From ae5e11d7cd7484343d277fb454fb19fdff34730d Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 27 Apr 2012 02:31:28 +0200 Subject: Move top level pc80 directory to drivers/ There is no reason for this to be a top level directory. Some stuff from lib/ should also be moved to drivers/ Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a Signed-off-by: Stefan Reinauer Reviewed-on: http://review.coreboot.org/939 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- src/pc80/mc146818rtc.c | 340 ------------------------------------------------- 1 file changed, 340 deletions(-) delete mode 100644 src/pc80/mc146818rtc.c (limited to 'src/pc80/mc146818rtc.c') diff --git a/src/pc80/mc146818rtc.c b/src/pc80/mc146818rtc.c deleted file mode 100644 index 99d670de42..0000000000 --- a/src/pc80/mc146818rtc.c +++ /dev/null @@ -1,340 +0,0 @@ -#include -#include -#include -#include -#include -#if CONFIG_USE_OPTION_TABLE -#include "option_table.h" -#include -#endif - -/* control registers - Moto names - */ -#define RTC_REG_A 10 -#define RTC_REG_B 11 -#define RTC_REG_C 12 -#define RTC_REG_D 13 - - -/********************************************************************** - * register details - **********************************************************************/ -#define RTC_FREQ_SELECT RTC_REG_A - -/* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus, - * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete, - * totalling to a max high interval of 2.228 ms. - */ -# define RTC_UIP 0x80 -# define RTC_DIV_CTL 0x70 - /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */ -# define RTC_REF_CLCK_4MHZ 0x00 -# define RTC_REF_CLCK_1MHZ 0x10 -# define RTC_REF_CLCK_32KHZ 0x20 - /* 2 values for divider stage reset, others for "testing purposes only" */ -# define RTC_DIV_RESET1 0x60 -# define RTC_DIV_RESET2 0x70 - /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */ -# define RTC_RATE_SELECT 0x0F -# define RTC_RATE_NONE 0x00 -# define RTC_RATE_32786HZ 0x01 -# define RTC_RATE_16384HZ 0x02 -# define RTC_RATE_8192HZ 0x03 -# define RTC_RATE_4096HZ 0x04 -# define RTC_RATE_2048HZ 0x05 -# define RTC_RATE_1024HZ 0x06 -# define RTC_RATE_512HZ 0x07 -# define RTC_RATE_256HZ 0x08 -# define RTC_RATE_128HZ 0x09 -# define RTC_RATE_64HZ 0x0a -# define RTC_RATE_32HZ 0x0b -# define RTC_RATE_16HZ 0x0c -# define RTC_RATE_8HZ 0x0d -# define RTC_RATE_4HZ 0x0e -# define RTC_RATE_2HZ 0x0f - -/**********************************************************************/ -#define RTC_CONTROL RTC_REG_B -# define RTC_SET 0x80 /* disable updates for clock setting */ -# define RTC_PIE 0x40 /* periodic interrupt enable */ -# define RTC_AIE 0x20 /* alarm interrupt enable */ -# define RTC_UIE 0x10 /* update-finished interrupt enable */ -# define RTC_SQWE 0x08 /* enable square-wave output */ -# define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ -# define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ -# define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ - -/**********************************************************************/ -#define RTC_INTR_FLAGS RTC_REG_C -/* caution - cleared by read */ -# define RTC_IRQF 0x80 /* any of the following 3 is active */ -# define RTC_PF 0x40 -# define RTC_AF 0x20 -# define RTC_UF 0x10 - -/**********************************************************************/ -#define RTC_VALID RTC_REG_D -# define RTC_VRT 0x80 /* valid RAM and time */ -/**********************************************************************/ - -#if CONFIG_USE_OPTION_TABLE -static int rtc_checksum_valid(int