From c6880b3e9db4200aaeb3e5531a5b4d86d86ab0ef Mon Sep 17 00:00:00 2001 From: Vinod Polimera Date: Tue, 3 Mar 2020 11:26:36 +0530 Subject: sc7180: Add display dsi interface programming This change adds support for sc7180 dsi interface host programming. Changes in V1: - remove dual dsi config code. - update register access using struct overlays. - remove dsc config & command mode code. Changes in V2: - remove dsi read and write functions. - remove target and panel related code. Changes in V3: - move prototypes to headers. - define macros for constants. Changes in V4: - define register bits instead of hardcoded values. Change-Id: Ie64354ce8bc2a64b891fb9478fbca38d6ec4c321 Signed-off-by: Vinod Polimera Reviewed-on: https://review.coreboot.org/c/coreboot/+/39614 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner --- src/soc/qualcomm/sc7180/Makefile.inc | 1 + src/soc/qualcomm/sc7180/display/dsi.c | 161 +++++++++++++++++++++ .../qualcomm/sc7180/include/soc/display/mipi_dsi.h | 27 ++++ 3 files changed, 189 insertions(+) create mode 100644 src/soc/qualcomm/sc7180/display/dsi.c create mode 100644 src/soc/qualcomm/sc7180/include/soc/display/mipi_dsi.h (limited to 'src/soc/qualcomm') diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc index bcb49657f7..ec6ab6c162 100644 --- a/src/soc/qualcomm/sc7180/Makefile.inc +++ b/src/soc/qualcomm/sc7180/Makefile.inc @@ -61,6 +61,7 @@ ramstage-y += qcom_qup_se.c ramstage-$(CONFIG_DRIVERS_UART) += qupv3_uart.c ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += display/dsi_phy_pll.c ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += display/dsi_phy.c +ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += display/dsi.c ################################################################################ diff --git a/src/soc/qualcomm/sc7180/display/dsi.c b/src/soc/qualcomm/sc7180/display/dsi.c new file mode 100644 index 0000000000..016531bda3 --- /dev/null +++ b/src/soc/qualcomm/sc7180/display/dsi.c @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include +#include +#include +#include + +#define DSI_DMA_STREAM1 0x0 +#define DSI_EMBED_MODE1 0x1 +#define DSI_POWER_MODE2 0x1 +#define DSI_PACK_TYPE1 0x0 +#define DSI_VC1 0x0 +#define DSI_DT1 0x0 +#define DSI_WC1 0x0 +#define DSI_EOF_BLLP_PWR 0x9 +#define DSI_DMA_TRIGGER_SEL 0x4 + +#define DSI_EN 0x1 +#define DSI_CLKLN_EN 0x1 +#define DSI_VIDEO_EN 0x1 + +#define HS_TX_TO 0xEA60 +#define TIMER_RESOLUTION 0x4 + +static void mdss_dsi_host_init(int num_of_lanes) +{ + uint8_t dlnx_en; + uint32_t ctrl_mode = BIT(8) | BIT(0); /* Enable DSI and CLKlane. */ + + switch (num_of_lanes) { + default: + case 1: + dlnx_en = 1; + break; + + case 2: + dlnx_en = 3; + break; + + case 3: + dlnx_en = 7; + break; + + case 4: + dlnx_en = 0x0F; + break; + } + + /* + * Need to send pixel data before sending the ON commands + * so need to configure controller to VIDEO MODE. + */ + ctrl_mode |= BIT(1); + + write32(&dsi0->trig_ctrl, DSI_DMA_STREAM1 << 8 | DSI_DMA_TRIGGER_SEL); + write32(&dsi0->ctrl, dlnx_en << 4 | ctrl_mode); + write32(&dsi0->cmd_mode_dma_ctrl, + DSI_EMBED_MODE1 << 28 | DSI_POWER_MODE2 << 26 | + DSI_PACK_TYPE1 << 24 | DSI_VC1 << 22 | DSI_DT1 << 16 | DSI_WC1); +} + +static void mdss_dsi_reset(void) +{ + /* + * Disable DSI Controller, DSI lane states, + * DSI command-mode and DSI video-mode engines + */ + write32(&dsi0->ctrl, 0x0); + + /* DSI soft reset */ + write32(&dsi0->soft_reset, 0x1); + write32(&dsi0->soft_reset, 0x0); + + /* set hs timer count speed */ + write32(&dsi0->hs_timer_ctrl, HS_TX_TO | TIMER_RESOLUTION << 16); + + /* dma fifo reset */ + write32(&dsi0->tpg_dma_fifo_reset, 0x1); + write32(&dsi0->tpg_dma_fifo_reset, 0x0); +} + +void mdss_dsi_video_mode_config(struct edid *edid, uint32_t bpp) +{ + uint16_t dst_format; + uint8_t lane_en = 15; /* Enable 4 lanes by default */ + uint16_t hfp, hbp, vfp, vbp; + + switch (bpp) { + case 16: + dst_format = DSI_VIDEO_DST_FORMAT_RGB565; + break; + case 18: + dst_format = DSI_VIDEO_DST_FORMAT_RGB666; + break; + case 24: + default: + dst_format = DSI_VIDEO_DST_FORMAT_RGB888; + break; + } + + hfp = edid->mode.hso; + hbp = edid->mode.hbl - edid->mode.hso; + vfp = edid->mode.vso; + vbp = edid->mode.vbl - edid->mode.vso; + + mdss_dsi_clock_config(); + + write32(&dsi0->video_mode_active_h, + ((edid->mode.ha + hbp) << 16) | + hbp); + + write32(&dsi0->video_mode_active_v, + ((edid->mode.va + vbp) << 16) | (vbp)); + + write32(&dsi0->video_mode_active_total, + ((edid->mode.va + vfp + + vbp - 1) << 16) | + (edid->mode.ha + hfp + + hbp - 1)); + + write32(&dsi0->video_mode_active_hsync, (edid->mode.hspw << 16) | 0); + write32(&dsi0->video_mode_active_vsync, 0x0); + write32(&dsi0->video_mode_active_vsync_vpos, edid->mode.vspw << 16 | 0); + + write32(&dsi0->video_mode_ctrl, + DSI_EOF_BLLP_PWR << 12 | dst_format << 4); + + write32(&dsi0->hs_timer_ctrl, HS_TX_TO | TIMER_RESOLUTION << 16); + + write32(&dsi0->ctrl, lane_en << 4 | DSI_VIDEO_EN << 1 | DSI_EN | DSI_CLKLN_EN << 8); +} + +enum cb_err mdss_dsi_config(struct edid *edid, uint32_t num_of_lanes, uint32_t bpp) +{ + mdss_dsi_reset(); + if ((mdss_dsi_phy_10nm_init(edid, num_of_lanes, bpp)) != 0) { + printk(BIOS_ERR, "dsi phy setup returned error\n"); + return CB_ERR; + } + + mdss_dsi_host_init(num_of_lanes); + + return CB_SUCCESS; +} + +void mdss_dsi_clock_config(void) +{ + /* Clock for AHI Bus Master, for DMA out from memory */ + write32(&dsi0->clk_ctrl, 0); + setbits32(&dsi0->clk_ctrl, DSI_AHBM_SCLK_ON | DSI_FORCE_ON_DYN_AHBM_HCLK); + + /* Clock for MDP/DSI, for DMA out from MDP */ + setbits32(&dsi0->clk_ctrl, DSI_FORCE_ON_DYN_AHBM_HCLK); + + /* Clock for rest of DSI */ + setbits32(&dsi0->clk_ctrl, DSI_AHBS_HCLK_ON | DSI_DSICLK_ON | + DSI_BYTECLK_ON | DSI_ESCCLK_ON); +} diff --git a/src/soc/qualcomm/sc7180/include/soc/display/mipi_dsi.h b/src/soc/qualcomm/sc7180/include/soc/display/mipi_dsi.h new file mode 100644 index 0000000000..47fd3084c6 --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/display/mipi_dsi.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef _SOC_DISPLAY_MIPI_DSI_H_ +#define _SOC_DISPLAY_MIPI_DSI_H_ + +/********************************************************** + DSI register configuration options + **********************************************************/ +#define MIPI_DSI_MRPS 0x04 /* Maximum Return Packet Size */ +#define MIPI_DSI_REG_LEN 16 /* 4 x 4 bytes register */ + +#define DSI_VIDEO_DST_FORMAT_RGB565 0 +#define DSI_VIDEO_DST_FORMAT_RGB666 1 +#define DSI_VIDEO_DST_FORMAT_RGB666_LOOSE 2 +#define DSI_VIDEO_DST_FORMAT_RGB888 3 + +enum { + DSI_VIDEO_MODE, + DSI_CMD_MODE, +}; + +enum cb_err mdss_dsi_config(struct edid *edid, uint32_t num_of_lanes, uint32_t bpp); +void mdss_dsi_clock_config(void); +void mdss_dsi_video_mode_config(struct edid *edid, + uint32_t bpp); + +#endif -- cgit v1.2.3