From 2991f3c48f99dc2849391725b16309eb96aa41a7 Mon Sep 17 00:00:00 2001 From: Naresh G Solanki Date: Tue, 11 Jul 2017 17:01:28 +0530 Subject: soc/intel/skylake: Log wakes caused by PME on internal bus and PCIE RP Internal PME is detected when bit PME_B0_STS is set. Following devices causes internal PME. - Integrated LAN - HD Audio/Audio DSP - SATA - XHCI ('USB3') - ME Maskable Host Wake In SPT, PCIEXPWAK_STS bit isn't getting set due to known bug. So scan all PCIe RP for PME status bit & update event log accordingly. BUG=b:36992859 TEST=Build for Soraka, Verify resume due to PME on root port is logged in elog. Change-Id: I879a7c332e62ab598942b29d31bad84619b35ea7 Signed-off-by: Naresh G Solanki Reviewed-on: https://review.coreboot.org/20532 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/soc/intel/skylake/elog.c | 63 ++++++++++++++++++++++++++++++++++---------- 1 file changed, 49 insertions(+), 14 deletions(-) (limited to 'src/soc/intel/skylake') diff --git a/src/soc/intel/skylake/elog.c b/src/soc/intel/skylake/elog.c index 1178e80ff8..b2f325b6b8 100644 --- a/src/soc/intel/skylake/elog.c +++ b/src/soc/intel/skylake/elog.c @@ -200,20 +200,6 @@ static void pch_log_pme_internal_wake_source(void) static const struct pme_status_info pme_status_info[] = { { PCH_DEVFN_HDA, 0x54, ELOG_WAKE_SOURCE_PME_HDA }, { PCH_DEVFN_GBE, 0xcc, ELOG_WAKE_SOURCE_PME_GBE }, - { PCH_DEVFN_EMMC, 0x84, ELOG_WAKE_SOURCE_PME_EMMC }, - { PCH_DEVFN_SDCARD, 0x84, ELOG_WAKE_SOURCE_PME_SDCARD }, - { PCH_DEVFN_PCIE1, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE1 }, - { PCH_DEVFN_PCIE2, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE2 }, - { PCH_DEVFN_PCIE3, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE3 }, - { PCH_DEVFN_PCIE4, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE4 }, - { PCH_DEVFN_PCIE5, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE5 }, - { PCH_DEVFN_PCIE6, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE6 }, - { PCH_DEVFN_PCIE7, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE7 }, - { PCH_DEVFN_PCIE8, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE8 }, - { PCH_DEVFN_PCIE9, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE9 }, - { PCH_DEVFN_PCIE10, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE10 }, - { PCH_DEVFN_PCIE11, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE11 }, - { PCH_DEVFN_PCIE12, 0xa4, ELOG_WAKE_SOURCE_PME_PCIE12 }, { PCH_DEVFN_SATA, 0x74, ELOG_WAKE_SOURCE_PME_SATA }, { PCH_DEVFN_CSE, 0x54, ELOG_WAKE_SOURCE_PME_CSE }, { PCH_DEVFN_XHCI, 0x74, ELOG_WAKE_SOURCE_PME_XHCI }, @@ -239,6 +225,47 @@ static void pch_log_pme_internal_wake_source(void) elog_add_event_wake(ELOG_WAKE_SOURCE_PME_INTERNAL, 0); } +#define RP_PME_STS_BIT (1 << 16) +static void pch_log_rp_wake_source(void) +{ + size_t i; + device_t dev; + uint32_t val; + + static const struct pme_status_info pme_status_info[] = { + { PCH_DEVFN_PCIE1, 0x60, ELOG_WAKE_SOURCE_PME_PCIE1 }, + { PCH_DEVFN_PCIE2, 0x60, ELOG_WAKE_SOURCE_PME_PCIE2 }, + { PCH_DEVFN_PCIE3, 0x60, ELOG_WAKE_SOURCE_PME_PCIE3 }, + { PCH_DEVFN_PCIE4, 0x60, ELOG_WAKE_SOURCE_PME_PCIE4 }, + { PCH_DEVFN_PCIE5, 0x60, ELOG_WAKE_SOURCE_PME_PCIE5 }, + { PCH_DEVFN_PCIE6, 0x60, ELOG_WAKE_SOURCE_PME_PCIE6 }, + { PCH_DEVFN_PCIE7, 0x60, ELOG_WAKE_SOURCE_PME_PCIE7 }, + { PCH_DEVFN_PCIE8, 0x60, ELOG_WAKE_SOURCE_PME_PCIE8 }, + { PCH_DEVFN_PCIE9, 0x60, ELOG_WAKE_SOURCE_PME_PCIE9 }, + { PCH_DEVFN_PCIE10, 0x60, ELOG_WAKE_SOURCE_PME_PCIE10 }, + { PCH_DEVFN_PCIE11, 0x60, ELOG_WAKE_SOURCE_PME_PCIE11 }, + { PCH_DEVFN_PCIE12, 0x60, ELOG_WAKE_SOURCE_PME_PCIE12 }, + }; + + for (i = 0; i < ARRAY_SIZE(pme_status_info); i++) { + dev = dev_find_slot(0, pme_status_info[i].devfn); + + if (!dev) + continue; + + val = pci_read_config32(dev, pme_status_info[i].reg_offset); + + if ((val == 0xFFFFFFFF) || !(val & RP_PME_STS_BIT)) + continue; + + /* + * Linux kernel uses PME STS bit information. So do not clear + * this bit. + */ + pch_log_add_elog_event(&pme_status_info[i], dev); + } +} + static void pch_log_wake_source(struct chipset_power_state *ps) { /* Power Button */ @@ -253,6 +280,14 @@ static void pch_log_wake_source(struct chipset_power_state *ps) if (ps->pm1_sts & PCIEXPWAK_STS) elog_add_event_wake(ELOG_WAKE_SOURCE_PCIE, 0); + /* + * PCIE Root Port . + * This should be done when PCIEXPWAK_STS bit is set. + * In SPT, this bit isn't getting set due to known bug. + * So scan all PCIe RP for PME status bit. + */ + pch_log_rp_wake_source(); + /* PME (TODO: determine wake device) */ if (ps->gpe0_sts[GPE_STD] & PME_STS) elog_add_event_wake(ELOG_WAKE_SOURCE_PME, 0); -- cgit v1.2.3