From c82e1fbcabe54b4c19d93f4252df93a606dfb075 Mon Sep 17 00:00:00 2001 From: Pratik Prajapati Date: Fri, 1 Sep 2017 22:23:29 -0700 Subject: src/soc/intel/cannonlake: Define USB configuration params Define USB2, USB3 and Type-C configuration for CannonLake. Change-Id: I42243950366d672e886158eb1934350f47b4ff1f Signed-off-by: Pratik Prajapati Reviewed-on: https://review.coreboot.org/21339 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/soc/intel/cannonlake/include/soc/usb.h | 114 +++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+) (limited to 'src/soc/intel') diff --git a/src/soc/intel/cannonlake/include/soc/usb.h b/src/soc/intel/cannonlake/include/soc/usb.h index eac017e051..722a20251c 100644 --- a/src/soc/intel/cannonlake/include/soc/usb.h +++ b/src/soc/intel/cannonlake/include/soc/usb.h @@ -19,6 +19,25 @@ #include +/* Per Port HS Transmitter Emphasis */ +#define USB2_EMP_OFF 0 +#define USB2_DE_EMP_ON 1 +#define USB2_PRE_EMP_ON 2 +#define USB2_DE_EMP_ON_PRE_EMP_ON 3 + +/* Per Port Half Bit Pre-emphasis */ +#define USB2_FULL_BIT_PRE_EMP 0 +#define USB2_HALF_BIT_PRE_EMP 1 + +/* Per Port HS Preemphasis Bias */ +#define USB2_BIAS_0MV 0 +#define USB2_BIAS_11P25MV 1 +#define USB2_BIAS_16P9MV 2 +#define USB2_BIAS_28P15MV 3 +#define USB2_BIAS_39P35MV 5 +#define USB2_BIAS_45MV 6 +#define USB2_BIAS_56P3MV 7 + struct usb2_port_config { uint8_t enable; uint8_t ocpin; @@ -28,6 +47,87 @@ struct usb2_port_config { uint8_t pre_emp_bit; }; +/* USB Overcurrent pins definition */ +enum { + OC0 = 0, + OC1, + OC2, + OC3, + OC4, + OC5, + OC6, + OC7, + OCMAX, + OC_SKIP = 0xff, /* Skip OC programming */ +}; + +/* Standard USB Port based on length: + * - External + * - Back Panel + * - OTG + * - M.2 + * - Internal device down */ + +#define USB2_PORT_EMPTY { \ + .enable = 0, \ + .ocpin = OC_SKIP, \ + .tx_bias = USB2_BIAS_0MV, \ + .tx_emp_enable = USB2_EMP_OFF, \ + .pre_emp_bias = USB2_BIAS_0MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + +/* Length = 11.5"-12" */ +#define USB2_PORT_LONG(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_39P35MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_56P3MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + +/* Length = 6"-11.49" */ +#define USB2_PORT_MID(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_0MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_56P3MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + +/* Length = 3"-5.99" */ +#define USB2_PORT_SHORT(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_39P35MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON | USB2_DE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_39P35MV, \ + .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \ +} + +/* Max TX and Pre-emp settings */ +#define USB2_PORT_MAX(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_56P3MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_56P3MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + +/* Type-C Port, no BC1.2 charge detect module / MUX + * Length = 3.0" - 9.00" */ +#define USB2_PORT_TYPE_C(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_0MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_56P3MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + struct usb3_port_config { uint8_t enable; uint8_t ocpin; @@ -35,4 +135,18 @@ struct usb3_port_config { uint8_t tx_downscale_amp; }; +#define USB3_PORT_EMPTY { \ + .enable = 0, \ + .ocpin = OC_SKIP, \ + .tx_de_emp = 0x00, \ + .tx_downscale_amp = 0x00, \ +} + +#define USB3_PORT_DEFAULT(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_de_emp = 0x0, \ + .tx_downscale_amp = 0x00, \ +} + #endif -- cgit v1.2.3