From 9f3f9154c9f3dd1e3cfbd2703b681c3e9ddf4dc7 Mon Sep 17 00:00:00 2001 From: Patrick Rudolph Date: Tue, 26 Jan 2016 20:02:14 +0100 Subject: nb/intel/sandybridge/romstage: Read fuse bits for max MEM Clk Instead of hardcoding the maximum supported DDR frequency to 800Mhz (DDR3-1600), read the fuse bits that encode this information. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I515a2695a490f16aeb946bfaf3a1e860c607cba9 Signed-off-by: Patrick Rudolph Reviewed-on: https://review.coreboot.org/13487 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/northbridge/intel/sandybridge/raminit.c | 63 +++++++++++++++++++------ src/northbridge/intel/sandybridge/sandybridge.h | 3 ++ 2 files changed, 52 insertions(+), 14 deletions(-) (limited to 'src/northbridge') diff --git a/src/northbridge/intel/sandybridge/raminit.c b/src/northbridge/intel/sandybridge/raminit.c index 65282d2848..c154b23f91 100644 --- a/src/northbridge/intel/sandybridge/raminit.c +++ b/src/northbridge/intel/sandybridge/raminit.c @@ -4089,26 +4089,61 @@ void init_dram_ddr3(spd_raw_data * spds, int mobile, int min_tck, static unsigned int get_mem_min_tck(void) { + u32 reg32; + u8 rev; const struct device *dev; - const struct northbridge_intel_sandybridge_config *cfg; + const struct northbridge_intel_sandybridge_config *cfg = NULL; dev = dev_find_slot(0, HOST_BRIDGE); - if (!(dev && dev->chip_info)) - return DEFAULT_TCK; - - cfg = dev->chip_info; + if (dev) + cfg = dev->chip_info; /* If this is zero, it just means devicetree.cb didn't set it */ - if (cfg->max_mem_clock_mhz == 0) + if (!cfg || cfg->max_mem_clock_mhz == 0) { + rev = pci_read_config8(PCI_DEV(0, 0, 0), PCI_DEVICE_ID); + + if ((rev & BASE_REV_MASK) == BASE_REV_SNB) { + /* read Capabilities A Register DMFC bits */ + reg32 = pci_read_config32(PCI_DEV(0, 0, 0), CAPID0_A); + reg32 &= 0x7; + + switch (reg32) { + case 7: return TCK_533MHZ; + case 6: return TCK_666MHZ; + case 5: return TCK_800MHZ; + /* reserved: */ + default: + break; + } + } else { + /* read Capabilities B Register DMFC bits */ + reg32 = pci_read_config32(PCI_DEV(0, 0, 0), CAPID0_B); + reg32 = (reg32 >> 4) & 0x7; + + switch (reg32) { + case 7: return TCK_533MHZ; + case 6: return TCK_666MHZ; + case 5: return TCK_800MHZ; + case 4: return TCK_933MHZ; + case 3: return TCK_1066MHZ; + case 2: return TCK_1200MHZ; + case 1: return TCK_1333MHZ; + /* reserved: */ + default: + break; + } + } return DEFAULT_TCK; - - if (cfg->max_mem_clock_mhz >= 800) - return TCK_800MHZ; - else if (cfg->max_mem_clock_mhz >= 666) - return TCK_666MHZ; - else if (cfg->max_mem_clock_mhz >= 533) - return TCK_533MHZ; - return TCK_400MHZ; + } else { + if (cfg->max_mem_clock_mhz >= 800) + return TCK_800MHZ; + else if (cfg->max_mem_clock_mhz >= 666) + return TCK_666MHZ; + else if (cfg->max_mem_clock_mhz >= 533) + return TCK_533MHZ; + else + return TCK_400MHZ; + } } void perform_raminit(int s3resume) diff --git a/src/northbridge/intel/sandybridge/sandybridge.h b/src/northbridge/intel/sandybridge/sandybridge.h index 570e1f7864..ba8f8d9ae7 100644 --- a/src/northbridge/intel/sandybridge/sandybridge.h +++ b/src/northbridge/intel/sandybridge/sandybridge.h @@ -99,6 +99,9 @@ #define TSEG 0xb8 /* TSEG base */ #define TOLUD 0xbc /* Top of Low Used Memory */ +#define CAPID0_A 0xe4 /* Capabilities Register A */ +#define CAPID0_B 0xe8 /* Capabilities Register B */ + #define SKPAD 0xdc /* Scratchpad Data */ /* Device 0:1.0 PCI configuration space (PCI Express) */ -- cgit v1.2.3