/DK8HTX/auto.c @@ -11,7 +11,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -23,7 +22,6 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -126,8 +124,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" #define FIRST_CPU 1 #define SECOND_CPU 1 diff --git a/src/mainboard/Iwill/DK8S2/auto.c b/src/mainboard/Iwill/DK8S2/auto.c index 9a301fb9d4..06b3e42cdf 100644 --- a/src/mainboard/Iwill/DK8S2/auto.c +++ b/src/mainboard/Iwill/DK8S2/auto.c @@ -11,7 +11,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -23,7 +22,6 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -126,8 +124,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "northbridge/amd/amdk8/resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" #define FIRST_CPU 1 #define SECOND_CPU 1 diff --git a/src/mainboard/Iwill/DK8X/auto.c b/src/mainboard/Iwill/DK8X/auto.c index 0883b26fc9..52dfb87074 100644 --- a/src/mainboard/Iwill/DK8X/auto.c +++ b/src/mainboard/Iwill/DK8X/auto.c @@ -11,7 +11,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -24,7 +23,6 @@ #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -128,8 +126,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "northbridge/amd/amdk8/resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" #define FIRST_CPU 1 #define SECOND_CPU 1 diff --git a/src/mainboard/agami/aruma/Options.lb b/src/mainboard/agami/aruma/Options.lb index 847bf82a48..575c76a581 100644 --- a/src/mainboard/agami/aruma/Options.lb +++ b/src/mainboard/agami/aruma/Options.lb @@ -138,7 +138,7 @@ default LIFT_BSP_APIC_ID=0 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcc000 default DCACHE_RAM_SIZE=0x4000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/amd/serenade/auto.c b/src/mainboard/amd/serenade/auto.c index b959328768..72b064878a 100644 --- a/src/mainboard/amd/serenade/auto.c +++ b/src/mainboard/amd/serenade/auto.c @@ -13,7 +13,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -25,7 +24,6 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -128,8 +126,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" #define FIRST_CPU 1 #define SECOND_CPU 1 diff --git a/src/mainboard/amd/serengeti_cheetah/Config.lb b/src/mainboard/amd/serengeti_cheetah/Config.lb new file mode 100644 index 0000000000..f395e4138d --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/Config.lb @@ -0,0 +1,406 @@ +## +## Compute the location and size of where this firmware image +## (linuxBIOS plus bootloader) will live in the boot rom chip. +## +if USE_FAILOVER_IMAGE + default ROM_SECTION_SIZE = FAILOVER_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE ) +else + if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) + else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) + default ROM_SECTION_OFFSET = 0 + end +end + +## +## Compute the start location and size size of +## The linuxBIOS bootloader. +## +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + +## +## Compute where this copy of linuxBIOS will start in the boot rom +## +default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up linuxBIOS, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +default XIP_ROM_SIZE=65536 + +if USE_FAILOVER_IMAGE + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) +else + if USE_FALLBACK_IMAGE + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) + else + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) + end +end + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o + +#dir /drivers/si/3114 + +#needed by irq_tables and mptable and acpi_tables +object get_bus_conf.o + +if HAVE_MP_TABLE + object mptable.o +end + +if HAVE_PIRQ_TABLE + object irq_tables.o +end + +#if HAVE_ACPI_TABLES +# object acpi_tables.o +# object fadt.o +# if SB_HT_CHAIN_ON_BUS0 +# object dsdt_bus0.o +# else +# object dsdt.o +# end +# object ssdt.o +# if ACPI_SSDTX_NUM +# if SB_HT_CHAIN_ON_BUS0 +# object ssdt2_bus0.o +# else +# object ssdt2.o +# end +# end +#end + +if HAVE_ACPI_TABLES + object acpi_tables.o + object fadt.o + makerule dsdt.c + depends "$(MAINBOARD)/dx/dsdt_lb.dsl" + action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl" + action "mv dsdt_lb.hex dsdt.c" + end + object ./dsdt.o + + #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb + + if ACPI_SSDTX_NUM + makerule ssdt2.c + depends "$(MAINBOARD)/dx/pci2.asl" + action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci2.asl" + action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex" + action "mv pci2.hex ssdt2.c" + end + object ./ssdt2.o + end +end + +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + # compile cache_as_ram.c to auto.o + makerule ./cache_as_ram_auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + + else + #compile cache_as_ram.c to auto.inc + makerule ./cache_as_ram_auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + + end +end + +if USE_FAILOVER_IMAGE +else + if CONFIG_AP_CODE_IN_CAR + makerule ./apc_auto.o + depends "$(MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + ldscript /arch/i386/init/ldscript_apc.lb + end +end + +## +## Build our 16 bit and 32 bit linuxBIOS entry code +## + +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +end + +mainboardinit cpu/x86/32bit/entry32.inc +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + +## +## Build our reset vector (This is where linuxBIOS is entered) +## +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +end + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + +### +### This is the early phase of linuxBIOS startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover_failover.lds + end + end +else + if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + end + end +end + +### +### O.k. We aren't just an intermediary anymore! +### + +## +## Setup RAM +## +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject cache_as_ram_auto.o + else + mainboardinit ./cache_as_ram_auto.inc + end + +end + +## +## Include the secondary Configuration files +## +if CONFIG_CHIP_NAME + config chip.h +end + +# sample config for amd/serengeti_cheetah +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/amd/amd8132 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on + chip drivers/i2c/i2cmux # pca9556 smbus mux + device i2c 18 on #0 pca9516 1 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end + device i2c 18 on #1 pca9516 2 + chip drivers/generic/generic #dimm 1-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-2-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-2-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-3-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-3-1 + device i2c 57 on end + end + end + end + end # acpi + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 + device pci 19.0 on # northbridge + chip southbridge/amd/amd8151 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 1.0 on end + end + end # device pci 19.0 + + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + + + end #pci_domain +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end + +end + + diff --git a/src/mainboard/amd/serengeti_cheetah/Options.lb b/src/mainboard/amd/serengeti_cheetah/Options.lb new file mode 100644 index 0000000000..91712ece99 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/Options.lb @@ -0,0 +1,329 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses HAVE_ACPI_TABLES +uses ACPI_SSDTX_NUM +uses USE_FALLBACK_IMAGE +uses USE_FAILOVER_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_FAILOVER_BOOT +uses HAVE_HARD_RESET +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses FAILOVER_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_STREAM +uses CONFIG_ROM_STREAM_START +uses CONFIG_COMPRESSED_ROM_STREAM +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses LINUXBIOS_EXTRA_VERSION +uses _RAMBASE +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZE_AUTO_INC +uses K8_HT_FREQ_1G_SUPPORT + +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_USE_INIT + +uses SERIAL_CPU_INIT + +uses ENABLE_APIC_EXT_ID +uses APIC_ID_OFFSET +uses LIFT_BSP_APIC_ID + +uses CONFIG_PCI_64BIT_PREF_MEM + +uses CONFIG_LB_MEM_TOPK + +uses CONFIG_AP_CODE_IN_CAR + +uses MEM_TRAIN_SEQ + +uses WAIT_BEFORE_CPUS_INIT + +### +### Build options +### + +## +## ROM_SIZE is the size of boot ROM that this board will use. +## +default ROM_SIZE=524288 + +## +## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## +#default FALLBACK_SIZE=131072 +#default FALLBACK_SIZE=0x40000 + +#FALLBACK: 256K-4K +default FALLBACK_SIZE=0x3f000 +#FAILOVER: 4K +default FAILOVER_SIZE=0x01000 + +#more 1M for pgtbl +default CONFIG_LB_MEM_TOPK=2048 + +## +## Build code for the fallback boot +## +default HAVE_FALLBACK_BOOT=1 +default HAVE_FAILOVER_BOOT=1 + +## +## Build code to reset the motherboard from linuxBIOS +## +default HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=11 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 + +## ACPI tables will be included +default HAVE_ACPI_TABLES=1 +## extra SSDT num +default ACPI_SSDTX_NUM=1 + +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=1 + +## +## Move the default LinuxBIOS cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=8 +default CONFIG_MAX_PHYSICAL_CPUS=4 +default CONFIG_LOGICAL_CPUS=1 + +default SERIAL_CPU_INIT=0 + +default ENABLE_APIC_EXT_ID=0 +default APIC_ID_OFFSET=0x8 +default LIFT_BSP_APIC_ID=1 + +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 + +#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. +#2G +#default HW_MEM_HOLE_SIZEK=0x200000 +#1G +default HW_MEM_HOLE_SIZEK=0x100000 +#512M +#default HW_MEM_HOLE_SIZEK=0x80000 + +#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy +#default HW_MEM_HOLE_SIZE_AUTO_INC=1 + +#Opteron K8 1G HT Support +default K8_HT_FREQ_1G_SUPPORT=1 + +#VGA Console +default CONFIG_CONSOLE_VGA=1 +default CONFIG_PCI_ROM_RUN=1 + +#HT Unit ID offset, default is 1, the typical one +default HT_CHAIN_UNITID_BASE=0xa + +#real