From 40a3e321d4e8f2877de1700db67b8c7f7ea89820 Mon Sep 17 00:00:00 2001 From: Patrick Georgi Date: Mon, 22 Jun 2015 19:41:29 +0200 Subject: nvidia/tegra210: add new SoC This includes Chrome OS downstream up to Change-Id: Ic89ed54c. Change-Id: I81853434600390d643160fe57554495b2bfe60ab Signed-off-by: Patrick Georgi Reviewed-on: http://review.coreboot.org/10633 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/soc/nvidia/tegra210/spi.c | 960 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 960 insertions(+) create mode 100644 src/soc/nvidia/tegra210/spi.c (limited to 'src/soc/nvidia/tegra210/spi.c') diff --git a/src/soc/nvidia/tegra210/spi.c b/src/soc/nvidia/tegra210/spi.c new file mode 100644 index 0000000000..ffb4d47c70 --- /dev/null +++ b/src/soc/nvidia/tegra210/spi.c @@ -0,0 +1,960 @@ +/* + * NVIDIA Tegra SPI controller (T114 and later) + * + * Copyright (c) 2010-2013 NVIDIA Corporation + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#if defined(CONFIG_DEBUG_SPI) && CONFIG_DEBUG_SPI +# define DEBUG_SPI(x,...) printk(BIOS_DEBUG, "TEGRA_SPI: " x) +#else +# define DEBUG_SPI(x,...) +#endif + +/* + * 64 packets in FIFO mode, BLOCK_SIZE packets in DMA mode. Packets can vary + * in size from 4 to 32 bits. To keep things simple we'll use 8-bit packets. + */ +#define SPI_PACKET_SIZE_BYTES 1 +#define SPI_MAX_TRANSFER_BYTES_FIFO (64 * SPI_PACKET_SIZE_BYTES) +#define SPI_MAX_TRANSFER_BYTES_DMA (65535 * SPI_PACKET_SIZE_BYTES) + +/* + * This is used to workaround an issue seen where it may take some time for + * packets to show up in the FIFO after they have been received and the + * BLOCK_COUNT has been incremented. + */ +#define SPI_FIFO_XFER_TIMEOUT_US 1000 + +/* COMMAND1 */ +#define SPI_CMD1_GO (1 << 31) +#define SPI_CMD1_M_S (1 << 30) +#define SPI_CMD1_MODE_MASK 0x3 +#define SPI_CMD1_MODE_SHIFT 28 +#define SPI_CMD1_CS_SEL_MASK 0x3 +#define SPI_CMD1_CS_SEL_SHIFT 26 +#define SPI_CMD1_CS_POL_INACTIVE3 (1 << 25) +#define SPI_CMD1_CS_POL_INACTIVE2 (1 << 24) +#define SPI_CMD1_CS_POL_INACTIVE1 (1 << 23) +#define SPI_CMD1_CS_POL_INACTIVE0 (1 << 22) +#define SPI_CMD1_CS_SW_HW (1 << 21) +#define SPI_CMD1_CS_SW_VAL (1 << 20) +#define SPI_CMD1_IDLE_SDA_MASK 0x3 +#define SPI_CMD1_IDLE_SDA_SHIFT 18 +#define SPI_CMD1_BIDIR (1 << 17) +#define SPI_CMD1_LSBI_FE (1 << 16) +#define SPI_CMD1_LSBY_FE (1 << 15) +#define SPI_CMD1_BOTH_EN_BIT (1 << 14) +#define SPI_CMD1_BOTH_EN_BYTE (1 << 13) +#define SPI_CMD1_RX_EN (1 << 12) +#define SPI_CMD1_TX_EN (1 << 11) +#define SPI_CMD1_PACKED (1 << 5) +#define SPI_CMD1_BIT_LEN_MASK 0x1f +#define SPI_CMD1_BIT_LEN_SHIFT 0 + +/* COMMAND2 */ +#define SPI_CMD2_TX_CLK_TAP_DELAY (1 << 6) +#define SPI_CMD2_TX_CLK_TAP_DELAY_MASK (0x3F << 6) +#define SPI_CMD2_RX_CLK_TAP_DELAY (1 << 0) +#define SPI_CMD2_RX_CLK_TAP_DELAY_MASK (0x3F << 0) + +/* SPI_TRANS_STATUS */ +#define SPI_STATUS_RDY (1 << 30) +#define SPI_STATUS_SLV_IDLE_COUNT_MASK 0xff +#define SPI_STATUS_SLV_IDLE_COUNT_SHIFT 16 +#define SPI_STATUS_BLOCK_COUNT 0xffff +#define SPI_STATUS_BLOCK_COUNT_SHIFT 0 + +/* SPI_FIFO_STATUS */ +#define SPI_FIFO_STATUS_CS_INACTIVE (1 << 31) +#define SPI_FIFO_STATUS_FRAME_END (1 << 30) +#define SPI_FIFO_STATUS_RX_FIFO_FULL_COUNT_MASK 0x7f +#define SPI_FIFO_STATUS_RX_FIFO_FULL_COUNT_SHIFT 23 +#define SPI_FIFO_STATUS_TX_FIFO_EMPTY_COUNT_MASK 0x7f +#define SPI_FIFO_STATUS_TX_FIFO_EMPTY_COUNT_SHIFT 