From c01a505282526a7038463e937cbec83f704a6a89 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ky=C3=B6sti=20M=C3=A4lkki?= Date: Wed, 30 Jan 2019 09:39:23 +0200 Subject: sb/intel/common: Rename i2c_block_read() to i2c_eeprom_read() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Datasheets describe the used command as 'I2C Read' but adding the word 'eeprom' in between should avoid further confusion with other block commands. Followups will add a symmetrical pair of commands i2c_block_read() and i2c_block_write() that operate via I2C_EN bit and have a 32 byte size restriction on block transfers. For some hardware revision these block commands are available, while 'I2C Read' was not. Change-Id: I4494ab2985afc7f737ddacc8d706a5d5395e35cf Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/c/31151 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: HAOUAS Elyes Reviewed-by: Arthur Heymans --- src/northbridge/intel/i945/raminit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/northbridge/intel/i945') diff --git a/src/northbridge/intel/i945/raminit.c b/src/northbridge/intel/i945/raminit.c index f3c3df68ac..dece9bffae 100644 --- a/src/northbridge/intel/i945/raminit.c +++ b/src/northbridge/intel/i945/raminit.c @@ -381,7 +381,7 @@ static void gather_common_timing(struct sys_info *sysinfo, * only the first 64 bytes contain data needed for raminit. */ - bytes_read = i2c_block_read(device, 0, 64, raw_spd); + bytes_read = i2c_eeprom_read(device, 0, 64, raw_spd); printk(BIOS_DEBUG, "Reading SPD using i2c block operation.\n"); if (IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) && bytes_read > 0) hexdump(raw_spd, bytes_read); -- cgit v1.2.3