From 7a39e02cfdfc1d44b3ac8d53f03e68f0fe7893d4 Mon Sep 17 00:00:00 2001 From: Richard Spiegel Date: Thu, 9 Nov 2017 10:54:04 -0700 Subject: soc/amd/stoneyridge: Fix and clean lpc.c Rename set_lpc_resource to set_child_resource. Fix EC child resource not recognized as already set. Remove code that's not needed. BUG=b:62200877 Change-Id: I6e2bf9f8214b5f660084ccd622e3fe2c0cba7656 Signed-off-by: Richard Spiegel Reviewed-on: https://review.coreboot.org/22093 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones --- src/soc/amd/stoneyridge/lpc.c | 142 ++++++++++++++++++++++++------------------ 1 file changed, 80 insertions(+), 62 deletions(-) (limited to 'src/soc/amd') diff --git a/src/soc/amd/stoneyridge/lpc.c b/src/soc/amd/stoneyridge/lpc.c index d3cb46fc27..3cd9acb7a4 100644 --- a/src/soc/amd/stoneyridge/lpc.c +++ b/src/soc/amd/stoneyridge/lpc.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2010 Advanced Micro Devices, Inc. + * Copyright (C) 2010-2017 Advanced Micro Devices, Inc. * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify @@ -158,20 +158,62 @@ static void lpc_set_resources(struct device *dev) pci_dev_set_resources(dev); } -static void set_lpc_resource(device_t child, - int *variable_num, +/* + * Structure to simplify code obtaining the total of used wide IO + * registers and the size assigned to each. Used on set_child_resource + * and lpc_enable_childrens_resources. + */ +struct _wide_IO_enable_bits { + u32 enable[3]; + u8 alt[3]; +} wio_en = { + { + LPC_WIDEIO0_ENABLE, + LPC_WIDEIO1_ENABLE, + LPC_WIDEIO2_ENABLE + }, + { + LPC_ALT_WIDEIO0_ENABLE, + LPC_ALT_WIDEIO1_ENABLE, + LPC_ALT_WIDEIO2_ENABLE + } +}; + +static void set_child_resource(device_t child, + int *wio_total_ptr, u16 *reg_var, u32 *reg, u32 *reg_x, - u16 reg_size, u8 *wiosize) { struct resource *res; u32 base, end; u32 rsize = 0, set = 0, set_x = 0; - u16 var_num; + int i, wio_total = *wio_total_ptr; + u16 reg_size[3]; + + /* + * Be a bit relaxed, tolerate that LPC region might be bigger than + * resource we try to fit, do it like this for all regions < 16 bytes. + * If there is a resource > 16 bytes it must be 512 bytes to be able + * to allocate the fresh LPC window. + * + * AGESA and early initialization can set a wide IO port. This code + * will verify if required region was previously set and will avoid + * setting a new wide IO resource if one is already set. + */ + + /* + * For each wideIO get the current size, 16, 512, + * or 0 if it isn't used. + */ + for (i = 0; i < 3; i++) { + if (i < wio_total) /* convert to index */ + reg_size[i] = (*wiosize & wio_en.alt[i]) ? 16 : 512; + else + reg_size[i] = 0; + } - var_num = *variable_num; for (res = child->resource_list; res; res = res->next) { if (!(res->flags & IORESOURCE_IO)) continue; @@ -247,37 +289,32 @@ static void set_lpc_resource(device_t child, break; default: rsize = 0; - /* try AGESA allocated region in region 0 */ - if ((var_num > 0) && ((base >= reg_var[0]) && - ((base + res->size) <= (reg_var[0] + reg_size)))) - rsize = reg_size; + if (wio_total > 0) { + for (i = 0; i < wio_total; i++) { + if ((base >= reg_var[i]) && + ((base + res->size) <= + (reg_var[i] + reg_size[i]))) { + rsize = reg_size[i]; + printk(BIOS_DEBUG, + "Covered by wideIO"); + printk(BIOS_DEBUG, " %d\n", i); + break; + } + } + } } /* check if region