From 77d5e7481b56ac396e02e73259d1fb414b375470 Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Thu, 3 Jan 2019 21:11:45 +0100 Subject: nb/intel/haswell: Add an option for where verstage starts Previously Haswell used a romcc bootblock and starting verstage in romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also possible to have a separate verstage. This selects using a separate verstage by default but still keeps the option around to use verstage in romstage. Also make sure mrc.bin is only added to the COREBOOT fmap region as it requires to be run at a specific offset. This means that coreboot will have to jump from a RW region to the RO region for that binary and back to that RW region after that binary is done initializing the memory. Change-Id: I3b7b29f4a24c0fb830ff76fe31a35b6afcae4e67 Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/coreboot/+/26926 Reviewed-by: Duncan Laurie Reviewed-by: Patrick Rudolph Tested-by: build bot (Jenkins) --- src/northbridge/intel/haswell/Kconfig | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'src/northbridge/intel/haswell/Kconfig') diff --git a/src/northbridge/intel/haswell/Kconfig b/src/northbridge/intel/haswell/Kconfig index 242ab18c49..e0c55d2f92 100644 --- a/src/northbridge/intel/haswell/Kconfig +++ b/src/northbridge/intel/haswell/Kconfig @@ -27,9 +27,25 @@ config NORTHBRIDGE_INTEL_HASWELL if NORTHBRIDGE_INTEL_HASWELL +config HASWELL_VBOOT_IN_BOOTBLOCK + depends on VBOOT + bool "Start verstage in bootblock" + default y + select VBOOT_STARTS_IN_BOOTBLOCK + select VBOOT_SEPARATE_VERSTAGE + help + Haswell can either start verstage in a separate stage + right after the bootblock has run or it can start it + after romstage for compatibility reasons. + Haswell however uses a mrc.bin to initialse memory which + needs to be located at a fixed offset. Therefore even with + a separate verstage starting after the bootblock that same + binary is used meaning a jump is made from RW to the RO region + and back to the RW region after the binary is done. + config VBOOT select VBOOT_OPROM_MATTERS - select VBOOT_STARTS_IN_ROMSTAGE + select VBOOT_STARTS_IN_ROMSTAGE if !HASWELL_VBOOT_IN_BOOTBLOCK config VGA_BIOS_ID string @@ -93,4 +109,11 @@ config PRE_GRAPHICS_DELAY VBIOS. On those systems we need to wait for a bit before executing the VBIOS. +# The UEFI System Agent binary needs to be at a fixed offset in the flash +# and can therefore only reside in the COREBOOT fmap region +config RO_REGION_ONLY + string + depends on VBOOT + default "mrc.bin" + endif -- cgit v1.2.3