range_start, int range_end, int cks_loc) -{ - int i; - u16 sum, old_sum; - sum = 0; - for(i = range_start; i <= range_end; i++) { - sum += cmos_read(i); - } - old_sum = ((cmos_read(cks_loc)<<8) | cmos_read(cks_loc+1))&0x0ffff; - return sum == old_sum; -} - -static void rtc_set_checksum(int range_start, int range_end, int cks_loc) -{ - int i; - u16 sum; - sum = 0; - for(i = range_start; i <= range_end; i++) { - sum += cmos_read(i); - } - cmos_write(((sum >> 8) & 0x0ff), cks_loc); - cmos_write(((sum >> 0) & 0x0ff), cks_loc+1); -} -#endif - -#if CONFIG_ARCH_X86 -#define RTC_CONTROL_DEFAULT (RTC_24H) -#define RTC_FREQ_SELECT_DEFAULT (RTC_REF_CLCK_32KHZ | RTC_RATE_1024HZ) -#else -#if CONFIG_ARCH_ALPHA -#define RTC_CONTROL_DEFAULT (RTC_SQWE | RTC_24H) -#define RTC_FREQ_SELECT_DEFAULT (RTC_REF_CLCK_32KHZ | RTC_RATE_1024HZ) -#endif -#endif - -void rtc_init(int invalid) -{ -#if CONFIG_USE_OPTION_TABLE - unsigned char x; - int cmos_invalid, checksum_invalid; -#endif - - printk(BIOS_DEBUG, "RTC Init\n"); - -#if CONFIG_USE_OPTION_TABLE - /* See if there has been a CMOS power problem. */ - x = cmos_read(RTC_VALID); - cmos_invalid = !(x & RTC_VRT); - - /* See if there is a CMOS checksum error */ - checksum_invalid = !rtc_checksum_valid(PC_CKS_RANGE_START, - PC_CKS_RANGE_END,PC_CKS_LOC); - -#define CLEAR_CMOS 0 - if (invalid || cmos_invalid || checksum_invalid) { - printk(BIOS_WARNING, "RTC:%s%s%s%s\n", - invalid?" Clear requested":"", - cmos_invalid?" Power Problem":"", - checksum_invalid?" Checksum invalid":"", - CLEAR_CMOS?" zeroing cmos":""); -#if CLEAR_CMOS - cmos_write(0, 0x01); - cmos_write(0, 0x03); - cmos_write(0, 0x05); - for(i = 10; i < 48; i++) { - cmos_write(0, i); - } - - if (cmos_invalid) { - /* Now setup a default date of Sat 1 January 2000 */ - cmos_write(0, 0x00); /* seconds */ - cmos_write(0, 0x02); /* minutes */ - cmos_write(1, 0x04); /* hours */ - cmos_write(7, 0x06); /* day of week */ - cmos_write(1, 0x07); /* day of month */ - cmos_write(1, 0x08); /* month */ - cmos_write(0, 0x09); /* year */ - } -#endif - } -#endif - - /* Setup the real time clock */ - cmos_write(RTC_CONTROL_DEFAULT, RTC_CONTROL); - /* Setup the frequency it operates at */ - cmos_write(RTC_FREQ_SELECT_DEFAULT, RTC_FREQ_SELECT); - -#if CONFIG_USE_OPTION_TABLE - /* See if there is a LB CMOS checksum error */ - checksum_invalid = !rtc_checksum_valid(LB_CKS_RANGE_START, - LB_CKS_RANGE_END,LB_CKS_LOC); - if(checksum_invalid) - printk(BIOS_DEBUG, "RTC: coreboot checksum invalid\n"); - - /* Make certain we have a valid checksum */ - rtc_set_checksum(PC_CKS_RANGE_START, - PC_CKS_RANGE_END,PC_CKS_LOC); -#endif - - /* Clear any pending interrupts */ - (void) cmos_read(RTC_INTR_FLAGS); -} - - -#if CONFIG_USE_OPTION_TABLE -/* This routine returns the value of the requested bits - input bit = bit count from the beginning of the cmos image - length = number of bits to include in the value - ret = a character pointer to where the value is to be returned - output the value placed in ret - returns 0 = successful, -1 = an error occurred -*/ -static int get_cmos_value(unsigned long bit, unsigned long length, void *vret) -{ - unsigned char *ret; - unsigned long byte,byte_bit; - unsigned long i; - unsigned char uchar; - - /* The table is checked when it is built to ensure all - values are valid. */ - ret = vret; - byte=bit/8; /* find the byte where the data starts */ - byte_bit=bit%8; /* find the bit in the byte where the data starts */ - if(length<9) { /* one byte or less */ - uchar = cmos_read(byte); /* load the