16 +#define SPI_FIFO_STATUS_RX_FIFO_FLUSH (1 << 15) +#define SPI_FIFO_STATUS_TX_FIFO_FLUSH (1 << 14) +#define SPI_FIFO_STATUS_ERR (1 << 8) +#define SPI_FIFO_STATUS_TX_FIFO_OVF (1 << 7) +#define SPI_FIFO_STATUS_TX_FIFO_UNR (1 << 6) +#define SPI_FIFO_STATUS_RX_FIFO_OVF (1 << 5) +#define SPI_FIFO_STATUS_RX_FIFO_UNR (1 << 4) +#define SPI_FIFO_STATUS_TX_FIFO_FULL (1 << 3) +#define SPI_FIFO_STATUS_TX_FIFO_EMPTY (1 << 2) +#define SPI_FIFO_STATUS_RX_FIFO_FULL (1 << 1) +#define SPI_FIFO_STATUS_RX_FIFO_EMPTY (1 << 0) + +/* SPI_DMA_CTL */ +#define SPI_DMA_CTL_DMA (1 << 31) +#define SPI_DMA_CTL_CONT (1 << 30) +#define SPI_DMA_CTL_IE_RX (1 << 29) +#define SPI_DMA_CTL_IE_TX (1 << 28) +#define SPI_DMA_CTL_RX_TRIG_MASK 0x3 +#define SPI_DMA_CTL_RX_TRIG_SHIFT 19 +#define SPI_DMA_CTL_TX_TRIG_MASK 0x3 +#define SPI_DMA_CTL_TX_TRIG_SHIFT 15 + +/* SPI_DMA_BLK */ +#define SPI_DMA_CTL_BLOCK_SIZE_MASK 0xffff +#define SPI_DMA_CTL_BLOCK_SIZE_SHIFT 0 + +static struct tegra_spi_channel tegra_spi_channels[] = { + /* + * Note: Tegra pinmux must be setup for corresponding SPI channel in + * order for its registers to be accessible. If pinmux has not been + * set up, access to the channel's registers will simply hang. + * + * TODO(dhendrix): Clarify or remove this comment (is clock setup + * necessary first, or just pinmux, or both?) + */ + { + .slave = { .bus = 1, }, + .regs = (struct tegra_spi_regs *)TEGRA_SPI1_BASE, + .req_sel = APBDMA_SLAVE_SL2B1, + }, + { + .slave = { .bus = 2, }, + .regs = (struct tegra_spi_regs *)TEGRA_SPI2_BASE, + .req_sel = APBDMA_SLAVE_SL2B2, + }, + { + .slave = { .bus = 3, }, + .regs = (struct tegra_spi_regs *)TEGRA_SPI3_BASE, + .req_sel = APBDMA_SLAVE_SL2B3, + }, + { + .slave = { .bus = 4, }, + .regs = (struct tegra_spi_regs *)TEGRA_SPI4_BASE, + .req_sel = APBDMA_SLAVE_SL2B4, + }, + { + .slave = { .bus = 5, }, + .regs = (struct tegra_spi_regs *)TEGRA_SPI5_BASE, + .req_sel = APBDMA_SLAVE_SL2B5, + }, + { + .slave = { .bus = 6, }, + .regs = (struct tegra_spi_regs *)TEGRA_SPI6_BASE, + .req_sel = APBDMA_SLAVE_SL2B6, + }, + { + .slave = { .bus = 7, }, + .regs = (struct tegra_spi_regs *)TEGRA_QSPI_BASE, + .req_sel = APBDMA_SLAVE_QSPI, + }, +}; + +enum spi_direction { + SPI_SEND, + SPI_RECEIVE, +}; + +struct tegra_spi_channel *tegra_spi_init(unsigned int bus) +{ + int i; + struct tegra_spi_channel *spi = NULL; + + for (i = 0; i < ARRAY_SIZE(tegra_spi_channels); i++) { + if (tegra_spi_channels[i].slave.bus == bus) { + spi = &tegra_spi_channels[i]; + break; + } + } + if (!spi) + return NULL; + + /* software drives chip-select, set value to high */ + setbits_le32(&spi->regs->command1, + SPI_CMD1_CS_SW_HW | SPI_CMD1_CS_SW_VAL); + + /* 8-bit transfers, unpacked mode, most significant bit first */ + clrbits_le32(&spi->regs->command1, + SPI_CMD1_BIT_LEN_MASK | SPI_CMD1_PACKED); + setbits_le32(&spi->regs->command1, 7 << SPI_CMD1_BIT_LEN_SHIFT); + + return spi; +} + +static struct tegra_spi_channel * const to_tegra_spi(int bus) { + return &tegra_spi_channels[bus - 1]; +} + +static unsigned int tegra_spi_speed(unsigned int bus) +{ + /* FIXME: implement this properly, for now use max value (50MHz) */ + return 50000000; +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct tegra_spi_regs *regs = to_tegra_spi(slave->bus)->regs; + u32 val; + + tegra_spi_init(slave->bus); + + val = read32(®s->command1); + + /* select