SB Unit ID, default is 0x20, mean dont touch it at last +default HT_CHAIN_END_UNITID_BASE=0x6 + +#make the SB HT chain on bus 0, default is not (0) +default SB_HT_CHAIN_ON_BUS0=2 + +#only offset for SB chain?, default is yes(1) +#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 + +#allow capable device use that above 4G +#default CONFIG_PCI_64BIT_PREF_MEM=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xc8000 +default DCACHE_RAM_SIZE=0x08000 +default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 +default CONFIG_USE_INIT=0 + +default CONFIG_AP_CODE_IN_CAR=1 +default MEM_TRAIN_SEQ=1 + +default WAIT_BEFORE_CPUS_INIT=1 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default MAINBOARD_PART_NUMBER="serengeti_cheetah" +default MAINBOARD_VENDOR="AMD" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 + +### +### LinuxBIOS layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +default ROM_IMAGE_SIZE = 65536 + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 32K heap +## +default HEAP_SIZE=0x8000 + +## +## Only use the option table in a normal image +## +default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) + +## +## LinuxBIOS C code runs at this location in RAM +## +default _RAMBASE=0x00100000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_STREAM = 1 + +#default CONFIG_COMPRESSED_ROM_STREAM = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CROSS_COMPILE)gcc-3.4.5 -m32" +default HOSTCC="gcc-3.4.5" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +### End Options.lb +end diff --git a/src/mainboard/amd/serengeti_cheetah/a b/src/mainboard/amd/serengeti_cheetah/a new file mode 100644 index 0000000000..d6a8f398e0 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/a @@ -0,0 +1,25 @@ +echo "Creating for ACPI hex for bus 1 Conf" +cd dx +iasl -tc dsdt_lb.dsl +rm DSDT.aml +mv dsdt_lb.hex ../dsdt.c +iasl -tc pci2.asl +rm SSDT2.aml +perl -e 's/AmlCode/AmlCode_ssdt2/g' -pi pci2.hex +mv pci2.hex ../ssdt2.c +cd .. +echo "Creating for ACPI hex for bus 0 Conf" +cd dx_bus0 +iasl -tc dsdt_lb.dsl +rm DSDT.aml +mv dsdt_lb.hex ../dsdt_bus0.c +iasl -tc pci2.asl +rm SSDT2.aml +perl -e 's/AmlCode/AmlCode_ssdt2/g' -pi pci2.hex +mv pci2.hex ../ssdt2_bus0.c +cd .. +echo "Creating ssdt" +iasl -tc ssdt_lb_x.dsl +rm SSDT.aml +perl -e 's/AmlCode/AmlCode_ssdt/g' -pi ssdt_lb_x.hex +mv ssdt_lb_x.hex ssdt.c diff --git a/src/mainboard/amd/serengeti_cheetah/acpi_tables.c b/src/mainboard/amd/serengeti_cheetah/acpi_tables.c new file mode 100644 index 0000000000..e4cf72b268 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/acpi_tables.c @@ -0,0 +1,268 @@ +/* + * Island Aruma ACPI support + * written by Stefan Reinauer + * (C) 2005 Stefan Reinauer + * + * + * Copyright 2005 AMD + * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mb_sysconf.h" + +#define DUMP_ACPI_TABLES 0 + +#if DUMP_ACPI_TABLES == 1 +static void dump_mem(unsigned start, unsigned end) +{ + + unsigned i; + print_debug("dump_mem:"); + for(i=start;i= 1 +extern unsigned char AmlCode_ssdt2[]; +//extern unsigned char AmlCode_ssdt3[]; +//extern unsigned char AmlCode_ssdt4[]; +//extern unsigned char AmlCode_ssdt5[]; +//extern unsigned char AmlCode_ssdt6[]; +//extern unsigned char AmlCode_ssdt7[]; +//extern unsigned char AmlCode_ssdt8[]; +#endif + +#define IO_APIC_ADDR 0xfec00000UL + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base=0x18; + + struct mb_sysconf_t *m; + + m = sysconf.mb; + + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write 8111 IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111, + IO_APIC_ADDR, 0); + + /* Write all 8131 IOAPICs */ + { + device_t dev; + struct resource *res; + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_1, + res->base, gsi_base ); + gsi_base+=7; + + } + } + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_2, + res->base, gsi_base ); + gsi_base+=7; + } + } + } + + current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) + current, 0, 0, 2, 5 ); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edige-triggered, Active high*/ + + + /* create all subtables for processors */ + current = acpi_create_madt_lapic_nmis(current, 5, 1); + /* 1: LINT1 connect to NMI */ + + + return current; +} + +extern void get_bus_conf(void); + +extern void update_ssdt(void *ssdt); + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *ssdtx; + + unsigned char *AmlCode_ssdtx[HC_POSSIBLE_NUM]; + + int i; + + get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn + + /* Align ACPI tables to 16byte */ + start = ( start + 0x0f ) & -0x10; + current = start; + + printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + printk_debug("ACPI: * HPET\n"); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdt,hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + printk_debug("ACPI: * MADT\n"); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current+=madt->header.length; + acpi_add_table(rsdt,madt); + + + /* SRAT */ + printk_debug("ACPI: * SRAT\n"); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current+=srat->header.length; + acpi_add_table(rsdt,srat); + + /* SLIT */ + printk_debug("ACPI: * SLIT\n"); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current+=slit->header.length; + acpi_add_table(rsdt,slit); + + /* SSDT */ + printk_debug("ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + current += ((acpi_header_t *)AmlCode_ssdt)->length; + memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdt,ssdt); + +#if ACPI_SSDTX_NUM >= 1 + // we need to make ssdt2 match to PCI2 in pci2.asl,... pci1234[1] + AmlCode_ssdtx[1] = AmlCode_ssdt2; +// AmlCode_ssdtx[2] = AmlCode_ssdt3; +// AmlCode_ssdtx[3] = AmlCode_ssdt4; +// AmlCode_ssdtx[4] = AmlCode_ssdt5; +// AmlCode_ssdtx[5] = AmlCode_ssdt6; +// AmlCode_ssdtx[6] = AmlCode_ssdt7; +// AmlCode_ssdtx[7] = AmlCode_ssdt8; + + //same htio, but different possition? We may have to copy, change HCIN, and recalculate the checknum and add_table + + for(i=1;ilength; + memcpy((void *)ssdtx, (void *)AmlCode_ssdtx[i], ((acpi_header_t *)AmlCode_ssdtx[i])->length); + acpi_add_table(rsdt,ssdtx); + } +#endif + + + /* FACS */ + printk_debug("ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* DSDT */ + printk_debug("ACPI: * DSDT\n"); + dsdt = (acpi_header_t *)current; + current += ((acpi_header_t *)AmlCode)->length; + memcpy((void *)dsdt,(void *)AmlCode, \ + ((acpi_header_t *)AmlCode)->length); + printk_debug("ACPI: * DSDT @ %08x Length %x\n",dsdt,dsdt->length); + + /* FDAT */ + printk_debug("ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt,facs,dsdt); + acpi_add_table(rsdt,fadt); + +#if DUMP_ACPI_TABLES == 1 + printk_debug("rsdp\n"); + dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); + + printk_debug("rsdt\n"); + dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); + + printk_debug("madt\n"); + dump_mem(madt, ((void *)madt) + madt->header.length); + + printk_debug("srat\n"); + dump_mem(srat, ((void *)srat) + srat->header.length); + + printk_debug("slit\n"); + dump_mem(slit, ((void *)slit) + slit->header.length); + + printk_debug("ssdt\n"); + dump_mem(ssdt, ((void *)ssdt) + ssdt->length); + + printk_debug("fadt\n"); + dump_mem(fadt, ((void *)fadt) + fadt->header.length); +#endif + + printk_info("ACPI: done.\n"); + return current; +} + diff --git a/src/mainboard/amd/serengeti_cheetah/apc_auto.c b/src/mainboard/amd/serengeti_cheetah/apc_auto.c new file mode 100644 index 0000000000..d6a19e6e96 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/apc_auto.c @@ -0,0 +1,108 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#define SET_NB_CFG_54 1 + +//used by raminit +#define QRANK_DIMM_SUPPORT 1 + +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 + +#include +#include +#include +#include +#include +#include +#include +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + +#include +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" + +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 + #include "lib/memcpy.c" +#endif + + +//#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#include "northbridge/amd/amdk8/debug.c" + +#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" + +#include "northbridge/amd/amdk8/amdk8_f.h" + +#include "cpu/x86/mtrr.h" +#include "cpu/amd/mtrr.h" +#include "cpu/x86/tsc.h" + +#include "northbridge/amd/amdk8/amdk8_f_pci.c" +#include "northbridge/amd/amdk8/raminit_f_dqs.c" + +#include "cpu/amd/dualcore/dualcore.c" + +void hardwaremain(int ret_addr) +{ + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + + struct node_core_id id; + + id = get_node_core_id_x(); + + print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); + + train_ram(id.nodeid, sysinfo, sysinfox); + + /* + go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp + */ + + __asm__ volatile ( + "movl %0, %%edi\n\t" + "jmp *%%edi\n\t" + :: "a"(ret_addr) + ); + + + +} +struct eregs { + uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; + uint32_t vector; + uint32_t error_code; + uint32_t eip; + uint32_t cs; + uint32_t eflags; +}; + +void x86_exception(struct eregs *info) +{ + do { + hlt(); + } while(1); +} + + diff --git a/src/mainboard/amd/serengeti_cheetah/c b/src/mainboard/amd/serengeti_cheetah/c new file mode 100644 index 0000000000..0abeb0ea86 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/c @@ -0,0 +1,5 @@ +rm dsdt.c +rm ssdt2.c +rm dsdt_bus0.c +rm ssdt2_bus0.c +rm ssdt.c diff --git a/src/mainboard/amd/serengeti_cheetah/cache_as_ram_auto.c b/src/mainboard/amd/serengeti_cheetah/cache_as_ram_auto.c new file mode 100644 index 0000000000..c338704553 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/cache_as_ram_auto.c @@ -0,0 +1,395 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#define SET_NB_CFG_54 1 + +//used by raminit +#define QRANK_DIMM_SUPPORT 1 + +//used by incoherent_ht +//#define K8_SCAN_PCI_BUS 1 +//#define K8_ALLOCATE_IO_RANGE 1 + + +//used by init_cpus and fidvid +#define K8_SET_FIDVID 1 +//if we want to wait for core1 done before DQS training, set it to 0 +#define K8_SET_FIDVID_CORE0_ONLY 1 + +//0: three for in bsp, only this one support F0_F1 workaround +//1: on every core0 +//2: one for on bsp +//#define MEM_TRAIN_SEQ 1 + +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 + +#include +#include +#include +#include +#include +#include +#include +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif +#if USE_FAILOVER_IMAGE==0 +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#endif + + + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "cpu/x86/bist.h" + +#if USE_FAILOVER_IMAGE==0 + +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 + #include "lib/memcpy.c" +#endif +#include "northbridge/amd/amdk8/debug.