From f9ef2081bab5247a30dec92d09148224256ad92d Mon Sep 17 00:00:00 2001 From: Harald Gutmann Date: Sat, 3 Oct 2009 21:06:53 +0000 Subject: Add gigabyte/m57sli support to Kconfig. Whitespace fixes to devicetree.cb Signed-off-by: Harald Gutmann Acked-by: Patrick Georgi git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4715 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/gigabyte/Kconfig | 3 +- src/mainboard/gigabyte/m57sli/Kconfig | 153 ++++++++++++ src/mainboard/gigabyte/m57sli/Makefile.inc | 67 ++++++ src/mainboard/gigabyte/m57sli/devicetree.cb | 349 +++++++++++++--------------- 4 files changed, 383 insertions(+), 189 deletions(-) create mode 100644 src/mainboard/gigabyte/m57sli/Kconfig create mode 100644 src/mainboard/gigabyte/m57sli/Makefile.inc (limited to 'src/mainboard') diff --git a/src/mainboard/gigabyte/Kconfig b/src/mainboard/gigabyte/Kconfig index ad5003c2c5..847460db94 100644 --- a/src/mainboard/gigabyte/Kconfig +++ b/src/mainboard/gigabyte/Kconfig @@ -21,8 +21,9 @@ choice prompt "Mainboard model" depends on VENDOR_GIGABYTE - + source "src/mainboard/gigabyte/ga-6bxc/Kconfig" +source "src/mainboard/gigabyte/m57sli/Kconfig" endchoice diff --git a/src/mainboard/gigabyte/m57sli/Kconfig b/src/mainboard/gigabyte/m57sli/Kconfig new file mode 100644 index 0000000000..124d1d9708 --- /dev/null +++ b/src/mainboard/gigabyte/m57sli/Kconfig @@ -0,0 +1,153 @@ + +config BOARD_GIGABYTE_M57SLI + bool "M57SLI" + select ARCH_X86 + select CPU_AMD_K8 + select CPU_AMD_SOCKET_AM2 + select NORTHBRIDGE_AMD_AMDK8 + select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX + select SOUTHBRIDGE_NVIDIA_MCP55 + select SUPERIO_ITE_IT8716F + select PIRQ_TABLE + select USE_PRINTK_IN_CAR + select USE_DCACHE_RAM + select HAVE_HARD_RESET + select HAVE_HIGH_TABLES + select IOAPIC + select MEM_TRAIN_SEQ + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select HAVE_ACPI_TABLES + select K8_REV_F_SUPPORT + select PCI_ROM_RUN + select CONSOLE_VGA + select HAVE_FANCTL + +config MAINBOARD_DIR + string + default gigabyte/m57sli + depends on BOARD_GIGABYTE_M57SLI + +config DCACHE_RAM_BASE + hex + default 0xc8000 + depends on BOARD_GIGABYTE_M57SLI + +config DCACHE_RAM_SIZE + hex + default 0x08000 + depends on BOARD_GIGABYTE_M57SLI + +config DCACHE_RAM_GLOBAL_VAR_SIZE + hex + default 0x01000 + depends on BOARD_GIGABYTE_M57SLI + +config APIC_ID_OFFSET + hex + default 16 + depends on BOARD_GIGABYTE_M57SLI + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + depends on BOARD_GIGABYTE_M57SLI + +config LB_CKS_RANGE_START + int + default 49 + depends on BOARD_GIGABYTE_M57SLI + +config LB_CKS_RANGE_END + int + default 122 + depends on BOARD_GIGABYTE_M57SLI + +config LB_CKS_LOC + int + default 123 + depends on BOARD_GIGABYTE_M57SLI + +config MAINBOARD_PART_NUMBER + string + default "m57sli" + depends on BOARD_GIGABYTE_M57SLI + +config PCI_64BIT_PREF_MEM + bool + default n + depends on BOARD_GIGABYTE_M57SLI + +config HAVE_FALLBACK_BOOT + bool + default n + depends on BOARD_GIGABYTE_M57SLI + +config USE_FALLBACK_IMAGE + bool + default n + depends on BOARD_GIGABYTE_M57SLI + +config HW_MEM_HOLE_SIZEK + hex + default 0x100000 + depends on BOARD_GIGABYTE_M57SLI + +config USE_FAILOVER_IMAGE + bool + default n + depends on BOARD_GIGABYTE_M57SLI + +config MAX_CPUS + int + default 2 + depends on BOARD_GIGABYTE_M57SLI + +config MAX_PHYSICAL_CPUS + int + default 1 + depends on BOARD_GIGABYTE_M57SLI + +config AP_CODE_IN_CAR + bool + default n + depends on BOARD_GIGABYTE_M57SLI + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + depends on BOARD_GIGABYTE_M57SLI + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + depends on BOARD_GIGABYTE_M57SLI + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x0 + depends on BOARD_GIGABYTE_M57SLI + +config USE_INIT + bool + default n + depends on BOARD_GIGABYTE_M57SLI + +config SERIAL_CPU_INIT + bool + default n + depends on BOARD_GIGABYTE_M57SLI + +config WAIT_BEFORE_CPUS_INIT + bool + default n + depends on BOARD_GIGABYTE_M57SLI + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1022 + depends on BOARD_GIGABYTE_M57SLI + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x2b80 + depends on BOARD_GIGABYTE_M57SLI diff --git a/src/mainboard/gigabyte/m57sli/Makefile.inc b/src/mainboard/gigabyte/m57sli/Makefile.inc new file mode 100644 index 0000000000..a225e61304 --- /dev/null +++ b/src/mainboard/gigabyte/m57sli/Makefile.inc @@ -0,0 +1,67 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +driver-y += mainboard.o + +#needed by irq_tables and mptable and acpi_tables +obj-y += get_bus_conf.o +obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o +obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_HAVE_FANCTL) += fanctl.o + +# This is part of the conversion to init-obj and away from included code. +initobj-y += crt0.o +crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc +crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc +crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc +crt0-y += ../../../../src/arch/i386/lib/id.inc +crt0-y += ../../../../src/cpu/amd/car/cache_as_ram.inc +crt0-y += auto.inc + +ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb +ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds +ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds +ldscript-y += ../../../../src/arch/i386/lib/id.lds +ldscript-y += ../../../../src/arch/i386/lib/failover.lds +ldscript-$(CONFIG_AP_CODE_IN_CAR) += ../../../../src/arch/i386/init/ldscript_apc.lb + +ifdef POST_EVALUATION + +$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + iasl -p $(obj)/dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + mv $(obj)/dsdt.hex $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/apc_auto.o: $(src)/mainboard/$(MAINBOARDDIR)/apc_auto.c $(obj)/option_table.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/apc_auto.c -o $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@ + perl -e 's/\.rodata/.rom.data/g' -pi $@ + perl -e 's/\.text/.section .rom.text/g' -pi $@ + +endif diff --git a/src/mainboard/gigabyte/m57sli/devicetree.cb b/src/mainboard/gigabyte/m57sli/devicetree.cb index 60692d664a..0c5dd3b09f 100644 --- a/src/mainboard/gigabyte/m57sli/devicetree.cb +++ b/src/mainboard/gigabyte/m57sli/devicetree.cb @@ -1,202 +1,175 @@ chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_AM2 - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdk8 #mc0 - device pci 18.0 on - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/mcp55 - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8716f - # Floppy and any LDN - device pnp 2e.0 off - # Watchdog from CLKIN, CLKIN = 24 MHz - irq 0x23 = 0x11 + device apic_cluster 0 on + chip cpu/amd/socket_AM2 + device apic 0 on end + end +end +device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on + chip southbridge/nvidia/mcp55 + device pci 0.0 on end + device pci 1.0 on + chip superio/ite/it8716f + # Floppy and any LDN + device pnp 2e.0 on + # Watchdog from CLKIN, CLKIN = 24 MHz + irq 0x23 = 0x11 # Serial Flash (SPI only) - #0x24 = 0x1a - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 9 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO, SPI flash - # pin 84 is not GP10 - irq 0x25 = 0x0 - # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20 - irq 0x26 = 0x43 - # pin 13 is GP35 - irq 0x27 = 0x20 - # pin 70 is not GP46 - #irq 0x28 = 0x0 - # pin 6,3,128,127,126 is GP63,64,65,66,67 - irq 0x29 = 0x81 - # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V - #irq 0x2c = 0x1f - # Simple I/O base - io 0x62 = 0x800 - # Serial Flash I/O (SPI only) - io 0x64 = 0x820 - # watch dog force timeout (parallel flash only) - #irq 0x71 = 0x1 - # No WDT interrupt - irq 0x72 = 0x0 - # GPIO pin set 1 disable internal pullup - irq 0xb8 = 0x0 - # GPIO pin set 5 enable internal pullup - irq 0xbc = 0x01 - # SIO pin set 1 alternate function - #irq 0xc0 = 0x0 - # SIO pin set 2 mixed function - irq 0xc1 = 0x43 - # SIO pin set 3 mixed function - irq 0xc2 = 0x20 - # SIO pin set 4 alternate function - #irq 0xc3 = 0x0 - # SIO pin set 1 input mode - #irq 0xc8 = 0x0 - # SIO pin set 2 input mode - irq 0xc9 = 0x0 - # SIO pin set 4 input mode - #irq 0xcb = 0x0 - # Generate SMI# on EC IRQ - #irq 0xf0 = 0x10 - # SMI# level trigger - #irq 0xf1 = 0x40 - # HWMON alert beep pin location - irq 0xf6 = 0x28 - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 10 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR + #0x24 = 0x1a + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 9 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO, SPI flash + # pin 84 is not GP10 + irq 0x25 = 0x0 + # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20 + irq 0x26 = 0x43 + # pin 13 is GP35 + irq 0x27 = 0x20 + # pin 70 is not GP46 + #irq 0x28 = 0x0 + # pin 6,3,128,127,126 is GP63,64,65,66,67 + irq 0x29 = 0x81 + # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V + #irq 0x2c = 0x1f + # Simple I/O base + io 0x62 = 0x800 + # Serial Flash I/O (SPI only) + io 0x64 = 0x820 + # watch dog force timeout (parallel flash only) + #irq 0x71 = 0x1 + # No WDT interrupt + irq 0x72 = 0x0 + # GPIO pin set 1 disable internal pullup + irq 0xb8 = 0x0 + # GPIO pin set 5 enable internal pullup + irq 0xbc = 0x01 + # SIO pin set 1 alternate function + #irq 0xc0 = 0x0 + # SIO pin set 2 mixed function + irq 0xc1 = 0x43 + # SIO pin set 3 mixed function + irq 0xc2 = 0x20 + # SIO pin set 4 alternate function + #irq 0xc3 = 0x0 + # SIO pin set 1 input mode + #irq 0xc8 = 0x0 + # SIO pin set 2 input mode + irq 0xc9 = 0x0 + # SIO pin set 4 input mode + #irq 0xcb = 0x0 + # Generate SMI# on EC IRQ + #irq 0xf0 = 0x10 + # SMI# level trigger + #irq 0xf1 = 0x40 + # HWMON alert beep pin location + irq 0xf6 = 0x28 + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off # CIR end end - device pci 1.1 on # SM 0 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end - end # SM -#WTF?!? We already have device pci 1.1 in the section above - device pci 1.1 on # SM 1 -#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? -# chip drivers/generic/generic #PCIXA Slot1 -# device i2c 50 on end -# end -# chip drivers/generic/generic #PCIXB Slot1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #PCIXB Slot2 -# device i2c 52 on end -# end -# chip drivers/generic/generic #PCI Slot1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #Master MCP55 PCI-E -# device i2c 54 on end -# end -# chip drivers/generic/generic #Slave MCP55 PCI-E -# device i2c 55 on end -# end - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end - - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 off end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" + end + device pci 1.1 on + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # AUDIO + device pci 8.0 on end # NIC + device pci 9.0 off end # N/A + device pci a.0 on end # PCI E 5 + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 register "mac_eeprom_addr" = "0x51" end - end # device pci 18.0 + end #device pci 18.0 device pci 18.0 on end # Link 1 - device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end # mc0 - end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 on end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # io -# device pnp 0.9 off end # io -# end + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end + end #root_complex -- cgit v1.2.3