appropriate chip-select line */ + val &= ~(SPI_CMD1_CS_SEL_MASK << SPI_CMD1_CS_SEL_SHIFT); + val |= (slave->cs << SPI_CMD1_CS_SEL_SHIFT); + + /* drive chip-select with the inverse of the "inactive" value */ + if (val & (SPI_CMD1_CS_POL_INACTIVE0 << slave->cs)) + val &= ~SPI_CMD1_CS_SW_VAL; + else + val |= SPI_CMD1_CS_SW_VAL; + + write32(®s->command1, val); + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct tegra_spi_regs *regs = to_tegra_spi(slave->bus)->regs; + u32 val; + + val = read32(®s->command1); + + if (val & (SPI_CMD1_CS_POL_INACTIVE0 << slave->cs)) + val |= SPI_CMD1_CS_SW_VAL; + else + val &= ~SPI_CMD1_CS_SW_VAL; + + write32(®s->command1, val); +} + +static void dump_fifo_status(struct tegra_spi_channel *spi) +{ + u32 status = read32(&spi->regs->fifo_status); + + printk(BIOS_INFO, "Raw FIFO status: 0x%08x\n", status); + if (status & SPI_FIFO_STATUS_TX_FIFO_OVF) + printk(BIOS_INFO, "\tTx overflow detected\n"); + if (status & SPI_FIFO_STATUS_TX_FIFO_UNR) + printk(BIOS_INFO, "\tTx underrun detected\n"); + if (status & SPI_FIFO_STATUS_RX_FIFO_OVF) + printk(BIOS_INFO, "\tRx overflow detected\n"); + if (status & SPI_FIFO_STATUS_RX_FIFO_UNR) + printk(BIOS_INFO, "\tRx underrun detected\n"); + + printk(BIOS_INFO, "TX_FIFO: 0x%08x, TX_DATA: 0x%08x\n", + read32(&spi->regs->tx_fifo), read32(&spi->regs->tx_data)); + printk(BIOS_INFO, "RX_FIFO: 0x%08x, RX_DATA: 0x%08x\n", + read32(&spi->regs->rx_fifo), read32(&spi->regs->rx_data)); +} + +static void clear_fifo_status(struct tegra_spi_channel *spi) +{ + clrbits_le32(&spi->regs->fifo_status, + SPI_FIFO_STATUS_ERR | + SPI_FIFO_STATUS_TX_FIFO_OVF | + SPI_FIFO_STATUS_TX_FIFO_UNR | + SPI_FIFO_STATUS_RX_FIFO_OVF | + SPI_FIFO_STATUS_RX_FIFO_UNR); +} + +static void dump_spi_regs(struct tegra_spi_channel *spi) +{ + printk(BIOS_INFO, "SPI regs:\n" + "\tdma_blk: 0x%08x\n" + "\tcommand1: 0x%08x\n" + "\tdma_ctl: 0x%08x\n" + "\ttrans_status: 0x%08x\n", + read32(&spi->regs->dma_blk), + read32(&spi->regs->command1), + read32(&spi->regs->dma_ctl), + read32(&spi->regs->trans_status)); +} + +static void dump_dma_regs(struct apb_dma_channel *dma) +{ + printk(BIOS_INFO, "DMA regs:\n" + "\tahb_ptr: 0x%08x\n" + "\tapb_ptr: 0x%08x\n" + "\tahb_seq: 0x%08x\n" + "\tapb_seq: 0x%08x\n" + "\tcsr: 0x%08x\n" + "\tcsre: 0x%08x\n" + "\twcount: 0x%08x\n" + "\tdma_byte_sta: 0x%08x\n" + "\tword_transfer: 0x%08x\n", + read32(&dma->regs->ahb_ptr), + read32(&dma->regs->apb_ptr), + read32(&dma->regs->ahb_seq), + read32(&dma->regs->apb_seq), + read32(&dma->regs->csr), + read32(&dma->regs->csre), + read32(&dma->regs->wcount), + read32(&dma->regs->dma_byte_sta), + read32(&dma->regs->word_transfer)); +} + +static inline unsigned int spi_byte_count(struct tegra_spi_channel *spi) +{ + /* FIXME: Make this take total packet size into account */ + return read32(&spi->regs->trans_status) & + (SPI_STATUS_BLOCK_COUNT << SPI_STATUS_BLOCK_COUNT_SHIFT); +} + +/* + * This calls udelay() with a calculated value based on the SPI speed and + * number of bytes remaining to be transferred. It assumes that if the + * calculated delay period is less than MIN_DELAY_US then it is probably + * not worth the overhead of yielding. + */ +#define MIN_DELAY_US 250 +static void spi_delay(struct tegra_spi_channel *spi, + unsigned int bytes_remaining) +{ + unsigned int ns_per_byte, delay_us; + + ns_per_byte = 1000000000 / (tegra_spi_speed(spi->slave.bus) / 8); + delay_us = (ns_per_byte * bytes_remaining) / 1000; + + if (delay_us < MIN_DELAY_US) + return; + + udelay(delay_us); +} + +static void tegra_spi_wait(struct tegra_spi_channel *spi) +{ + unsigned int count, dma_blk; + + dma_blk = 1 + (read32(&spi->regs->dma_blk) & + (SPI_DMA_CTL_BLOCK_SIZE_MASK << SPI_DMA_CTL_BLOCK_SIZE_SHIFT)); + + while ((count = spi_byte_count(spi)) != dma_blk) + spi_delay(spi, dma_blk - count); +} + + +static int fifo_error(struct tegra_spi_channel *spi) +{ + return read32(&spi->regs->fifo_status) & SPI_FIFO_STATUS_ERR ? 1 : 0; +} + +static int tegra_spi_pio_prepare(struct tegra_spi_channel *spi, + unsigned int bytes, enum spi_direction dir) +{ + u8 *p = spi->out_buf; + unsigned int todo = MIN(bytes, SPI_MAX_TRANSFER_BYTES_FIFO); + u32 flush_mask, enable_mask; + + if (dir == SPI_SEND) { + flush_mask = SPI_FIFO_STATUS_TX_FIFO_FLUSH; + enable_mask = SPI_CMD1_TX_EN; + } else { + flush_mask = SPI_FIFO_STATUS_RX_FIFO_FLUSH; + enable_mask = SPI_CMD1_RX_EN; + } + + setbits_le32(&spi->regs->fifo_status, flush_mask); + while (read32(&spi->regs->fifo_status) & flush_mask) + ; + + /* + * BLOCK_SIZE in SPI_DMA_BLK register applies to both DMA and + * PIO transfers. And, it should be programmed before RX_EN or + * TX_EN is set. + */ + write32(&spi->regs->dma_blk, todo - 1); + + setbits_le32(&spi->regs->command1, enable_mask); + + if (dir == SPI_SEND) { + unsigned int to_fifo = bytes; + while (to_fifo) { + write32(&spi->regs->tx_fifo, *p); + p++; + to_fifo--; + } + } + + return todo; +} + +static void tegra_spi_pio_start(struct tegra_spi_channel *spi) +{ + setbits_le32(&spi->regs->trans_status, SPI_STATUS_RDY); + /* + * Need to stabilize other reg bit before GO bit set. + * + * From IAS: + * For successful operation at various freq combinations, min of 4-5 + * spi_clk cycle delay might be required before enabling PIO or DMA bit. + * This is needed to overcome the MCP between core and pad_macro. + * The worst case delay calculation can be done considering slowest + * qspi_clk as 1 MHz. based on that 1 us delay should be enough before + * enabling pio or dma. + */ + udelay(2); + setbits_le32(&spi->regs->command1, SPI_CMD1_GO); + /* Need to wait a few cycles before command1 register is read */ + udelay(1); + /* Make sure the write to command1 completes. */ + read32(&spi->regs->command1); +} + +static inline u32 rx_fifo_count(struct tegra_spi_channel *spi) +{ + return (read32(&spi->regs->fifo_status) >> + SPI_FIFO_STATUS_RX_FIFO_FULL_COUNT_SHIFT) & + SPI_FIFO_STATUS_RX_FIFO_FULL_COUNT_MASK; +} + +static int tegra_spi_pio_finish(struct tegra_spi_channel *spi) +{ + u8 *p = spi->in_buf; + struct stopwatch sw; + + clrbits_le32(&spi->regs->command1, SPI_CMD1_RX_EN | SPI_CMD1_TX_EN); + + /* + * Allow some time in case the Rx FIFO does not yet have + * all packets pushed into it. See chrome-os-partner:24215. + */ + stopwatch_init_usecs_expire(&sw, SPI_FIFO_XFER_TIMEOUT_US); + do { + if (rx_fifo_count(spi) == spi_byte_count(spi)) + break; + } while (!stopwatch_expired(&sw)); + + while (!