byte */ - uchar >>= byte_bit; /* shift the bits to byte align */ - /* clear unspecified bits */ - ret[0] = uchar & ((1 << length) -1); - } - else { /* more that one byte so transfer the whole bytes */ - for(i=0;length;i++,length-=8,byte++) { - /* load the byte */ - ret[i]=cmos_read(byte); - } - } - return 0; -} - -int get_option(void *dest, const char *name) -{ - struct cmos_option_table *ct; - struct cmos_entries *ce; - size_t namelen; - int found=0; - - /* Figure out how long name is */ - namelen = strnlen(name, CMOS_MAX_NAME_LENGTH); - - /* find the requested entry record */ - ct=cbfs_find_file("cmos_layout.bin", CBFS_COMPONENT_CMOS_LAYOUT); - if (!ct) { - printk(BIOS_ERR, "RTC: cmos_layout.bin could not be found. " - "Options are disabled\n"); - return(-2); - } - ce=(struct cmos_entries*)((unsigned char *)ct + ct->header_length); - for(;ce->tag==LB_TAG_OPTION; - ce=(struct cmos_entries*)((unsigned char *)ce + ce->size)) { - if (memcmp(ce->name, name, namelen) == 0) { - found=1; - break; - } - } - if(!found) { - printk(BIOS_DEBUG, "WARNING: No CMOS option '%s'.\n", name); - return(-2); - } - - if(get_cmos_value(ce->bit, ce->length, dest)) - return(-3); - if(!rtc_checksum_valid(LB_CKS_RANGE_START, - LB_CKS_RANGE_END,LB_CKS_LOC)) - return(-4); - return(0); -} - -static int set_cmos_value(unsigned long bit, unsigned long length, void *vret) -{ - unsigned char *ret; - unsigned long byte,byte_bit; - unsigned long i; - unsigned char uchar, mask; - unsigned int chksum_update_needed = 0; - - ret = vret; - byte = bit / 8; /* find the byte where the data starts */ - byte_bit = bit % 8; /* find the bit in the byte where the data starts */ - if(length <= 8) { /* one byte or less */ - mask = (1 << length) - 1; - mask <<= byte_bit; - - uchar = cmos_read(byte); - uchar &= ~mask; - uchar |= (ret[0] << byte_bit); - cmos_write(uchar, byte); - if (byte >= LB_CKS_RANGE_START && byte <= LB_CKS_RANGE_END) - chksum_update_needed = 1; - } else { /* more that one byte so transfer the whole bytes */ - if (byte_bit || length % 8) - return -1; - - for(i=0; length; i++, length-=8, byte++) - cmos_write(ret[i], byte); - if (byte >= LB_CKS_RANGE_START && byte <= LB_CKS_RANGE_END) - chksum_update_needed = 1; - } - - if (chksum_update_needed) { - rtc_set_checksum(LB_CKS_RANGE_START, - LB_CKS_RANGE_END,LB_CKS_LOC); - } - return 0; -} - - -int set_option(const char *name, void *value) -{ - struct cmos_option_table *ct; - struct cmos_entries *ce; - unsigned long length; - size_t namelen; - int found=0; - - /* Figure out how long name is */ - namelen = strnlen(name, CMOS_MAX_NAME_LENGTH); - - /* find the requested entry record */ - ct=cbfs_find_file("cmos_layout.bin", CBFS_COMPONENT_CMOS_LAYOUT); - if (!ct) { - printk(BIOS_ERR, "cmos_layout.bin could not be found. Options are disabled\n"); - return(-2); - } - ce=(struct cmos_entries*)((unsigned char *)ct + ct->header_length); - for(;ce->tag==LB_TAG_OPTION; - ce=(struct cmos_entries*)((unsigned char *)ce + ce->size)) { - if (memcmp(ce->name, name, namelen) == 0) { - found=1; - break; - } - } - if(!found) { - printk(BIOS_DEBUG, "WARNING: No CMOS option '%s'.\n", name); - return(-2); - } - - length = ce->length; - if (ce->config == 's') { - length = MAX(strlen((const char *)value) * 8, ce->length - 8); - /* make sure the string is null terminated */ - if ((set_cmos_value(ce->bit + ce->length - 8, 8, &(u8[]){0}))) - return (-3); - } - - if ((set_cmos_value(ce->bit, length, value))) - return (-3); - - return 0; -} -#endif /* CONFIG_USE_OPTION_TABLE */ -- cgit v1.2.3