From 1c8cd59f3c9248f0954a5cf215dc3652ccfc8da5 Mon Sep 17 00:00:00 2001 From: "arch import user (historical)" Date: Wed, 6 Jul 2005 17:15:54 +0000 Subject: Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-38 Creator: Li-Ta Lo emulator update x96emu update from Paulo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/via/vt8601/northbridge.c | 4 + src/northbridge/via/vt8601/raminit.c | 213 +++++++++++++++---------------- 2 files changed, 110 insertions(+), 107 deletions(-) (limited to 'src/northbridge') diff --git a/src/northbridge/via/vt8601/northbridge.c b/src/northbridge/via/vt8601/northbridge.c index cf8e82907c..b578a975e4 100644 --- a/src/northbridge/via/vt8601/northbridge.c +++ b/src/northbridge/via/vt8601/northbridge.c @@ -29,6 +29,8 @@ static void northbridge_init(device_t dev) pci_write_config8(dev, 0x76, 0x52); } + + static struct device_operations northbridge_operations = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, @@ -44,6 +46,8 @@ static struct pci_driver northbridge_driver __pci_driver = { .device = 0x0601, /* 0x8601 is the AGP bridge? */ }; + + #define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM) static void pci_domain_read_resources(device_t dev) diff --git a/src/northbridge/via/vt8601/raminit.c b/src/northbridge/via/vt8601/raminit.c index 1aa58224f7..71ac010156 100644 --- a/src/northbridge/via/vt8601/raminit.c +++ b/src/northbridge/via/vt8601/raminit.c @@ -47,30 +47,32 @@ it with the version available from LANL. #define DIMM_CL2 0 #endif -void dimms_read(unsigned long x) +void dimms_read(unsigned long x) { uint8_t c; - unsigned long eax; + unsigned long eax; volatile unsigned long y; - eax = x; - for (c = 0; c < 6; c++) { - y = *(volatile unsigned long *) eax; + eax = x; + for(c = 0; c < 6; c++) { + y = * (volatile unsigned long *) eax; eax += 0x10000000; } } -void dimms_write(int x) +void dimms_write(int x) { uint8_t c; unsigned long eax = x; - for (c = 0; c < 6; c++) { + for(c = 0; c < 6; c++) { *(volatile unsigned long *) eax = 0; eax += 0x10000000; } } + + #ifdef DEBUG_SETNORTHB -void setnorthb(device_t north, uint8_t reg, uint8_t val) +void setnorthb(device_t north, uint8_t reg, uint8_t val) { print_debug("setnorth: reg "); print_debug_hex8(reg); @@ -83,108 +85,108 @@ void setnorthb(device_t north, uint8_t reg, uint8_t val) #define setnorthb pci_write_config8 #endif -void dumpnorth(device_t north) +void +dumpnorth(device_t north) { unsigned int r, c; - for (r = 0;; r += 16) { + for(r = 0; ; r += 16) { print_debug_hex8(r); print_debug(":"); - for (c = 0; c < 16; c++) { - print_debug_hex8(pci_read_config8(north, r + c)); + for(c = 0; c < 16; c++) { + print_debug_hex8(pci_read_config8(north, r+c)); print_debug(" "); } print_debug("\r\n"); if (r >= 240) break; - } + } } -static void sdram_set_registers(const struct mem_controller *ctrl) +static void sdram_set_registers(const struct mem_controller *ctrl) { - device_t north = (device_t) PCI_DEV(0, 0, 0); + device_t north = (device_t) 0; uint8_t c, r; print_err("vt8601 init starting\r\n"); + north = pci_locate_device(PCI_ID(0x1106, 0x8601), 0); + north = 0; print_debug_hex32(north); print_debug(" is the north\n"); print_debug_hex16(pci_read_config16(north, 0)); print_debug(" "); print_debug_hex16(pci_read_config16(north, 2)); print_debug("\r\n"); - + /* All we are doing now is setting initial known-good values that will * be revised later as we read SPD - */ - + */ // memory clk enable. We are not using ECC - pci_write_config8(north, 0x78, 0x01); + pci_write_config8(north,0x78, 0x01); print_debug_hex8(pci_read_config8(north, 0x78)); - // dram control, see the book. #if DIMM_PC133 - pci_write_config8(north, 0x68, 0x52); + pci_write_config8(north,0x68, 0x52); #else - pci_write_config8(north, 0x68, 0x42); + pci_write_config8(north,0x68, 0x42); #endif - // dram control, see the book. - pci_write_config8(north, 0x6B, 0x0c); - + pci_write_config8(north,0x6B, 0x0c); // Initial setting, 256MB in each bank, will be rewritten later. - pci_write_config8(north, 0x5A, 0x20); + pci_write_config8(north,0x5A, 0x20); print_debug_hex8(pci_read_config8(north, 0x5a)); - pci_write_config8(north, 