(read32(&spi->regs->fifo_status) & + SPI_FIFO_STATUS_RX_FIFO_EMPTY)) { + *p = read8(&spi->regs->rx_fifo); + p++; + } + + if (fifo_error(spi)) { + printk(BIOS_ERR, "%s: ERROR:\n", __func__); + dump_spi_regs(spi); + dump_fifo_status(spi); + return -1; + } + + return 0; +} + +static void setup_dma_params(struct tegra_spi_channel *spi, + struct apb_dma_channel *dma) +{ + /* APB bus width = 8-bits, address wrap for each word */ + clrbits_le32(&dma->regs->apb_seq, + APB_BUS_WIDTH_MASK << APB_BUS_WIDTH_SHIFT); + /* AHB 1 word burst, bus width = 32 bits (fixed in hardware), + * no address wrapping */ + clrsetbits_le32(&dma->regs->ahb_seq, + (AHB_BURST_MASK << AHB_BURST_SHIFT), + 4 << AHB_BURST_SHIFT); + + /* Set ONCE mode to transfer one "block" at a time (64KB) and enable + * flow control. */ + clrbits_le32(&dma->regs->csr, + APB_CSR_REQ_SEL_MASK << APB_CSR_REQ_SEL_SHIFT); + setbits_le32(&dma->regs->csr, APB_CSR_ONCE | APB_CSR_FLOW | + (spi->req_sel << APB_CSR_REQ_SEL_SHIFT)); +} + +static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi, + unsigned int bytes, enum spi_direction dir) +{ + unsigned int todo, wcount; + + /* + * For DMA we need to think of things in terms of word count. + * AHB width is fixed at 32-bits. To avoid overrunning + * the in/out buffers we must align down. (Note: lowest 2-bits + * in WCOUNT register are ignored, and WCOUNT seems to count + * words starting at n-1) + * + * Example: If "bytes" is 7 and we are transferring 1-byte at a time, + * WCOUNT should be 4. The remaining 3 bytes must be transferred + * using PIO. + */ + todo = MIN(bytes, SPI_MAX_TRANSFER_BYTES_DMA - TEGRA_DMA_ALIGN_BYTES); + todo = ALIGN_DOWN(todo, TEGRA_DMA_ALIGN_BYTES); + wcount = ALIGN_DOWN(todo - TEGRA_DMA_ALIGN_BYTES, TEGRA_DMA_ALIGN_BYTES); + + if (dir == SPI_SEND) { + spi->dma_out = dma_claim(); + if (!spi->dma_out) + return -1; + + /* ensure bytes to send will be visible to DMA controller */ + dcache_clean_by_mva(spi->out_buf, bytes); + + write32(&spi->dma_out->regs->apb_ptr, + (uintptr_t) & spi->regs->tx_fifo); + write32(&spi->dma_out->regs->ahb_ptr, (uintptr_t)spi->out_buf); + setbits_le32(&spi->dma_out->regs->csr, APB_CSR_DIR); + setup_dma_params(spi, spi->dma_out); + write32(&spi->dma_out->regs->wcount, wcount); + } else { + spi->dma_in = dma_claim(); + if (!spi->dma_in) + return -1; + + /* avoid data collisions */ + dcache_clean_invalidate_by_mva(spi->in_buf, bytes); + + write32(&spi->dma_in->regs->apb_ptr, + (uintptr_t)&spi->regs->rx_fifo); + write32(&spi->dma_in->regs->ahb_ptr, (uintptr_t)spi->in_buf); + clrbits_le32(&spi->dma_in->regs->csr, APB_CSR_DIR); + setup_dma_params(spi, spi->dma_in); + write32(&spi->dma_in->regs->wcount, wcount); + } + + /* BLOCK_SIZE starts at n-1 */ + write32(&spi->regs->dma_blk, todo - 1); + return todo; +} + +static void tegra_spi_dma_start(struct tegra_spi_channel *spi) +{ + /* + * The RDY bit in SPI_TRANS_STATUS needs to be cleared manually + * (set bit to clear) between each transaction. Otherwise the next + * transaction does not start. + */ + setbits_le32(&spi->regs->trans_status, SPI_STATUS_RDY); + + struct apb_dma * const apb_dma = (struct apb_dma *)TEGRA_APB_DMA_BASE; + + /* + * The DMA triggers have units of packets. As each packet is currently + * 1 byte the triggers need to be set to 4 packets (0b01) to match + * the AHB 32-bit (4 byte) tranfser. Otherwise the FIFO errors can + * occur. + */ + if (spi->dma_out) { + /* Enable secure access for the channel. */ + setbits_le32(&apb_dma->security_reg, + SECURITY_EN_BIT(spi->dma_out->num)); + clrsetbits_le32(&spi->regs->dma_ctl, + SPI_DMA_CTL_TX_TRIG_MASK << SPI_DMA_CTL_TX_TRIG_SHIFT, + 1 << SPI_DMA_CTL_TX_TRIG_SHIFT); + setbits_le32(&spi->regs->command1, SPI_CMD1_TX_EN); + } + if (spi->dma_in) { + /* Enable secure access for the channel. */ + setbits_le32(&apb_dma->security_reg, + SECURITY_EN_BIT(spi->dma_in->num)); + clrsetbits_le32(&spi->regs->dma_ctl, + SPI_DMA_CTL_RX_TRIG_MASK << SPI_DMA_CTL_RX_TRIG_SHIFT, + 1 << SPI_DMA_CTL_RX_TRIG_SHIFT); + setbits_le32(&spi->regs->command1, SPI_CMD1_RX_EN); + } + + /* + * To avoid underrun conditions, enable APB DMA before SPI DMA for + * Tx and enable SPI DMA before APB DMA before Rx. + */ + if (spi->dma_out) + dma_start(spi->dma_out); + setbits_le32(&spi->regs->dma_ctl, SPI_DMA_CTL_DMA); + if (spi->dma_in) + dma_start(spi->dma_in); + + +} + +static int tegra_spi_dma_finish(struct tegra_spi_channel *spi) +{ + int ret; + unsigned int todo; + + struct apb_dma * const apb_dma = (struct apb_dma *)TEGRA_APB_DMA_BASE; + + todo = read32(&spi->dma_in->regs->wcount); + + if (spi->dma_in) { + while ((read32(&spi->dma_in->regs->dma_byte_sta) < todo) || + dma_busy(spi->dma_in)) + ; /* this shouldn't take long, no udelay */ + dma_stop(spi->dma_in); + clrbits_le32(&spi->regs->command1, SPI_CMD1_RX_EN); + /* Disable secure access for the channel. */ + clrbits_le32(&apb_dma->security_reg, + SECURITY_EN_BIT(spi->dma_in->num)); + dma_release(spi->dma_in); + } + + if (spi->dma_out) { + while ((read32(&spi->dma_out->regs->dma_byte_sta) < todo) || + dma_busy(spi->dma_out)) + spi_delay(spi, todo - spi_byte_count(spi)); + clrbits_le32(&spi->regs->command1, SPI_CMD1_TX_EN); + dma_stop(spi->dma_out); + /* Disable secure access for the channel. */ + clrbits_le32(&apb_dma->security_reg, + SECURITY_EN_BIT(spi->dma_out->num)); + dma_release(spi->dma_out); + } + + if (fifo_error(spi)) { + printk(BIOS_ERR, "%s: ERROR:\n", __func__); + dump_dma_regs(spi->dma_out); + dump_dma_regs(spi->dma_in); + dump_spi_regs(spi); + dump_fifo_status(spi); + ret = -1; + goto done; + } + + ret = 0; +done: + spi->dma_in = NULL; + spi->dma_out = NULL; + return ret; +} + +/* + * xfer_setup() prepares a transfer. It does sanity checking, alignment, and + * sets transfer mode used by this channel (if not set already). + * + * A few caveats to watch out for: + * - The number of bytes which can be transferred may be smaller than the + * number of bytes the caller specifies. The number of bytes ready for + * a transfer will be returned (unless an error occurs). + * + * - Only one mode can be used for both RX and TX. The transfer mode of the + * SPI channel (spi->xfer_mode) is checked each time this function is called. + * If conflicting modes are detected, spi->xfer_mode will be set to + * XFER_MODE_NONE and an error will be returned. + * + * Returns bytes ready for transfer if successful, <0 to indicate error. + */ +static int xfer_setup(struct tegra_spi_channel *spi, void *buf, + unsigned int bytes, enum spi_direction dir) +{ + unsigned int line_size = dcache_line_bytes(); + unsigned int align; + int ret = -1; + + if (!bytes) + return 0; + + if (dir == SPI_SEND) + spi->out_buf = buf; + else if (dir == SPI_RECEIVE) + spi->in_buf = buf; + + /* + * Alignment consideratons: + * When we enable caching we'll need to clean/invalidate portions of + * memory. So we need to be careful about memory alignment. Also, DMA + * likes to