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" + +static void memreset_setup(void) +{ + //GPIO on amd8111 to enable MEMRST ???? + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_HUB 0x18 + int ret,i; + unsigned device=(ctrl->channel0[0])>>8; + /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/ + i=2; + do { + ret = smbus_write_byte(SMBUS_HUB, 0x01, device); + } while ((ret!=0) && (i-->0)); + + smbus_write_byte(SMBUS_HUB, 0x03, 0); +} +#if 0 +static inline void change_i2c_mux(unsigned device) +{ +#define SMBUS_HUB 0x18 + int ret, i; + print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\r\n"); + i=2; + do { + ret = smbus_write_byte(SMBUS_HUB, 0x01, device); + print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\r\n"); + } while ((ret!=0) && (i-->0)); + ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); + print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\r\n"); +} +#endif + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8_f.h" +#include "northbridge/amd/amdk8/coherent_ht.c" + +#include "northbridge/amd/amdk8/incoherent_ht.c" + +#include "northbridge/amd/amdk8/raminit_f.c" + +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#define RC0 ((1<<0)<<8) +#define RC1 ((1<<1)<<8) +#define RC2 ((1<<2)<<8) +#define RC3 ((1<<3)<<8) + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 +#define DIMM4 0x54 +#define DIMM5 0x55 +#define DIMM6 0x56 +#define DIMM7 0x57 + + +#include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" + +#include "cpu/amd/model_fxx/fidvid.c" +#endif + +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: +#if HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif + ; +} +#endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if HAVE_FAILOVER_BOOT==1 + #if USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if USE_FAILOVER_IMAGE==0 + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + //first node + RC0|DIMM0, RC0|DIMM2, 0, 0, + RC0|DIMM1, RC0|DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, + RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, +#endif +#if CONFIG_MAX_PHYSICAL_CPUS > 2 + // third node + RC2|DIMM0, RC2|DIMM2, 0, 0, + RC2|DIMM1, RC2|DIMM3, 0, 0, + // four node + RC3|DIMM0, RC3|DIMM2, RC3|DIMM4, RC3|DIMM6, + RC3|DIMM1, RC3|DIMM3, RC3|DIMM5, RC3|DIMM7, +#endif + + }; + + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + + int needs_reset; int i; + unsigned bsp_apicid = 0; + + if (bist == 0) { + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(CONFIG_MAX_PHYSICAL_CPUS, sysinfo->ctrl, spd_addr); + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + +// post_code(0x32); + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + +// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); + + setup_serengeti_cheetah_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); + +#if MEM_TRAIN_SEQ == 1 + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram +#endif + setup_coherent_ht_domain(); // routing table and start other core0 + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + +#if 0 + //it your CPU min fid is 1G, you can change HT to 1G and FID to max one time. + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); +#endif + +#if K8_SET_FIDVID == 1 + + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } + + enable_fid_change(); + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + init_fidvid_bsp(bsp_apicid); + + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } +#endif + +#if 1 + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); + } +#endif + allow_all_aps_stop(bsp_apicid); + +#if 0 + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); +#endif + + enable_smbus(); + +#if 0 + for(i=0;i<4;i++) { + activate_spd_rom(&cpu[i]); + dump_smbus_registers(); + } +#endif + +#if 0 + for(i=1;i<256;i<<=1) { + change_i2c_mux(i); + dump_smbus_registers(); + } +#endif + + memreset_setup(); + + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ +// init_timer(); // Need to use TMICT to synconize FID/VID + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + +#if 0 + print_pci_devices(); +#endif + +#if 0 +// dump_pci_devices(); + dump_pci_device_index_wait(PCI_DEV(0, 0x18, 2), 0x98); + dump_pci_device_index_wait(PCI_DEV(0, 0x19, 2), 0x98); +#endif + + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now + +} +#endif diff --git a/src/mainboard/amd/serengeti_cheetah/chip.h b/src/mainboard/amd/serengeti_cheetah/chip.h new file mode 100644 index 0000000000..258d16de4e --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/chip.h @@ -0,0 +1,6 @@ +extern struct chip_operations mainboard_amd_serengeti_cheetah_ops; + +struct mainboard_amd_serengeti_cheetah_config { +// int fixup_scsi; +// int fixup_vga; +}; diff --git a/src/mainboard/amd/serengeti_cheetah/cmos.layout b/src/mainboard/amd/serengeti_cheetah/cmos.layout new file mode 100644 index 0000000000..0daae9221d --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/cmos.layout @@ -0,0 +1,98 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 dual_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/amd/serengeti_cheetah/dx/amd8111.asl b/src/mainboard/amd/serengeti_cheetah/dx/amd8111.asl new file mode 100644 index 0000000000..e64bc4a062 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/amd8111.asl @@ -0,0 +1,172 @@ +/* + * Copyright 2005 AMD + */ +//AMD8111 + Name (APIC, Package (0x04) + { + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present + Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11}, + Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12}, + Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13} + }) + + Name (PICM, Package (0x04) + { + Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00}, + Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00}, + Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00}, + Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00} + }) + + Name (DNCG, Ones) + + Method (_PRT, 0, NotSerialized) + { + If (LEqual (^DNCG, Ones)) { + Store (DADD(\_SB.PCI0.SBDN, 0x0001ffff), Local0) + // Update the Device Number according to SBDN + Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0)) + Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0)) + Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0)) + Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0)) + + Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0)) + Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0)) + Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0)) + Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0)) + + Store (0x00, ^DNCG) + + } + + If (LNot (PICF)) { + Return (PICM) + } + Else { + Return (APIC) + } + } + + Device (SBC3) + { + /* acpi smbus it should be 0x00040003 if 8131 present */ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(\_SB.PCI0.SBDN, 0x00010003)) + } + OperationRegion (PIRQ, PCI_Config, 0x56, 0x02) + Field (PIRQ, ByteAcc, Lock, Preserve) + { + PIBA, 8, + PIDC, 8 + } +/* + OperationRegion (TS3_, PCI_Config, 0xC4, 0x02) + Field (TS3_, DWordAcc, NoLock, Preserve) + { + PTS3, 16 + } +*/ + } + + Device (HPET) + { + Name (HPT, 0x00) + Name (_HID, EisaId ("PNP0103")) + Name (_UID, 0x00) + Method (_STA, 0, NotSerialized) + { + Return (0x0F) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400) + }) + Return (BUF0) + } + } + + Include ("amd8111_pic.asl") + + Include ("amd8111_isa.asl") + + Device (TP2P) + { + /* 8111 P2P and it should 0x00030000 when 8131 present*/ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(\_SB.PCI0.SBDN, 0x00000000)) + } + + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x08, 0x03 }) } + Else { Return (Package (0x02) { 0x08, 0x01 }) } + } + + Device (USB0) + { + Name (_ADR, 0x00000000) + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) } + Else { Return (Package (0x02) { 0x0F, 0x01 }) } + } + } + + Device (USB1) + { + Name (_ADR, 0x00000001) + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) } + Else { Return (Package (0x02) { 0x0F, 0x01 }) } + } + } + + Name (APIC, Package (0x0C) + { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, + + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 4 + Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 }, + + Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 3 + Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 } + }) + + Name (PICM, Package (0x0C) + { + Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //USB + Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, + + Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //Slot 4 + Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, + + Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, //Slot 3 + Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 } + }) + + Method (_PRT, 0, NotSerialized) + { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } + } + diff --git a/src/mainboard/amd/serengeti_cheetah/dx/amd8111_isa.asl b/src/mainboard/amd/serengeti_cheetah/dx/amd8111_isa.asl new file mode 100644 index 0000000000..b68230607e --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/amd8111_isa.asl @@ -0,0 +1,176 @@ +/* + * Copyright 2005 AMD + */ +//AMD8111 isa + + Device (ISA) + { + /* lpc 0x00040000 */ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(\_SB.PCI0.SBDN, 0x00010000)) + } + + OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers + Field (PIRY, ByteAcc, NoLock, Preserve) + { + Z000, 2, // Parallel Port Range + , 1, + ECP, 1, // ECP Enable + FDC1, 1, // Floppy Drive Controller 1 + FDC2, 1, // Floppy Drive Controller 2 + Offset (0x01), + Z001, 3, // Serial Port A Range + SAEN, 1, // Serial Post A Enabled + Z002, 3, // Serial Port B Range + SBEN, 1 // Serial Post B Enabled + } + + Device (PIC) + { + Name (_HID, EisaId ("PNP0000")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0020, 0x0020, 0x01, 0x02) + IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02) + IRQ (Edge, ActiveHigh, Exclusive) {2} + }) + } + + Device (DMA1) + { + Name (_HID, EisaId ("PNP0200")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0000, 0x0000, 0x01, 0x10) + IO (Decode16, 0x0080, 0x0080, 0x01, 0x10) + IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20) + DMA (Compatibility, NotBusMaster, Transfer16) {4} + }) + } + + Device (TMR) + { + Name (_HID, EisaId ("PNP0100")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0040, 0x0040, 0x01, 0x04) + IRQ (Edge, ActiveHigh, Exclusive) {0} + }) + } + + Device (RTC) + { + Name (_HID, EisaId ("PNP0B00")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0070, 0x0070, 0x01, 0x06) + IRQ (Edge, ActiveHigh, Exclusive) {8} + }) + } + + Device (SPKR) + { + Name (_HID, EisaId ("PNP0800")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0061, 0x0061, 0x01, 0x01) + }) + } + + Device (COPR) + { + Name (_HID, EisaId ("PNP0C04")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10) + IRQ (Edge, ActiveHigh, Exclusive) {13} + }) + } + + Device (SYSR) + { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x00) + Name (SYR1, ResourceTemplate () + { + IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) //wrh092302 - added to report Thor NVRAM + IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM + IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80) + IO (Decode16, 0x0010, 0x0010, 0x01, 0x10) + IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E) + IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C) + IO (Decode16, 0x0062, 0x0062, 0x01, 0x02) + IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B) + IO (Decode16, 0x0076, 0x0076, 0x01, 0x0A) + IO (Decode16, 0x0090, 0x0090, 0x01, 0x10) + IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E) + IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10) + IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error + IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error + }) + Method (_CRS, 0, NotSerialized) + { + Return (SYR1) + } + } + + Device (MEM) + { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF + Memory32Fixed (ReadWrite, 0x000C0000, 0x00000000) // video BIOS c0000-c8404 + Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC + Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM + Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC + Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS + }) + // Read the Video Memory length + CreateDWordField (BUF0, 0x14, CLEN) + CreateDWordField (BUF0, 0x10, CBAS) + + ShiftLeft (VGA1, 0x09, Local0) + Store (Local0, CLEN) + + Return (BUF0) + } + } + + Device (PS2M) + { + Name (_HID, EisaId ("PNP0F13")) + Name (_CRS, ResourceTemplate () + { + IRQNoFlags () {12} + }) + Method (_STA, 0, NotSerialized) + { + And (FLG0, 0x04, Local0) + If (LEqual (Local0, 0x04)) { Return (0x0F) } + Else { Return (0x00) } + } + } + + Device (PS2K) + { + Name (_HID, EisaId ("PNP0303")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + } + Include ("superio.asl") + + } + diff --git a/src/mainboard/amd/serengeti_cheetah/dx/amd8111_pic.asl b/src/mainboard/amd/serengeti_cheetah/dx/amd8111_pic.asl new file mode 100644 index 0000000000..228f3f84f1 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/amd8111_pic.asl @@ -0,0 +1,360 @@ +/* + * Copyright 2005 AMD + */ +//AMD8111 pic LNKA B C D + + Device (LNKA) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x01) + Method (_STA, 0, NotSerialized) + { + And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local0) + If (LEqual (Local0, 0x00)) { Return (0x09) } //Disabled + Else { Return (0x0B) } //Enabled + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFA) + } + + Method (_DIS, 0, NotSerialized) + { + Store (0x01, Local3) + And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1) + Store (Local1, Local2) + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local1) + } + + ShiftLeft (Local3, Local1, Local3) + Not (Local3, Local3) + And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFA, 0x01, IRA1) + CreateByteField (BUFA, 0x02, IRA2) + Store (0x00, Local3) + Store (0x00, Local4) + And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1) + If (LNot (LEqual (Local1, 0x00))) + { // Routing enable + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRA1) + Store (Local4, IRA2) + } + + Return (BUFA) + } + + Method (_SRS, 1, NotSerialized) + { + CreateByteField (Arg0, 0x01, IRA1) + CreateByteField (Arg0, 0x02, IRA2) + ShiftLeft (IRA2, 0x08, Local0) + Or (Local0, IRA1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) + { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + + And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA) + Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA) + } + } + + Device (LNKB) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x02) + Method (_STA, 0, NotSerialized) + { + And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local0) + If (LEqual (Local0, 0x00)) { Return (0x09) } + Else { Return (0x0B) } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFB) + } + + Method (_DIS, 0, NotSerialized) + { + Store (0x01, Local3) + And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + Store (Local1, Local2) + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local1) + } + + ShiftLeft (Local3, Local1, Local3) + Not (Local3, Local3) + And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFB, 0x01, IRB1) + CreateByteField (BUFB, 0x02, IRB2) + Store (0x00, Local3) + Store (0x00, Local4) + And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + If (LNot (LEqual (Local1, 0x00))) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRB1) + Store (Local4, IRB2) + } + + Return (BUFB) + } + + Method (_SRS, 1, NotSerialized) + { + CreateByteField (Arg0, 0x01, IRB1) + CreateByteField (Arg0, 0x02, IRB2) + ShiftLeft (IRB2, 0x08, Local0) + Or (Local0, IRB1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) + { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + + And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA) + ShiftLeft (Local1, 0x04, Local1) + Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA) + } + } + + Device (LNKC) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x03) + Method (_STA, 0, NotSerialized) + { + And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local0) + If (LEqual (Local0, 0x00)) { Return (0x09) } + Else { Return (0x0B) } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFA) + } + + Method (_DIS, 0, NotSerialized) + { + Store (0x01, Local3) + And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1) + Store (Local1, Local2) + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local1) + } + + ShiftLeft (Local3, Local1, Local3) + Not (Local3, Local3) + And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFA, 0x01, IRA1) + CreateByteField (BUFA, 0x02, IRA2) + Store (0x00, Local3) + Store (0x00, Local4) + And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1) + If (LNot (LEqual (Local1, 0x00))) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRA1) + Store (Local4, IRA2) + } + + Return (BUFA) + } + + Method (_SRS, 1, NotSerialized) + { + CreateByteField (Arg0, 0x01, IRA1) + CreateByteField (Arg0, 0x02, IRA2) + ShiftLeft (IRA2, 0x08, Local0) + Or (Local0, IRA1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) + { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + + And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC) + Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC) + } + } + + Device (LNKD) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x04) + Method (_STA, 0, NotSerialized) + { + And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local0) + If (LEqual (Local0, 0x00)) { Return (0x09) } + Else { Return (0x0B) } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFB) + } + + Method (_DIS, 0, NotSerialized) + { + Store (0x01, Local3) + And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + Store (Local1, Local2) + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local1) + } + + ShiftLeft (Local3, Local1, Local3) + Not (Local3, Local3) + And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFB, 0x01, IRB1) + CreateByteField (BUFB, 0x02, IRB2) + Store (0x00, Local3) + Store (0x00, Local4) + And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + If (LNot (LEqual (Local1, 0x00))) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRB1) + Store (Local4, IRB2) + } + + Return (BUFB) + } + + Method (_SRS, 1, NotSerialized) + { + CreateByteField (Arg0, 0x01, IRB1) + CreateByteField (Arg0, 0x02, IRB2) + ShiftLeft (IRB2, 0x08, Local0) + Or (Local0, IRB1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) + { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + + And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC) + ShiftLeft (Local1, 0x04, Local1) + Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC) + } + } + + diff --git a/src/mainboard/amd/serengeti_cheetah/dx/amd8131.asl b/src/mainboard/amd/serengeti_cheetah/dx/amd8131.asl new file mode 100644 index 0000000000..e209665e48 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/amd8131.asl @@ -0,0 +1,119 @@ +/* + * Copyright 2005 AMD + */ + + Device (PG0A) + { + /* 8132 pcix bridge*/ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(GHCD(HCIN, 0), 0x00000000)) + } + + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) } + Else { Return (Package (0x02) { 0x29, 0x01 }) } + } + + Name (APIC, Package (0x14) + { + // Slot A - PIRQ BCDA + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 2 + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A }, + Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 }, + + //Cypress Slot A - PIRQ BCDA + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x19 }, //? + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1A }, + Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x18 }, + + //Cypress Slot B - PIRQ CDAB + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1A }, //? + Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1B }, + Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x18 }, + Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x19 }, + + //Cypress Slot C - PIRQ DABC + Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x1B }, //? + Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x18 }, + Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x19 }, + Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x1A }, + + //Cypress Slot D - PIRQ ABCD + Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x18 }, //? + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x19 }, + Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1A }, + Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1B } + }) + Name (PICM, Package (0x14) + { + Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//Slot 2 + Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, + + Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, + + Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, + + Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, + + Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0006FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0006FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0006FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } + }) + Method (_PRT, 0, NotSerialized) + { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } + } + + Device (PG0B) + { + /* 8132 pcix bridge 2 */ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(GHCD(HCIN, 0), 0x00010000)) + } + + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) } + Else { Return (Package (0x02) { 0x22, 0x01 }) } + } + + Name (APIC, Package (0x04) + { + // Slot A - PIRQ ABCD + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1F },// Slot 1 + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x20 }, + Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x21 }, + Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x22 } + }) + Name (PICM, Package (0x04) + { + Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1 + Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } + }) + Method (_PRT, 0, NotSerialized) + { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } + } diff --git a/src/mainboard/amd/serengeti_cheetah/dx/amd8151.asl b/src/mainboard/amd/serengeti_cheetah/dx/amd8151.asl new file mode 100644 index 0000000000..001d45b0fe --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/amd8151.asl @@ -0,0 +1,29 @@ +// AMD8151 + Device (AGPB) + { + Method (_ADR, 0, NotSerialized) + { + Return (DADD(GHCD(HCIN, 0), 0x00010000)) + } + + Name (APIC, Package (0x04) + { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 } + }) + Name (PICM, Package (0x04) + { + Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } + }) + Method (_PRT, 0, NotSerialized) + { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } + } + diff --git a/src/mainboard/amd/serengeti_cheetah/dx/amdk8_util.asl b/src/mainboard/amd/serengeti_cheetah/dx/amdk8_util.asl new file mode 100644 index 0000000000..e9155476c5 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/amdk8_util.asl @@ -0,0 +1,315 @@ +/* + * Copyright 2005 AMD + */ + +//AMD k8 util for BUSB and res range + + Scope (\_SB) + { + + Name (OSTB, Ones) + Method (OSTP, 0, NotSerialized) + { + If (LEqual (^OSTB, Ones)) + { + Store (0x00, ^OSTB) + } + + Return (^OSTB) + } + + Method (SEQL, 2, Serialized) + { + Store (SizeOf (Arg0), Local0) + Store (SizeOf (Arg1), Local1) + If (LNot (LEqual (Local0, Local1))) { Return (Zero) } + + Name (BUF0, Buffer (Local0) {}) + Store (Arg0, BUF0) + Name (BUF1, Buffer (Local0) {}) + Store (Arg1, BUF1) + Store (Zero, Local2) + While (LLess (Local2, Local0)) + { + Store (DerefOf (Index (BUF0, Local2)), Local3) + Store (DerefOf (Index (BUF1, Local2)), Local4) + If (LNot (LEqual (Local3, Local4))) { Return (Zero) } + + Increment (Local2) + } + + Return (One) + } + + + Method (DADD, 2, NotSerialized) + { + Store( Arg1, Local0) + Store( Arg0, Local1) + Add( ShiftLeft(Local1,16), Local0, Local0) + Return (Local0) + } + + + Method (GHCE, 1, NotSerialized) // check if the HC enabled + { + Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1) + if(LEqual ( And(Local1, 0x01), 0x01)) { Return (0x0F) } + Else { Return (0x00) } + } + + Method (GHCN, 1, NotSerialized) // get the node num for the HC + { + Store (0x00, Local0) + Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1) + Store (ShiftRight( And (Local1, 0xf0), 0x04), Local0) + Return (Local0) + } + + Method (GHCL, 1, NotSerialized) // get the link num on node for the HC + { + Store (0x00, Local0) + Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1) + Store (ShiftRight( And (Local1, 0xf00), 0x08), Local0) + Return (Local0) + } + + Method (GHCD, 2, NotSerialized) // get the unit id base for the HT device in HC + { + Store (0x00, Local0) + Store (DerefOf (Index (\_SB.PCI0.HCDN, Arg0)), Local1) + Store (Arg1, Local2) // Arg1 could be 3, 2, 1, 0 + Multiply (Local2, 0x08, Local2) // change to 24, 16, 8, 0 + Store (And (ShiftRight( Local1, Local2), 0xff), Local0) + Return (Local0) + } + + Method (GBUS, 2, NotSerialized) + { + Store (0x00, Local0) + While (LLess (Local0, 0x04)) + { + Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1) + If (LEqual (And (Local1, 0x03), 0x03)) + { + If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04))) + { + If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08)))) + { + Return (ShiftRight (And (Local1, 0x00FF0000), 0x10)) + } + } + } + + Increment (Local0) + } + + Return (0x00) + } + + Method (GWBN, 2, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0000, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0000,,,) + }) + CreateWordField (BUF0, 0x08, BMIN) + CreateWordField (BUF0, 0x0A, BMAX) + CreateWordField (BUF0, 0x0E, BLEN) + Store (0x00, Local0) + While (LLess (Local0, 0x04)) + { + Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1) + If (LEqual (And (Local1, 0x03), 0x03)) + { + If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04))) + { + If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08)))) + { + Store (ShiftRight (And (Local1, 0x00FF0000), 0x10), BMIN) + Store (ShiftRight (Local1, 0x18), BMAX) + Subtract (BMAX, BMIN, BLEN) + Increment (BLEN) + Return (RTAG (BUF0)) + } + } + } + + Increment (Local0) + } + + Return (RTAG (BUF0)) + } + + Method (GMEM, 2, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, + 0x00000000, // Address Space Granularity + 0x00000000, // Address Range Minimum + 0x00000000, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x00000000,,, + , AddressRangeMemory, TypeStatic) + }) + CreateDWordField (BUF0, 0x0A, MMIN) + CreateDWordField (BUF0, 0x0E, MMAX) + CreateDWordField (BUF0, 0x16, MLEN) + Store (0x00, Local0) + Store (0x00, Local4) + Store (0x00, Local3) + While (LLess (Local0, 0x10)) + { + Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local1) + Increment (Local0) + Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local2) + If (LEqual (And (Local1, 0x03), 0x03)) + { + If (LEqual (Arg0, And (Local2, 0x07))) + { + If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) + { + Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN) + Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX) + Or (MMAX, 0xFFFF, MMAX) + Subtract (MMAX, MMIN, MLEN) + + If (Local4) + { + Concatenate (RTAG (BUF0), Local3, Local5) + Store (Local5, Local3) + } + Else + { + If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK))) + { + Store (\_SB.PCI0.TOM1, MMIN) + Subtract (MMAX, MMIN, MLEN) + Increment (MLEN) + } + + Store (RTAG (BUF0), Local3) + } + + Increment (Local4) + } + } + } + + Increment (Local0) + } + + If (LNot (Local4)) + { + Store (BUF0, Local3) + } + + Return (Local3) + } + + Method (GIOR, 2, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x00000000, // Address Space Granularity + 0x00000000, // Address Range Minimum + 0x00000000, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x00000000,,, + , TypeStatic) + }) + CreateDWordField (BUF0, 0x0A, PMIN) + CreateDWordField (BUF0, 0x0E, PMAX) + CreateDWordField (BUF0, 0x16, PLEN) + Store (0x00, Local0) + Store (0x00, Local4) + Store (0x00, Local3) + While (LLess (Local0, 0x08)) + { + Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local1) + Increment (Local0) + Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local2) + If (LEqual (And (Local1, 0x03), 0x03)) + { + If (LEqual (Arg0, And (Local2, 0x07))) + { + If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) + { + Store (And (Local1, 0x01FFF000), PMIN) + Store (And (Local2, 0x01FFF000), PMAX) + Or (PMAX, 0x0FFF, PMAX) + Subtract (PMAX, PMIN, PLEN) + Increment (PLEN) + + If (Local4) + { + Concatenate (RTAG (BUF0), Local3, Local5) + Store (Local5, Local3) + } + Else + { + If (LGreater (PMAX, PMIN)) + { + If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK))) + { + Store (0x0D00, PMIN) + Subtract (PMAX, PMIN, PLEN) + Increment (PLEN) + } + + Store (RTAG (BUF0), Local3) + Increment (Local4) + } + + If (And (Local1, 0x10)) + { + Store (0x03B0, PMIN) + Store (0x03DF, PMAX) + Store (0x30, PLEN) + If (Local4) + { + Concatenate (RTAG (BUF0), Local3, Local5) + Store (Local5, Local3) + } + Else + { + Store (RTAG (BUF0), Local3) + } + } + } + + Increment (Local4) + } + } + } + + Increment (Local0) + } + + If (LNot (Local4)) + { + Store (RTAG (BUF0), Local3) + } + + Return (Local3) + } + + Method (RTAG, 1, NotSerialized) + { + Store (Arg0, Local0) + Store (SizeOf (Local0), Local1) + Subtract (Local1, 0x02, Local1) + Multiply (Local1, 0x08, Local1) + CreateField (Local0, 0x00, Local1, RETB) + Store (RETB, Local2) + Return (Local2) + } + } + diff --git a/src/mainboard/amd/serengeti_cheetah/dx/dsdt_lb.dsl b/src/mainboard/amd/serengeti_cheetah/dx/dsdt_lb.dsl new file mode 100644 index 0000000000..04ec830f08 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/dsdt_lb.dsl @@ -0,0 +1,212 @@ +/* + * Copyright 2005 AMD + */ +DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-K8", "AMDACPI", 100925440) +{ + Scope (_PR) + { + Processor (CPU0, 0x00, 0x0000C010, 0x06) {} + Processor (CPU1, 0x01, 0x00000000, 0x00) {} + Processor (CPU2, 0x02, 0x00000000, 0x00) {} + Processor (CPU3, 0x03, 0x00000000, 0x00) {} + + } + + Method (FWSO, 0, NotSerialized) { } + + Name (_S0, Package (0x04) { 0x00, 0x00, 0x00, 0x00 }) + Name (_S1, Package (0x04) { 0x01, 0x01, 0x01, 0x01 }) + Name (_S3, Package (0x04) { 0x05, 0x05, 0x05, 0x05 }) + Name (_S5, Package (0x04) { 0x07, 0x07, 0x07, 0x07 }) + + Scope (_SB) + { + Device (PCI0) + { + /* BUS0 root bus */ + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + External (CBST) + + + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00180000) + Name (_UID, 0x01) + + Name (HCIN, 0x00) // HC1 + + Method (_BBN, 0, NotSerialized) + { + Return (GBUS (GHCN(HCIN), GHCL(HCIN))) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) //CF8-CFFh + IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h + IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h + + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x8100, // Address Range Minimum + 0xFFFF, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x7F00,,, + , TypeStatic) //8100h-FFFFh + + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, // Address Space Granularity + 0x000C0000, // Address Range Minimum + 0x00000000, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x00000000,,, + , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh + + Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF + + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x03AF, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x03B0,,, + , TypeStatic) //0-CF7h + + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x03E0, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0918,,, + , TypeStatic) //0-CF7h + }) + \_SB.OSTP () + CreateDWordField (BUF0, 0x3E, VLEN) + CreateDWordField (BUF0, 0x36, VMAX) + CreateDWordField (BUF0, 0x32, VMIN) + ShiftLeft (VGA1, 0x09, Local0) + Add (VMIN, Local0, VMAX) + Decrement (VMAX) + Store (Local0, VLEN) + Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) + Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) + Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + + Include ("pci0_hc.asl") + + } + Device (PCI1) + { + Name (_HID, "PNP0A03") + Name (_ADR, 0x00000000) + Name (_UID, 0x02) + Method (_STA, 0, NotSerialized) + { + Return (\_SB.PCI0.CBST) + } + Name (_BBN, 0x00) + } + + + } + + Scope (_GPE) + { + Method (_L08, 0, NotSerialized) + { + Notify (\_SB.PCI0, 0x02) //PME# Wakeup + } + + Method (_L0F, 0, NotSerialized) + { + Notify (\_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup + } + + Method (_L22, 0, NotSerialized) // GPIO18 (LID) - Pogo 0 Bridge B + { + Notify (\_SB.PCI0.PG0B, 0x02) + } + + Method (_L29, 0, NotSerialized) // GPIO25 (Suspend) - Pogo 0 Bridge A + { + Notify (\_SB.PCI0.PG0A, 0x02) + } + } + + Method (_PTS, 1, NotSerialized) + { + Or (Arg0, 0xF0, Local0) + Store (Local0, DBG1) + } +/* + Method (_WAK, 1, NotSerialized) + { + Or (Arg0, 0xE0, Local0) + Store (Local0, DBG1) + } +*/ + Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode + Method (_PIC, 1, NotSerialized) //PIC Flag and Interface Method + { + Store (Arg0, PICF) + } + + OperationRegion (DEBG, SystemIO, 0x80, 0x01) + Field (DEBG, ByteAcc, Lock, Preserve) + { + DBG1, 8 + } + + OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04) + Field (EXTM, WordAcc, Lock, Preserve) + { + AMEM, 32 + } + + OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01) + Field (VGAM, ByteAcc, Lock, Preserve) + { + VGA1, 8 + } + + OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) + Field (GRAM, ByteAcc, Lock, Preserve) + { + Offset (0x10), + FLG0, 8 + } + + OperationRegion (GSTS, SystemIO, 0xC028, 0x02) + Field (GSTS, ByteAcc, NoLock, Preserve) + { + , 4, + IRQR, 1 + } + + OperationRegion (Z007, SystemIO, 0x21, 0x01) + Field (Z007, ByteAcc, NoLock, Preserve) + { + Z008, 8 + } + + OperationRegion (Z009, SystemIO, 0xA1, 0x01) + Field (Z009, ByteAcc, NoLock, Preserve) + { + Z00A, 8 + } + + Include ("amdk8_util.asl") + +} + diff --git a/src/mainboard/amd/serengeti_cheetah/dx/pci0_hc.asl b/src/mainboard/amd/serengeti_cheetah/dx/pci0_hc.asl new file mode 100644 index 0000000000..b1e9562f6b --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/pci0_hc.asl @@ -0,0 +1,2 @@ + Include ("amd8111.asl") //real SB at first + Include ("amd8131.asl") diff --git a/src/mainboard/amd/serengeti_cheetah/dx/pci2.asl b/src/mainboard/amd/serengeti_cheetah/dx/pci2.asl new file mode 100644 index 0000000000..a62ba98333 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/pci2.asl @@ -0,0 +1,68 @@ +/* + * Copyright 2005 AMD + */ +DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) +{ + Scope (_SB) + { + External (DADD, MethodObj) + External (GHCE, MethodObj) + External (GHCN, MethodObj) + External (GHCL, MethodObj) + External (GHCD, MethodObj) + External (GNUS, MethodObj) + External (GIOR, MethodObj) + External (GMEM, MethodObj) + External (GWBN, MethodObj) + External (GBUS, MethodObj) + + External (PICF) + + External (\_SB.PCI0.LNKA, DeviceObj) + External (\_SB.PCI0.LNKB, DeviceObj) + External (\_SB.PCI0.LNKC, DeviceObj) + External (\_SB.PCI0.LNKD, DeviceObj) + + Device (PCI2) + { + + // BUS ? Second HT Chain + Name (HCIN, 0x01) // HC2 + + Name (_HID, "PNP0A03") + + Method (_ADR, 0, NotSerialized) //Fake bus should be 0 + { + Return (DADD(GHCN(HCIN), 0x00180000)) + } + + Name (_UID, 0x03) + + Method (_BBN, 0, NotSerialized) + { + Return (GBUS (GHCN(HCIN), GHCL(HCIN))) + } + + Method (_STA, 0, NotSerialized) + { + Return (\_SB.GHCE(HCIN)) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { }) + Store( GHCN(HCIN), Local4) + Store( GHCL(HCIN), Local5) + + Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1) + Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2) + Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3) + Return (Local3) + } + + Include ("pci2_hc.asl") + } + } + +} + diff --git a/src/mainboard/amd/serengeti_cheetah/dx/pci2_hc.asl b/src/mainboard/amd/serengeti_cheetah/dx/pci2_hc.asl new file mode 100644 index 0000000000..045d090392 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/pci2_hc.asl @@ -0,0 +1 @@ + Include ("amd8151.asl") diff --git a/src/mainboard/amd/serengeti_cheetah/dx/superio.asl b/src/mainboard/amd/serengeti_cheetah/dx/superio.asl new file mode 100644 index 0000000000..86a10a94ae --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/dx/superio.asl @@ -0,0 +1 @@ +// Include ("w83627hf.asl") diff --git a/src/mainboard/amd/serengeti_cheetah/fadt.c b/src/mainboard/amd/serengeti_cheetah/fadt.c new file mode 100644 index 0000000000..3442082467 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/fadt.c @@ -0,0 +1,149 @@ +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + * (C) Copyright 2005 Stefan Reinauer + */ + +#include +#include +#include + +extern unsigned pm_base; /* pm_base should be set in sb acpi */ + +void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ + + acpi_header_t *header=&(fadt->header); + + printk_debug("pm_base: 0x%04x\n", pm_base); + + /* Prepare the header */ + memset((void *)fadt,0,sizeof(acpi_fadt_t)); + memcpy(header->signature,"FACP",4); + header->length = 244; + header->revision = 1; + memcpy(header->oem_id,OEM_ID,6); + memcpy(header->oem_table_id,"LXBACPI ",8); + memcpy(header->asl_compiler_id,ASLC,4); + header->asl_compiler_revision=0; + + fadt->firmware_ctrl=(u32)facs; + fadt->dsdt= (u32)dsdt; + fadt->res1=0x0; + // 3=Workstation,4=Enterprise Server, 7=Performance Server + fadt->preferred_pm_profile=0x03; + fadt->sci_int=9; + // disable system management mode by setting to 0: + fadt->smi_cmd = 0;//pm_base+0x2f; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + + fadt->pm1a_evt_blk = pm_base; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = pm_base+0x04; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = 0x0000; + fadt->pm_tmr_blk = pm_base+0x08; + fadt->gpe0_blk = pm_base+0x20; + fadt->gpe1_blk = pm_base+0xb0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 0; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 4; + fadt->gpe1_blk_len = 8; + fadt->gpe1_base = 16; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; + fadt->p_lvl3_lat = 1001; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0; // 0x7d these have to be + fadt->mon_alrm = 0; // 0x7e added to cmos.layout + fadt->century = 0; // 0x7f to make rtc alrm work + fadt->iapc_boot_arch = 0x3; // See table 5-11 + fadt->flags = 0x25; + + fadt->res2 = 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (u32)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pm_base; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pm_base+4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = 0x0; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pm_base+0x08; + fadt->x_pm_tmr_blk.addrh = 0x0; + + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pm_base+0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 64; + fadt->x_gpe1_blk.bit_offset = 16; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = pm_base+0xb0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); + +} diff --git a/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c b/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c new file mode 100644 index 0000000000..cc4c0e4219 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c @@ -0,0 +1,140 @@ +#include +#include +#include +#include +#include +#if CONFIG_LOGICAL_CPUS==1 +#include +#endif + +#include + +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +static unsigned pci1234x[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +static unsigned hcdnx[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + int i; + struct mb_sysconf_t *m; + + if(get_bus_conf_done == 1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + + sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); + for(i=0;i> 8) & 0xff; + m->sbdn3 = sysconf.hcdn[0] & 0xff; + m->sbdn5 = sysconf.hcdn[1] & 0xff; + + m->bus_8132_0 = (sysconf.pci1234[0] >> 16) & 0xff; + m->bus_8111_0 = m->bus_8132_0; + + /* 8111 */ + dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); + if (dev) { + m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); + } + + /* 8132-1 */ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3,0)); + if (dev) { + m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); + } + + /* 8132-2 */ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1,0)); + if (dev) { + m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); + } + + /* HT chain 1 */ + if((sysconf.pci1234[1] & 0x1) == 1) { + m->bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff; + /* 8151 */ + dev = dev_find_slot(m->bus_8151_0, PCI_DEVFN(m->sbdn5+1, 0)); + + if (dev) { + m->bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +// printk_debug("bus_8151_1=%d\n",bus_8151_1); + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151_0, m->sbdn5+1); + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + m->apicid_8111 = apicid_base+0; + m->apicid_8132_1 = apicid_base+1; + m->apicid_8132_2 = apicid_base+2; +} diff --git a/src/mainboard/amd/serengeti_cheetah/irq_tables.c b/src/mainboard/amd/serengeti_cheetah/irq_tables.c new file mode 100644 index 0000000000..fb793078df --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/irq_tables.c @@ -0,0 +1,139 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include +#include +#include +#include +#include +#include + +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + +extern void get_bus_conf(void); + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + struct mb_sysconf_t *m; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_8111_0; + pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1022; + pirq->rtr_device = 0x746b; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; + + { + device_t dev; + dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn+1,3)); + if (dev) { + /* initialize PCI interupts - these assignments depend + on the PCB routing of PINTA-D + + PINTA = IRQ3 + PINTB = IRQ5 + PINTC = IRQ10 + PINTD = IRQ11 + */ + pci_write_config16(dev, 0x56, 0xba53); + } + } + +//pci bridge + printk_debug("setting Onboard AMD Southbridge \n"); + static const unsigned char slotIrqs_1_4[4] = { 3, 5, 10, 11 }; + pci_assign_irqs(m->bus_8111_0, sysconf.sbdn+1, slotIrqs_1_4); + write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard AMD USB \n"); + static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 11}; + pci_assign_irqs(m->bus_8111_1, 0, slotIrqs_8111_1_0); + write_pirq_info(pirq_info, m->bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + +//pcix bridge +// write_pirq_info(pirq_info, m->bus_8132_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +// pirq_info++; slot_num++; + + if(sysconf.pci1234[1] & 0xf) { + //agp bridge + write_pirq_info(pirq_info, m->bus_8151_0, (m->sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + } + + pirq_info++; slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/amd/serengeti_cheetah/mainboard.c b/src/mainboard/amd/serengeti_cheetah/mainboard.c new file mode 100644 index 0000000000..7f5929693a --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/mainboard.c @@ -0,0 +1,12 @@ +#include +#include +#include +#include +#include +#include "chip.h" + +#if CONFIG_CHIP_NAME == 1 +struct chip_operations mainboard_amd_serengeti_cheetah_ops = { + CHIP_NAME("AMD serengeti_cheetah mainboard") +}; +#endif diff --git a/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h b/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h new file mode 100644 index 0000000000..7368f05b4e --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h @@ -0,0 +1,23 @@ +#ifndef MB_SYSCONF_H + +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_isa; + unsigned char bus_8132_0; + unsigned char bus_8132_1; + unsigned char bus_8132_2; + unsigned char bus_8111_0; + unsigned char bus_8111_1; + unsigned char bus_8151_0; + unsigned char bus_8151_1; + unsigned apicid_8111; + unsigned apicid_8132_1; + unsigned apicid_8132_2; + + unsigned sbdn3; + unsigned sbdn5; +}; + +#endif + diff --git a/src/mainboard/amd/serengeti_cheetah/mptable.c b/src/mainboard/amd/serengeti_cheetah/mptable.c new file mode 100644 index 0000000000..d27c786631 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/mptable.c @@ -0,0 +1,145 @@ +#include +#include +#include +#include +#include +#if CONFIG_LOGICAL_CPUS==1 +#include +#endif + +#include +#include "mb_sysconf.h" + +extern void get_bus_conf(void); + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "AMD "; + static const char productid[12] = "SERENGETI "; + struct mp_config_table *mc; + + unsigned char bus_num; + int i; + struct mb_sysconf_t *m; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + + m = sysconf.mb; + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(bus_num = 0; bus_num < m->bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, m->bus_isa, "ISA "); + +/*I/O APICs: APIC ID Version State Address*/ + smp_write_ioapic(mc, m->apicid_8111, 0x11, 0xfec00000); //8111 + { + device_t dev; + struct resource *res; + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, m->apicid_8132_1, 0x11, res->base); + } + } + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, m->apicid_8132_2, 0x11, res->base); + } + } + } + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_8111, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_8111, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_8111, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_8111, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_8111, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x5, m->apicid_8111, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_8111, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_8111, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_8111, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x9, m->apicid_8111, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_8111, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_8111, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_8111, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_8111, 0xf); +//??? What + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ((sysconf.sbdn+1)<<2)|3, m->apicid_8111, 0x13); + +// Onboard AMD USB + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (0<<2)|3, m->apicid_8111, 0x13); + + if(sysconf.pci1234[1] & 0xf) { + // Slot AGP + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8151_1, 0x0, m->apicid_8111, 0x11); + } + +//Slot 3 PCI 32 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (5<<2)|i, m->apicid_8111, 0x10 + (1+i)%4); //16 + } + + +//Slot 4 PCI 32 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (4<<2)|i, m->apicid_8111, 0x10 + (0+i)%4); //16 + } + + +//Slot 1 PCI-X 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, (1<<2)|i, m->apicid_8132_2, (0+i)%4); // + } + + +//Slot 2 PCI-X 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (1<<2)|i, m->apicid_8132_1, (1+i)%4); //25 + } + + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt b/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt new file mode 100644 index 0000000000..2fb327daec --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt @@ -0,0 +1,30 @@ +At this time, For acpi support We got +1. support AMK K8 SRAT --- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c) +2. support MADT ---- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c , src/mainboard/amd/serengeti_cheetah/acpi_tables.c) +3. support DSDT ---- dynamically (Compile time, LinuxBIOS run-time, ACPI run-time) (src/mainboard/amd/serengeti_cheetah/{dx/*, get_bus_conf.c}, src/northbridge/amd/amdk8/get_sblk_pci1234.c) +4. Chipset support: amd8111, amd8132 + +The developers need to change for different MB + +Change dx/dsdt_lb.dsl, according to MB layout + pci1, pci2, pci3, pci4, ...., pci8 + if there is HT-IO board, may use pci2.asl.... to create ssdt2.c, and ssdt3,c and ssdt4.c, ....ssdt8.c + +Change acpi_tables.c + sbdn: Real SB device Num. for 8111 =3 or 1 depend if 8131 presents. ---- Actually you don't need to change it, it is LinuxBIOS run-time configurable now. + if there is HT-IO board, need to adjust SSDTX_NUM...., and preset pci1234 array. acpi_tables.c will decide to put the SSDT on the RSDT or not according if the HT-IO board is installed + +Regarding pci bridge apic and pic + need to modify entries amd8111.asl and amd8131.asl and amd8151.asl.... acording to your MB laybout, it is like that in mptable.c + +About other chipsets, need to develop their special asl such as + ck804.asl --- NB ck804 + bcm5785.asl or bcm5780.asl ---- Serverworks HT1000/HT2000 + +use a to create hex file +use c to delele hex file + +yhlu + +09/18/2005 + diff --git a/src/mainboard/amd/serengeti_cheetah/resourcemap.c b/src/mainboard/amd/serengeti_cheetah/resourcemap.c new file mode 100644 index 0000000000..e42bbcc1af --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/resourcemap.c @@ -0,0 +1,265 @@ +/* + * AMD serengeti_cheetah needs a different resource map + * + */ + +static void setup_serengeti_cheetah_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070013, // AMD 8151 on link0 of CPU 1 + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = sizeof(register_values)/sizeof(register_values[0]); + setup_resource_map(register_values, max); +} + diff --git a/src/mainboard/amd/serengeti_leopard/Config.lb b/src/mainboard/amd/serengeti_leopard/Config.lb index ea92f8e201..3132377563 100644 --- a/src/mainboard/amd/serengeti_leopard/Config.lb +++ b/src/mainboard/amd/serengeti_leopard/Config.lb @@ -56,14 +56,14 @@ end #if HAVE_ACPI_TABLES # object acpi_tables.o # object fadt.o -# if K8_SB_HT_CHAIN_ON_BUS0 +# if SB_HT_CHAIN_ON_BUS0 # object dsdt_bus0.o # else # object dsdt.o # end # object ssdt.o # if ACPI_SSDTX_NUM -# if K8_SB_HT_CHAIN_ON_BUS0 +# if SB_HT_CHAIN_ON_BUS0 # object ssdt2_bus0.o # else # object ssdt2.o @@ -74,7 +74,7 @@ end if HAVE_ACPI_TABLES object acpi_tables.o object fadt.o - if K8_SB_HT_CHAIN_ON_BUS0 + if SB_HT_CHAIN_ON_BUS0 makerule dsdt.c depends "$(MAINBOARD)/dx_bus0/dsdt_lb.dsl" action "/usr/sbin/iasl -tc $(MAINBOARD)/dx_bus0/dsdt_lb.dsl" @@ -98,7 +98,7 @@ if HAVE_ACPI_TABLES object ./ssdt.o if ACPI_SSDTX_NUM - if K8_SB_HT_CHAIN_ON_BUS0 + if SB_HT_CHAIN_ON_BUS0 makerule ssdt2.c depends "$(MAINBOARD)/dx/pci2.asl" action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci2.asl" diff --git a/src/mainboard/amd/serengeti_leopard/Options.lb b/src/mainboard/amd/serengeti_leopard/Options.lb index 4164454c8f..46ea2c2a55 100644 --- a/src/mainboard/amd/serengeti_leopard/Options.lb +++ b/src/mainboard/amd/serengeti_leopard/Options.lb @@ -54,13 +54,13 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK -uses K8_HW_MEM_HOLE_SIZE_AUTO_INC +uses HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZE_AUTO_INC uses K8_HT_FREQ_1G_SUPPORT uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY uses USE_DCACHE_RAM @@ -152,14 +152,14 @@ default CONFIG_CHIP_NAME=1 #memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. #2G -default K8_HW_MEM_HOLE_SIZEK=0x200000 +default HW_MEM_HOLE_SIZEK=0x200000 #1G -#default K8_HW_MEM_HOLE_SIZEK=0x100000 +#default HW_MEM_HOLE_SIZEK=0x100000 #512M -#default K8_HW_MEM_HOLE_SIZEK=0x80000 +#default HW_MEM_HOLE_SIZEK=0x80000 #make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default K8_HW_MEM_HOLE_SIZE_AUTO_INC=1 +#default HW_MEM_HOLE_SIZE_AUTO_INC=1 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -175,7 +175,7 @@ default HT_CHAIN_UNITID_BASE=0x4 default HT_CHAIN_END_UNITID_BASE=0x1 #make the SB HT chain on bus 0 -default K8_SB_HT_CHAIN_ON_BUS0=1 +default SB_HT_CHAIN_ON_BUS0=1 #allow capable device use that above 4G #default CONFIG_PCI_64BIT_PREF_MEM=1 @@ -186,7 +186,7 @@ default K8_SB_HT_CHAIN_ON_BUS0=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcc000 default DCACHE_RAM_SIZE=0x4000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c index f01a824cbf..bb42c0faee 100644 --- a/src/mainboard/arima/hdama/auto.c +++ b/src/mainboard/arima/hdama/auto.c @@ -12,7 +12,6 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" #include -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -22,7 +21,6 @@ #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -141,7 +139,9 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" #include "northbridge/amd/amdk8/resourcemap.c" #include "debug.c" diff --git a/src/mainboard/broadcom/blast/Options.lb b/src/mainboard/broadcom/blast/Options.lb index 02bb6eb035..c64c7cf048 100644 --- a/src/mainboard/broadcom/blast/Options.lb +++ b/src/mainboard/broadcom/blast/Options.lb @@ -53,10 +53,10 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -128,7 +128,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console #default CONFIG_CONSOLE_VGA=1 @@ -141,7 +141,7 @@ default HT_CHAIN_UNITID_BASE=0x6 default HT_CHAIN_END_UNITID_BASE=0x1 #make the SB HT chain on bus 0 -default K8_SB_HT_CHAIN_ON_BUS0=1 +default SB_HT_CHAIN_ON_BUS0=1 ## ## enable CACHE_AS_RAM specifics diff --git a/src/mainboard/ibm/e325/auto.c b/src/mainboard/ibm/e325/auto.c index ff3d9ac45d..be0076847b 100644 --- a/src/mainboard/ibm/e325/auto.c +++ b/src/mainboard/ibm/e325/auto.c @@ -13,7 +13,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -25,7 +24,6 @@ #include "superio/NSC/pc87366/pc87366_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) @@ -125,8 +123,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "mainboard/ibm/e325/resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" #define FIRST_CPU 1 #define SECOND_CPU 1 diff --git a/src/mainboard/ibm/e326/auto.c b/src/mainboard/ibm/e326/auto.c index 203a4571fe..958c7d8ab8 100644 --- a/src/mainboard/ibm/e326/auto.c +++ b/src/mainboard/ibm/e326/auto.c @@ -13,7 +13,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -25,7 +24,6 @@ #include "superio/NSC/pc87366/pc87366_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) @@ -125,8 +123,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "mainboard/ibm/e326/resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" #define FIRST_CPU 1 #define SECOND_CPU 1 diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c index 5f4687c76e..24c6e3d3b2 100644 --- a/src/mainboard/newisys/khepri/auto.c +++ b/src/mainboard/newisys/khepri/auto.c @@ -18,12 +18,10 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -80,11 +78,13 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" /* newisys khepri does not want the default */ #include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" #define NODE_RAM(x) \ .node_id = 0+x, \ diff --git a/src/mainboard/sunw/ultra40/Options.lb b/src/mainboard/sunw/ultra40/Options.lb index 32748f5f1d..a81745390d 100644 --- a/src/mainboard/sunw/ultra40/Options.lb +++ b/src/mainboard/sunw/ultra40/Options.lb @@ -52,7 +52,7 @@ uses CONFIG_GDB_STUB uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT uses USE_DCACHE_RAM @@ -66,7 +66,7 @@ uses LIFT_BSP_APIC_ID uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY ## ROM_SIZE is the size of boot ROM that this board will use. @@ -134,7 +134,7 @@ default CONFIG_LOGICAL_CPUS=1 #default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -146,7 +146,7 @@ default HT_CHAIN_UNITID_BASE=0x0 #default HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index d6db7c1c74..ca1aa186c7 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index 99a018c4e9..092aefb98c 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -123,7 +123,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -136,7 +136,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index 23b239afb4..bcb7a1e4c2 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=0 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index bb92ecfd30..b1e5022c31 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console #default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default K8_HW_MEM_HOLE_SIZEK=0x100000 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index 5dec67a947..da382282c9 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index dcff37450f..5ca7df6a34 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -126,7 +126,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -139,7 +139,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10 diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index 9018364663..366b745151 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -53,7 +53,7 @@ uses CONFIG_GDB_STUB uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT uses USE_DCACHE_RAM @@ -69,7 +69,7 @@ uses CONFIG_PCI_64BIT_PREF_MEM uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY uses CONFIG_LB_MEM_TOPK @@ -137,7 +137,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -149,7 +149,7 @@ default HT_CHAIN_UNITID_BASE=0x0 #default HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 7000126a5d..30e6d617c2 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -53,7 +53,7 @@ uses CONFIG_GDB_STUB uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT uses USE_DCACHE_RAM @@ -63,7 +63,7 @@ uses CONFIG_USE_INIT uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY ## ROM_SIZE is the size of boot ROM that this board will use. @@ -129,7 +129,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -141,7 +141,7 @@ default HT_CHAIN_UNITID_BASE=0x0 #default HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index c3f8ba3f8c..cd367ad029 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -52,7 +52,7 @@ uses CONFIG_GDB_STUB uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT uses USE_DCACHE_RAM @@ -66,7 +66,7 @@ uses LIFT_BSP_APIC_ID uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY ## ROM_SIZE is the size of boot ROM that this board will use. @@ -134,7 +134,7 @@ default CONFIG_LOGICAL_CPUS=1 #default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -146,7 +146,7 @@ default HT_CHAIN_UNITID_BASE=0x0 #default HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index 9cc8fc84f8..9e74b11214 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -126,7 +126,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -139,7 +139,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10 diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index 57e10153a1..cd31cfed6b 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -126,7 +126,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console #default CONFIG_CONSOLE_VGA=1 @@ -139,7 +139,7 @@ default K8_HW_MEM_HOLE_SIZEK=0x100000 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10 -- cgit v1.2.3