From 2f91403303a66c5e724761a74863e3452291b154 Mon Sep 17 00:00:00 2001 From: Martin Roth Date: Fri, 15 Jan 2016 10:20:11 -0700 Subject: src: Fix various spelling and whitespace issues. This fixes some spelling and whitespace issues that I came across while working on various things in the tree. There are no functional changes. Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab Signed-off-by: Martin Roth Reviewed-on: https://review.coreboot.org/13016 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/northbridge/amd/amdk8/raminit_f.c | 54 +++++++++++++++---------------- src/northbridge/amd/amdk8/raminit_f_dqs.c | 14 ++++---- 2 files changed, 34 insertions(+), 34 deletions(-) (limited to 'src/northbridge/amd/amdk8') diff --git a/src/northbridge/amd/amdk8/raminit_f.c b/src/northbridge/amd/amdk8/raminit_f.c index f258cca7cf..cd4b9fbf52 100644 --- a/src/northbridge/amd/amdk8/raminit_f.c +++ b/src/northbridge/amd/amdk8/raminit_f.c @@ -64,7 +64,7 @@ index: Write: - Write the data to DctOffsetData - Write register num to DctOffset with DctAccessWrite = 1 - - poll the DctAccessDone untio it = 1 + - poll the DctAccessDone until it = 1 */ @@ -153,7 +153,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * 100 = reserved * 101 = reserved * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * 111 = Interleave on A[12] and A[13] and A[14] (8 nodes) * [15:11] Reserved * [13:16] DRAM Base Address i Bits 39-24 * This field defines the upper address bits of a 40-bit address @@ -232,7 +232,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * 100 = 2.5 Memory Clocks * 101 = 3 Memory Clocks * 110 = 3.5 Memory Clocks - * 111 = Reseved + * 111 = Reserved * [15: 7] Reserved * [16:16] AltVidC3MemClkTriEn (AltVID Memory Clock Tristate Enable) * Enables the DDR memory clocks to be tristated when alternate VID @@ -244,19 +244,19 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * [18:18] DqsRcvEnTrain (DQS Receiver Enable Training Mode) * 0 = Normal DQS Receiver enable operation * 1 = DQS receiver enable training mode - * [31:19] reverved + * [31:19] reserved */ PCI_ADDR(0, 0x18, 2, 0x78), 0xfff80000, (6<<4)|(6<<0), /* DRAM Initialization Register * F2:0x7C * [15: 0] MrsAddress (Address for MRS/EMRS Commands) - * this field specifies the dsata driven on the DRAM address pins + * this field specifies the data driven on the DRAM address pins * 15-0 for MRS and EMRS commands * [18:16] MrsBank (Bank Address for MRS/EMRS Commands) * this files specifies the data driven on the DRAM bank pins for * the MRS and EMRS commands - * [23:19] reverved + * [23:19] reserved * [24:24] SendPchgAll (Send Precharge All Command) * Setting this bit causes the DRAM controller to send a precharge * all command. This bit is cleared by the hardware after the @@ -268,7 +268,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * [26:26] SendMrsCmd (Send MRS/EMRS Command) * Setting this bit causes the DRAM controller to send the MRS or * EMRS command defined by the MrsAddress and MrsBank fields. This - * bit is cleared by the hardware adter the commmand completes + * bit is cleared by the hardware after the command completes * [27:27] DeassertMemRstX (De-assert Memory Reset) * Setting this bit causes the DRAM controller to de-assert the * memory reset pin. This bit cannot be used to assert the memory @@ -276,7 +276,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * [28:28] AssertCke (Assert CKE) * setting this bit causes the DRAM controller to assert the CKE * pins. This bit cannot be used to de-assert the CKE pins - * [30:29] reverved + * [30:29] reserved * [31:31] EnDramInit (Enable DRAM Initialization) * Setting this bit puts the DRAM controller in a BIOS controlled * DRAM initialization mode. BIOS must clear this bit aster DRAM @@ -388,7 +388,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * 111 = 9 bus clocks * [ 7: 7] Reserved * [ 9: 8] Twtr (Internal DRAM Write-to-Read Command Delay, - * minium write-to-read delay when both access the same chip select) + * Minimum write-to-read delay when both access the same chip select) * 00 = Reserved * 01 = 1 bus clocks * 10 = 2 bus clocks @@ -408,7 +408,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * 00 = 2 bus clocks ( 1 idle cycle on the bus) * 01 = 3 bus clocks ( 2 idle cycles on the bus) * 10 = 4 bus clocks ( 3 idle cycles on the bus) - * 11 = 5 bus clocks ( 4 idel cycles on the bus) + * 11 = 5 bus clocks ( 4 idle cycles