operate on 4-bytes at a time on the AHB side. So for + * example, if we only want to receive 1 byte, 4 bytes will be be + * written in memory even if those extra 3 bytes are beyond the length + * we want. + * + * For now we'll use PIO to send/receive unaligned bytes. We may + * consider setting aside some space for a kind of bounce buffer to + * stay in DMA mode once we have a chance to benchmark the two + * approaches. + */ + + if (bytes < line_size) { + if (spi->xfer_mode == XFER_MODE_DMA) { + spi->xfer_mode = XFER_MODE_NONE; + ret = -1; + } else { + spi->xfer_mode = XFER_MODE_PIO; + ret = tegra_spi_pio_prepare(spi, bytes, dir); + } + goto done; + } + + /* transfer bytes before the aligned boundary */ + align = line_size - ((uintptr_t)buf % line_size); + if ((align != 0) && (align != line_size)) { + if (spi->xfer_mode == XFER_MODE_DMA) { + spi->xfer_mode = XFER_MODE_NONE; + ret = -1; + } else { + spi->xfer_mode = XFER_MODE_PIO; + ret = tegra_spi_pio_prepare(spi, align, dir); + } + goto done; + } + + /* do aligned DMA transfer */ + align = (((uintptr_t)buf + bytes) % line_size); + if (bytes - align > 0) { + unsigned int dma_bytes = bytes - align; + + if (spi->xfer_mode == XFER_MODE_PIO) { + spi->xfer_mode = XFER_MODE_NONE; + ret = -1; + } else { + spi->xfer_mode = XFER_MODE_DMA; + ret = tegra_spi_dma_prepare(spi, dma_bytes, dir); + } + + goto done; + } + + /* transfer any remaining unaligned bytes */ + if (align) { + if (spi->xfer_mode == XFER_MODE_DMA) { + spi->xfer_mode = XFER_MODE_NONE; + ret = -1; + } else { + spi->xfer_mode = XFER_MODE_PIO; + ret = tegra_spi_pio_prepare(spi, align, dir); + } + goto done; + } + +done: + return ret; +} + +static void xfer_start(struct tegra_spi_channel *spi) +{ + if (spi->xfer_mode == XFER_MODE_DMA) + tegra_spi_dma_start(spi); + else + tegra_spi_pio_start(spi); +} + +static void xfer_wait(struct tegra_spi_channel *spi) +{ + tegra_spi_wait(spi); +} + +static int xfer_finish(struct tegra_spi_channel *spi) +{ + int ret; + + if (spi->xfer_mode == XFER_MODE_DMA) + ret = tegra_spi_dma_finish(spi); + else + ret = tegra_spi_pio_finish(spi); + + spi->xfer_mode = XFER_MODE_NONE; + return ret; +} + +unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len) +{ + return buf_len; +} + +int spi_xfer(struct spi_slave *slave, const void *dout, + unsigned int out_bytes, void *din, unsigned int in_bytes) +{ + struct tegra_spi_channel *spi = to_tegra_spi(slave->bus); + u8 *out_buf = (u8 *)dout; + u8 *in_buf = (u8 *)din; + unsigned int todo; + int ret = 0; + + /* tegra bus numbers start at 1 */ + ASSERT(slave->bus >= 1 && slave->bus <= ARRAY_SIZE(tegra_spi_channels)); + + while (out_bytes || in_bytes) { + int x = 0; + + if (out_bytes == 0) + todo = in_bytes; + else if (in_bytes == 0) + todo = out_bytes; + else + todo = MIN(out_bytes, in_bytes); + + if (out_bytes) { + x = xfer_setup(spi, out_buf, todo, SPI_SEND); + if (x < 0) { + if (spi->xfer_mode == XFER_MODE_NONE) { + spi->xfer_mode = XFER_MODE_PIO; + continue; + } else { + ret = -1; + break; + } + } + } + if (in_bytes) { + x = xfer_setup(spi, in_buf, todo, SPI_RECEIVE); + if (x < 0) { + if (spi->xfer_mode == XFER_MODE_NONE) { + spi->xfer_mode = XFER_MODE_PIO; + continue; + } else { + ret = -1; + break; + } + } + } + + /* + * Note: Some devices (such as Chrome EC) are sensitive to + * delays, so be careful when adding