From c93d4abb9986d561aa87fe5ac4643a0071c73f18 Mon Sep 17 00:00:00 2001 From: Richard Spiegel Date: Tue, 12 Feb 2019 19:17:02 -0700 Subject: soc/amd/stoneyridge: Expand 48MHz for both osc out signals There are typically two configurable oscillator outputs available on APUs or FCHs. Convert the enable function to work with either one. BUG=b:none. TEST=Build and boot grunt. Change-Id: I4b89b1e3b7963472471e34897bdd00176dbdb914 Signed-off-by: Richard Spiegel Reviewed-on: https://review.coreboot.org/c/31386 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson --- src/soc/amd/stoneyridge/southbridge.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'src/soc/amd/stoneyridge/southbridge.c') diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/southbridge.c index c8d66ac3f2..dfbd160821 100644 --- a/src/soc/amd/stoneyridge/southbridge.c +++ b/src/soc/amd/stoneyridge/southbridge.c @@ -389,20 +389,28 @@ static void sb_enable_legacy_io(void) pm_write32(PM_DECODE_EN, reg | LEGACY_IO_EN); } -void sb_clk_output_48Mhz(void) +void sb_clk_output_48Mhz(u32 osc) { u32 ctrl; u32 *misc_clk_cntl_1_ptr = (u32 *)(uintptr_t)(MISC_MMIO_BASE + MISC_CLK_CNTL1); /* - * Enable the X14M_25M_48M_OSC pin and leaving it at it's default so - * 48Mhz will be on ball AP13 (FT3b package) + * Clear the disable for OSCOUT1 (signal typically named XnnM_25M_48M) + * or OSCOUT2 (USBCLK/25M_48M_OSC). The frequency defaults to 48MHz. */ ctrl = read32(misc_clk_cntl_1_ptr); - /* clear the OSCOUT1_ClkOutputEnb to enable the 48 Mhz clock */ - ctrl &= ~OSCOUT1_CLK_OUTPUT_ENB; + switch (osc) { + case 1: + ctrl &= ~OSCOUT1_CLK_OUTPUT_ENB; + break; + case 2: + ctrl &= ~OSCOUT2_CLK_OUTPUT_ENB; + break; + default: + return; /* do nothing if invalid */ + } write32(misc_clk_cntl_1_ptr, ctrl); } -- cgit v1.2.3