0x5B, 0x40); - pci_write_config8(north, 0x5C, 0x60); - pci_write_config8(north, 0x5D, 0x80); - pci_write_config8(north, 0x5E, 0xA0); - pci_write_config8(north, 0x5F, 0xC0); + pci_write_config8(north,0x5B, 0x40); + pci_write_config8(north,0x5C, 0x60); + pci_write_config8(north,0x5D, 0x80); + pci_write_config8(north,0x5E, 0xA0); + pci_write_config8(north,0x5F, 0xC0); // It seems we have to take care of these 2 registers as if // they are bank 6 and 7. - pci_write_config8(north, 0x56, 0xC0); - pci_write_config8(north, 0x57, 0xC0); - + pci_write_config8(north,0x56, 0xC0); + pci_write_config8(north,0x57, 0xC0); + // SDRAM in all banks - pci_write_config8(north, 0x60, 0x3F); - + pci_write_config8(north,0x60, 0x3F); // DRAM timing. I'm suspicious of this // This is for all banks, 64 is 0,1. 65 is 2,3. 66 is 4,5. // ras precharge 4T, RAS pulse 5T // cas2 is 0xd6, cas3 is 0xe6 // we're also backing off write pulse width to 2T, so result is 0xee #if DIMM_CL2 - pci_write_config8(north, 0x64, 0xd4); - pci_write_config8(north, 0x65, 0xd4); - pci_write_config8(north, 0x66, 0xd4); -#else // CL=3 - pci_write_config8(north, 0x64, 0xe4); - pci_write_config8(north, 0x65, 0xe4); - pci_write_config8(north, 0x66, 0xe4); + pci_write_config8(north,0x64, 0xd4); + pci_write_config8(north,0x65, 0xd4); + pci_write_config8(north,0x66, 0xd4); +#else // CL=3 + pci_write_config8(north,0x64, 0xe4); + pci_write_config8(north,0x65, 0xe4); + pci_write_config8(north,0x66, 0xe4); #endif // dram frequency select. // enable 4K pages for 64M dram. #if DIMM_PC133 - pci_write_config8(north, 0x69, 0x3c); + pci_write_config8(north,0x69, 0x3c); #else - pci_write_config8(north, 0x69, 0xac); + pci_write_config8(north,0x69, 0xac); #endif /* IMPORTANT -- disable refresh counter */ // refresh counter, disabled. - pci_write_config8(north, 0x6A, 0x00); + pci_write_config8(north,0x6A, 0x00); + // clkenable configuration. kevinh FIXME - add precharge - pci_write_config8(north, 0x6C, 0x00); + pci_write_config8(north,0x6C, 0x00); // dram read latch delay of 1 ns, MD drive 8 mA, - // high drive strength on MA[2: 13], we#, cas#, ras# + // high drive strength on MA[2: 13], we#, cas#, ras# // As per Cindy Lee, set to 0x37, not 0x57 - pci_write_config8(north, 0x6D, 0x7f); + pci_write_config8(north,0x6D, 0x7f); } /* slot is the dram slot. Return size of side0 in lower 16-bit, * side1 in upper 16-bit, in units of 8MB */ -static unsigned long spd_module_size(unsigned char slot) -{ +static unsigned long +spd_module_size(unsigned char slot) +{ /* for all the DRAMS, see if they are there and get the size of each * module. This is just a very early first cut at sizing. */ @@ -193,24 +195,21 @@ static unsigned long spd_module_size(unsigned char slot) unsigned int value = 0; /* unsigned int module = ((0x50 + slot) << 1) + 1; */ unsigned int module = 0x50 + slot; - /* is the module there? if byte 2 is not 4, then we'll assume it * is useless. */ - print_info("Slot "); - print_info_hex8(slot); + print_info("Slot "); + print_info_hex8(slot); if (smbus_read_byte(module, 2) != 4) { print_info(" is empty\r\n"); return 0; } print_info(" is SDRAM "); - + banks = smbus_read_byte(module, 17); - /* we're going to assume symmetric banks. Sorry. */ - cols = smbus_read_byte(module, 4) & 0xf; - rows = smbus_read_byte(module, 3) & 0xf; - + cols = smbus_read_byte(module, 4) & 0xf; + rows = smbus_read_byte(module, 3) & 0xf; /* grand total. You have rows+cols addressing, * times of banks, times * width of data in bytes */ /* Width is assumed to be 64 bits == 8 bytes */ @@ -230,8 +229,10 @@ static unsigned long spd_module_size(unsigned char slot) } -static int spd_num_chips(unsigned char slot) -{ +static int +spd_num_chips(unsigned char slot) +{ +/* unsigned int module = ((0x50 + slot) << 1) + 1; */ unsigned int module = 0x50 + slot; unsigned int width; @@ -248,21 +249,20 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) unsigned char timing = 0xe4; /* read Trp */ val = smbus_read_byte(0x50, 27); - if (val < 2 * T133) + if (val < 2*T133) Trp = 1; val = smbus_read_byte(0x50, 30); - if (val < 5 * T133) + if (val < 5*T133) Tras = 0; val = smbus_read_byte(0x50, 