debug prints not to + * cause timeouts between transfers. + */ + xfer_start(spi); + xfer_wait(spi); + if (xfer_finish(spi)) { + ret = -1; + break; + } + + /* Post-processing. */ + if (out_bytes) { + out_bytes -= x; + out_buf += x; + } + if (in_bytes) { + in_bytes -= x; + in_buf += x; + } + } + + if (ret < 0) { + printk(BIOS_ERR, "%s: Error detected\n", __func__); + printk(BIOS_ERR, "Transaction size: %u, bytes remaining: " + "%u out / %u in\n", todo, out_bytes, in_bytes); + clear_fifo_status(spi); + } + return ret; +} + +#define JEDEC_READ 0x03 +#define JEDEC_READ_OUTSIZE 0x04 +#define JEDEC_FAST_READ_DUAL 0x3b +#define JEDEC_FAST_READ_DUAL_OUTSIZE 0x05 + +static struct spi_slave *boot_slave; + +static ssize_t tegra_spi_readat(const struct region_device *rdev, void *dest, + size_t offset, size_t count) +{ + u8 spi_read_cmd[JEDEC_FAST_READ_DUAL_OUTSIZE]; + unsigned int read_cmd_bytes; + int ret = count; + struct tegra_spi_channel *channel; + + channel = to_tegra_spi(boot_slave->bus); + + if (channel->dual_mode) { + /* + * Command 0x3b will interleave data only, command 0xbb will + * interleave the address as well. It's nice to see the address + * plainly when debugging, and we're mostly concerned with + * large transfers so the optimization of using 0xbb isn't + * really worthwhile. + */ + spi_read_cmd[0] = JEDEC_FAST_READ_DUAL; + spi_read_cmd[4] = 0x00; /* dummy byte */ + read_cmd_bytes = JEDEC_FAST_READ_DUAL_OUTSIZE; + } else { + spi_read_cmd[0] = JEDEC_READ; + read_cmd_bytes = JEDEC_READ_OUTSIZE; + } + spi_read_cmd[1] = (offset >> 16) & 0xff; + spi_read_cmd[2] = (offset >> 8) & 0xff; + spi_read_cmd[3] = offset & 0xff; + + spi_claim_bus(boot_slave); + + if (spi_xfer(boot_slave, spi_read_cmd, + read_cmd_bytes, NULL, 0) < 0) { + ret = -1; + printk(BIOS_ERR, "%s: Failed to transfer %zu bytes\n", + __func__, sizeof(spi_read_cmd)); + goto tegra_spi_cbfs_read_exit; + } + + if (channel->dual_mode) { + setbits_le32(&channel->regs->command1, SPI_CMD1_BOTH_EN_BIT); + } + if (spi_xfer(boot_slave, NULL, 0, dest, count)) { + ret = -1; + printk(BIOS_ERR, "%s: Failed to transfer %zu bytes\n", + __func__, count); + } + if (channel->dual_mode) + clrbits_le32(&channel->regs->command1, SPI_CMD1_BOTH_EN_BIT); + +tegra_spi_cbfs_read_exit: + /* de-assert /CS */ + spi_release_bus(boot_slave); + return ret; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs) +{ + struct tegra_spi_channel *channel = to_tegra_spi(bus); + if (!channel) + return NULL; + + return &channel->slave; +} + +static const struct region_device_ops tegra_spi_ops = { + .mmap = mmap_helper_rdev_mmap, + .munmap = mmap_helper_rdev_munmap, + .readat = tegra_spi_readat, +}; + +__attribute__((unused)) +static struct mmap_helper_region_device mdev = + MMAP_HELPER_REGION_INIT(&tegra_spi_ops, 0, CONFIG_ROM_SIZE); + +#if !IS_ENABLED(CONFIG_COMMON_CBFS_SPI_WRAPPER) +const struct region_device *boot_device_ro(void) +{ + return &mdev.rdev; +} + +void boot_device_init(void) +{ + struct tegra_spi_channel *boot_chan; + + boot_chan = &tegra_spi_channels[CONFIG_BOOT_MEDIA_SPI_BUS - 1]; + boot_chan->slave.cs = CONFIG_BOOT_MEDIA_SPI_CHIP_SELECT; + +#if CONFIG_SPI_FLASH_FAST_READ_DUAL_OUTPUT_3B == 1 + boot_chan->dual_mode = 1; +#endif + boot_slave = &boot_chan->slave; + + mmap_helper_device_init(&mdev, _cbfs_cache, _cbfs_cache_size); +} +#endif -- cgit v1.2.3