From f393d43b97b83de500feaddcca52f02f9ecf1ceb Mon Sep 17 00:00:00 2001 From: jasper lee Date: Mon, 5 Mar 2018 20:01:42 +0800 Subject: mb/google/poppy/variants/nami: Add WACOM EMR support Add WACOM EMR in devicetree I2C #2. BUG=b:72062737 BRANCH=master TEST=Verify EMR on nami Change-Id: Icbe809a48959e5749262aeb1b89b09c4bdafbbc2 Signed-off-by: jasper lee Reviewed-on: https://review.coreboot.org/24997 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh --- src/mainboard/google/poppy/variants/nami/devicetree.cb | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'src/mainboard') diff --git a/src/mainboard/google/poppy/variants/nami/devicetree.cb b/src/mainboard/google/poppy/variants/nami/devicetree.cb index 9d6dcd858b..8e2ebc1644 100644 --- a/src/mainboard/google/poppy/variants/nami/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nami/devicetree.cb @@ -269,7 +269,20 @@ chip soc/intel/skylake device i2c 15 on end end end # I2C #1 - device pci 15.2 on end # I2C #2 + device pci 15.2 on + chip drivers/i2c/hid + register "generic.hid" = ""WCOM005C"" + register "generic.desc" = ""WCOM Digitizer"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D1_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D3)" + register "generic.reset_delay_ms" = "20" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x1" + device i2c 0x9 on end + end + end # I2C #2 device pci 15.3 on chip drivers/generic/max98357a register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A23)" -- cgit v1.2.3