found and matches the enable */ if (res->size <= rsize) { *reg |= set; *reg_x |= set_x; /* check if we can fit resource in variable range */ - } else if ((var_num < 3) && - ((res->size <= 16) || (res->size == 512))) { - /* use variable ranges if pre-defined do not match */ - switch (var_num) { - case 0: - *reg_x |= LPC_WIDEIO0_ENABLE; - if (res->size <= 16) - *wiosize |= LPC_ALT_WIDEIO0_ENABLE; - break; - case 1: - *reg_x |= LPC_WIDEIO1_ENABLE; - if (res->size <= 16) - *wiosize |= LPC_ALT_WIDEIO1_ENABLE; - break; - case 2: - *reg_x |= LPC_WIDEIO2_ENABLE; - if (res->size <= 16) - *wiosize |= LPC_ALT_WIDEIO2_ENABLE; - break; - } - reg_var[var_num++] = base & 0xffff; + } else if ((wio_total < 3) && (res->size <= 512)) { + reg_var[wio_total] = base; + *reg_x |= wio_en.enable[i]; + if (res->size <= 16) + *wiosize |= wio_en.alt[wio_total]; + wio_total++; + *wio_total_ptr = wio_total; } else { printk(BIOS_ERR, "cannot fit LPC decode region:"); @@ -285,7 +322,6 @@ static void set_lpc_resource(device_t child, dev_path(child), base, end); } } - *variable_num = var_num; } /** @@ -298,38 +334,21 @@ static void lpc_enable_childrens_resources(device_t dev) { struct bus *link; u32 reg, reg_x; - int var_num = 0; + int i, wio_total = 0; u16 reg_var[3]; - u16 reg_size[1] = {512}; u8 wiosize = pci_read_config8(dev, LPC_ALT_WIDEIO_RANGE_ENABLE); - /* - * Be a bit relaxed, tolerate that LPC region might be bigger than - * resource we try to fit, do it like this for all regions < 16 bytes. - * If there is a resource > 16 bytes it must be 512 bytes to be able - * to allocate the fresh LPC window. - * - * AGESA likes to enable already one LPC region in wide port base - * 0x64-0x65, using DFLT_SIO_PME_BASE_ADDRESS, 512 bytes size - * The code tries to check if resource can fit into this region. - */ - reg = pci_read_config32(dev, LPC_IO_PORT_DECODE_ENABLE); reg_x = pci_read_config32(dev, LPC_IO_OR_MEM_DECODE_ENABLE); - /* check if ranges are free and don't use them if already taken */ - if (reg_x & LPC_WIDEIO0_ENABLE) - var_num = 1; - /* just in case check if someone did not manually set other ranges */ - if (reg_x & LPC_WIDEIO1_ENABLE) - var_num = 2; - - if (reg_x & LPC_WIDEIO2_ENABLE) - var_num = 3; - - /* check AGESA region size */ - if (wiosize & LPC_ALT_WIDEIO0_ENABLE) - reg_size[0] = 16; + /* + * Detect the number of used ranges (wide IO), and don't use those + * already taken. + */ + for (i = 0; i < 3; i++) { + if (reg_x & wio_en.enable[i]) + wio_total = i + 1; + } reg_var[2] = pci_read_config16(dev, LPC_WIDEIO2_GENERIC_PORT); reg_var[1] = pci_read_config16(dev, LPC_WIDEIO1_GENERIC_PORT); @@ -342,12 +361,11 @@ static void lpc_enable_childrens_resources(device_t dev) child = child->sibling) { if (child->enabled && (child->path.type == DEVICE_PATH_PNP)) { - set_lpc_resource(child, - &var_num, + set_child_resource(child, + &wio_total, reg_var, ®, ®_x, - reg_size[0], &wiosize); } } @@ -355,7 +373,7 @@ static void lpc_enable_childrens_resources(device_t dev) pci_write_config32(dev, LPC_IO_PORT_DECODE_ENABLE, reg); pci_write_config32(dev, LPC_IO_OR_MEM_DECODE_ENABLE, reg_x); /* Set WideIO for as many IOs found (fall through is on purpose) */ - switch (var_num) { + switch (wio_total) { case 3: pci_write_config16(dev, LPC_WIDEIO2_GENERIC_PORT, reg_var[2]); /* fall through */ -- cgit v1.2.3