on the bus) * [17:16] Tref (Refresh Rate) * 00 = Undefined behavior * 01 = Reserved @@ -487,7 +487,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * 010 = 333MHz * 011 = reserved * 1xx = reserved - * [ 3: 3] MemClkFreqVal (Memory Clock Freqency Valid) + * [ 3: 3] MemClkFreqVal (Memory Clock Frequency Valid) * 1 = BIOS need to set the bit when setting up MemClkFreq to * the proper value * [ 7: 4] MaxAsyncLat ( Maximum Asynchronous Latency) @@ -523,7 +523,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * MEMCLK cycle * 1 = One additional MEMCLK of setup time is provided on all * DRAM address and control signals except CS, CKE, and ODT; - * i.e., these signals are drivern for two MEMCLK cycles + * i.e., these signals are driven for two MEMCLK cycles * rather than one * [21:21] Reserved * [22:22] BankSwizzleMode ( Bank Swizzle Mode), @@ -565,7 +565,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * 1 When bit enables support for mismatched DIMMs when using * 128-bit DRAM interface, the Width128 no effect, only for * AM2 and s1g1 - * [ 5: 5] DCC_EN ( Dynamica Idle Cycle Counter Enable) + * [ 5: 5] DCC_EN ( Dynamic Idle Cycle Counter Enable) * When set to 1, indicates that each entry in the page tables * dynamically adjusts the idle cycle limit based on page * Conflict/Page Miss (PC/PM) traffic @@ -581,7 +581,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * [ 9: 9] DramEnabled ( DRAM Enabled) * When Set, this bit indicates that the DRAM is enabled, this * bit is set by hardware after DRAM initialization or on an exit - * from self refresh. The DRAM controller is intialized after the + * from self refresh. The DRAM controller is initialized after the * hardware-controlled initialization process ( initiated by the * F2 0x90[DramInit]) completes or when the BIOS-controlled * initialization process completes (F2 0x7c(EnDramInit] is @@ -603,7 +603,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in /* DRAM Scrub Control Register * F3:0x58 - * [ 4: 0] DRAM Scrube Rate + * [ 4: 0] DRAM Scrub Rate * [ 7: 5] reserved * [12: 8] L2 Scrub Rate * [15:13] reserved @@ -646,7 +646,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000, /* DRAM Scrub Address High Register * F3:0x60 - * [ 7: 0] DRAM Scrubb Address 39-32 + * [ 7: 0] DRAM Scrub Address 39-32 * [31: 8] Reserved */ PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000, @@ -673,7 +673,7 @@ index: Write: - Write the data to DctOffsetData - Write register num to DctOffset with DctAccessWrite = 1 - - poll the DctAccessDone untio it = 1 + - poll the DctAccessDone until it = 1 */ int i; @@ -1161,7 +1161,7 @@ static unsigned long interleave_chip_selects(const struct mem_controller *ctrl, csbase_inc <<=1; } - /* Compute the initial values for csbase and csbask. + /* Compute the initial values for csbase and csmask. * In csbase just set the enable bit and the base to zero. * In csmask set the mask bits for the size and page level interleave. */ @@ -1196,7 +1196,7 @@ static unsigned long order_chip_selects(const struct mem_controller *ctrl) /* Remember which registers we have used in the high 8 bits of tom */ tom = 0; for (;;) { - /* Find the largest remaining canidate */ + /* Find the largest remaining candidate */ unsigned index, canidate; uint32_t csbase, csmask; unsigned size; @@ -1220,12 +1220,12 @@ static unsigned long order_chip_selects(const struct mem_controller *ctrl) if (tom & (1 << (index + 24))) { continue; } - /* I have a new canidate */ + /* I have a new candidate */ csbase = value; canidate = index; } - /* See if I have found a new canidate */ + /* See if I have found a new candidate */ if (csbase == 0) { break; } @@ -1352,7 +1352,7 @@ static long spd_handle_unbuffered_dimms(const struct mem_controller *ctrl, if (is_opteron(ctrl)) { #if 0 if ( registered != (meminfo->dimm_mask & ((1<dimm_mask &= (registered | (registered << DIMM_SOCKETS) ); //disable unbuffed dimm + meminfo->dimm_mask &= (registered | (registered << DIMM_SOCKETS) ); //disable unbuffered dimm // die("Mixed buffered and registered dimms not supported"); } //By yhlu for debug M2, s1g1 can do dual channel, but it use unbuffer DIMM @@ -1503,7 +1503,7 @@ static long spd_enable_2channels(const struct mem_controller *ctrl, struct mem_i printk(BIOS_SPEW, "Enabling dual channel memory\n"); dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); dcl &= ~DCL_BurstLength32; /* 32byte mode may be preferred in platforms