18); if (val < 8) casl = 1; if (val < 4) casl = 0; - + val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4; - - print_debug_hex8(val); - print_debug(" is the computed timing\n"); + + print_debug_hex8(val); print_debug(" is the computed timing\n"); /* don't set it. Experience shows that this screwy chipset should just * be run with the most conservative timing. * pci_write_config8(0, 0x64, val); @@ -271,23 +271,23 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) static void set_ma_mapping(device_t north, int slot, int type) { - unsigned char reg, val; - int shift; - - reg = 0x58 + slot / 2; - if (slot % 2 >= 1) - shift = 0; - else - shift = 4; - - val = pci_read_config8(north, reg); - val &= ~(0xf << shift); - val |= type << shift; - pci_write_config8(north, reg, val); + unsigned char reg, val; + int shift; + + reg = 0x58 + slot/2; + if (slot%2 >= 1) + shift = 0; + else + shift = 4; + + val = pci_read_config8(north, reg); + val &= ~(0xf << shift); + val |= type << shift; + pci_write_config8(north, reg, val); } -static void sdram_enable(int controllers, const struct mem_controller *ctrl) +static void sdram_enable(int controllers, const struct mem_controller *ctrl) { unsigned char i; static const uint8_t ramregs[] = { @@ -295,30 +295,29 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) }; device_t north = 0; uint32_t size, base, slot, ma; - /* begin to initialize */ - + /* begin to initialize*/ // I forget why we need this, but we do dimms_write(0xa55a5aa5); - - /* set NOP */ - pci_write_config8(north, 0x6C, 0x01); + + /* set NOP*/ + pci_write_config8(north,0x6C, 0x01); print_debug("NOP\r\n"); - /* wait 200us */ + /* wait 200us*/ // You need to do the memory reference. That causes the nop cycle. dimms_read(0); udelay(400); print_debug("PRECHARGE\r\n"); /* set precharge */ - pci_write_config8(north, 0x6C, 0x02); + pci_write_config8(north,0x6C, 0x02); print_debug("DUMMY READS\r\n"); - /* dummy reads */ + /* dummy reads*/ dimms_read(0); udelay(200); print_debug("CBR\r\n"); - /* set CBR */ - pci_write_config8(north, 0x6C, 0x04); - - /* do 8 reads and wait >100us between each - from via */ + /* set CBR*/ + pci_write_config8(north,0x6C, 0x04); + + /* do 8 reads and wait >100us between each - from via*/ dimms_read(0); udelay(200); dimms_read(0); @@ -336,43 +335,43 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) dimms_read(0); udelay(200); print_debug("MRS\r\n"); - /* set MRS */ - pci_write_config8(north, 0x6c, 0x03); + /* set MRS*/ + pci_write_config8(north,0x6c, 0x03); #if DIMM_CL2 dimms_read(0x150); -#else // CL=3 +#else // CL=3 dimms_read(0x1d0); #endif udelay(200); print_debug("NORMAL\r\n"); /* set to normal mode */ - pci_write_config8(north, 0x6C, 0x08); - + pci_write_config8(north,0x6C, 0x08); + dimms_write(0x55aa55aa); dimms_read(0); udelay(200); print_debug("set ref. rate\r\n"); // Set the refresh rate. #if DIMM_PC133 - pci_write_config8(north, 0x6A, 0x86); + pci_write_config8(north,0x6A, 0x86); #else - pci_write_config8(north, 0x6A, 0x65); + pci_write_config8(north,0x6A, 0x65); #endif print_debug("enable multi-page open\r\n"); // enable multi-page open - pci_write_config8(north, 0x6B, 0x0d); - + pci_write_config8(north,0x6B, 0x0d); + base = 0; - for (slot = 0; slot < 4; slot++) { + for(slot = 0; slot < 4; slot++) { size = spd_module_size(slot); /* side 0 */ base += size & 0xffff; - pci_write_config8(north, ramregs[2 * slot], base); + pci_write_config8(north, ramregs[2*slot], base); /* side 1 */ base += size >> 16; if (base > 0xff) base = 0xff; - pci_write_config8(north, ramregs[2 * slot + 1], base); + pci_write_config8(north, ramregs[2*slot + 1], base); if (!size) continue; @@ -380,13 +379,13 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) /* Calculate the value of MA mapping type register, * based on size of SDRAM chips. */ size = (size & 0xffff) << (3 + 3); - /* convert module size to be in Mbits */ + /* convert module size to be in Mbits */ size /= spd_num_chips(slot); print_debug_hex16(size); print_debug(" is the chip size\r\n"); if (size < 64) ma = 0; - else if (size < 256) + if (size < 256) ma = 8; else ma = 0xe; -- cgit v1.2.3