that include graphics controllers that generate a lot of 32-bytes system memory accesses - 32byte mode is not supported when the DRAM interface is 128 bits wides, even 32byte mode is set, system still use 64 byte mode */ + 32byte mode is not supported when the DRAM interface is 128 bits wide, even 32byte mode is set, system still use 64 byte mode */ dcl |= DCL_Width128; pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); meminfo->is_Width128 = 1; @@ -1720,8 +1720,8 @@ static int find_optimum_spd_latency(u32 spd_device, unsigned *min_latency, unsig /* Compute the lowest cas latency which can be expressed in this * particular SPD EEPROM. You can store at most settings for 3 * contiguous CAS latencies, so by taking the highest CAS - * latency maked as supported in the SPD and subtracting 2 you - * get the lowest expressable CAS latency. That latency is not + * latency marked as supported in the SPD and subtracting 2 you + * get the lowest expressible CAS latency. That latency is not * necessarily supported, but a (maybe invalid) entry exists * for it. */ @@ -2495,7 +2495,7 @@ static void set_max_async_latency(const struct mem_controller *ctrl, const struc dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); dch &= ~(DCH_MaxAsyncLat_MASK << DCH_MaxAsyncLat_SHIFT); - //FIXME: We need to use Max of DqsRcvEnDelay + 6ns here: After trainning and get that from index reg 0x10, 0x13, 0x16, 0x19, 0x30, 0x33, 0x36, 0x39 + //FIXME: We need to use Max of DqsRcvEnDelay + 6ns here: After training and get that from index reg 0x10, 0x13, 0x16, 0x19, 0x30, 0x33, 0x36, 0x39 async_lat = 6 + 6; @@ -2873,7 +2873,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl, if (meminfo->dimm_mask == -1) goto hw_spd_err; - //store memclk set to sysinfo, incase we need rebuilt param again + //store memclk set to sysinfo, in case we need rebuilt param again meminfo->memclk_set = param->dch_memclk; memcpy(¶mx, param, sizeof(paramx)); diff --git a/src/northbridge/amd/amdk8/raminit_f_dqs.c b/src/northbridge/amd/amdk8/raminit_f_dqs.c index 23ec60dac8..0b777d18ac 100644 --- a/src/northbridge/amd/amdk8/raminit_f_dqs.c +++ b/src/northbridge/amd/amdk8/raminit_f_dqs.c @@ -585,7 +585,7 @@ static unsigned TrainRcvrEn(const struct mem_controller *ctrl, unsigned Pass, st print_debug_dqs("\tTrainRcvEn51: channel ",channel, 1); /* for each rank */ - /* there are four recriver pairs, loosely associated with CS */ + /* there are four receiver pairs, loosely associated with CS */ for( receiver = 0; (receiver < 8) && (!Errors); receiver+=2) { @@ -664,14 +664,14 @@ static unsigned TrainRcvrEn(const struct mem_controller *ctrl, unsigned Pass, st /* FIXME: 64bit MUX */ if(is_Width128) { - /* Program current Receiver enable delay chaannel b */ + /* Program current Receiver enable delay channel b */ pci_write_config32_index_wait(ctrl->f2, 0x98, index+ 0x20, RcvrEnDly); } /* Program the MaxAsyncLat filed with the current DQS receiver enable setting plus 6ns */ - /*Porgram MaxAsyncLat to correspond with current delay */ + /* Program MaxAsyncLat to correspond with current delay */ SetMaxAL_RcvrDly(ctrl, RcvrEnDly); CurrTest = DQS_FAIL; @@ -688,7 +688,7 @@ static unsigned TrainRcvrEn(const struct mem_controller *ctrl, unsigned Pass, st if(Test0 == DQS_PASS) { Read1LTestPattern(TestAddr0B); - Test1 = CompareTestPatternQW0(channel, TestAddr0B, PatternB, TestPattern0, TestPattern1, TestPattern2, Pass, is_Width128); + Test1 = CompareTestPatternQW0(channel, TestAddr0B, PatternB, TestPattern0, TestPattern1, TestPattern2, Pass, is_Width128); proc_IOCLFLUSH(TestAddr0B); ResetDCTWrPtr(ctrl); @@ -755,7 +755,7 @@ static unsigned TrainRcvrEn(const struct mem_controller *ctrl, unsigned Pass, st } if(Pass == DQS_FIRST_PASS) { - // We need a better value for DQSPos trainning + // We need a better value for DQSPos training RcvrEnDly = RcvrEnDlyRmin /* + RCVREN_MARGIN * T1000/64/50 */; } else { RcvrEnDly = RcvrEnDlyRmin; @@ -1641,7 +1641,7 @@ static void set_var_mtrr_dqs( } -/* fms: find most sigificant bit set, stolen from Linux Kernel Source. */ +/* fms: find most significant bit set, stolen from Linux Kernel Source. */ static inline unsigned int fms(unsigned int x) { int r; @@ -1653,7 +1653,7 @@ static inline unsigned int fms(unsigned int x) return r; } -/* fls: find least sigificant bit set */ +/* fls: find least significant bit set */ static inline unsigned int fls(unsigned int x) { int r; -- cgit v1.2.3