From 4f61f56be101d472990d631ab592f328117d5dbc Mon Sep 17 00:00:00 2001 From: Subrata Banik Date: Thu, 4 Jul 2019 16:26:58 +0530 Subject: soc/intel/common/block/sata: Convert DWORD width Read/Write to BYTE width As per EDS Sata port implemented register is byte width (bits[3:0]) hence converting required DWORD based read/write to BYTE width read/write. TEST=Able to boot from SATA device on CML hatch. Change-Id: I545b823318bae461137d41a4490117eba7c87330 Signed-off-by: Subrata Banik Reviewed-on: https://review.coreboot.org/c/coreboot/+/34070 Reviewed-by: Aamir Bohra Reviewed-by: Paul Menzel Tested-by: build bot (Jenkins) --- src/soc/intel/common/block/sata/sata.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'src/soc') diff --git a/src/soc/intel/common/block/sata/sata.c b/src/soc/intel/common/block/sata/sata.c index 0801cb77c4..7dacc6ed92 100644 --- a/src/soc/intel/common/block/sata/sata.c +++ b/src/soc/intel/common/block/sata/sata.c @@ -43,14 +43,14 @@ static void *sata_get_ahci_bar(struct device *dev) static void sata_final(struct device *dev) { void *ahcibar = sata_get_ahci_bar(dev); - u32 port_impl, temp; + u8 port_impl, temp; /* Set Bus Master */ temp = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, temp | PCI_COMMAND_MASTER); /* Read Ports Implemented (GHC_PI) */ - port_impl = read32(ahcibar + SATA_ABAR_PORT_IMPLEMENTED); + port_impl = read8(ahcibar + SATA_ABAR_PORT_IMPLEMENTED); if (CONFIG(SOC_AHCI_PORT_IMPLEMENTED_INVERT)) port_impl = ~port_impl; @@ -58,9 +58,9 @@ static void sata_final(struct device *dev) port_impl &= 0x07; /* bit 0-2 */ /* Port enable */ - temp = pci_read_config32(dev, SATA_PCI_CFG_PORT_CTL_STS); + temp = pci_read_config8(dev, SATA_PCI_CFG_PORT_CTL_STS); temp |= port_impl; - pci_write_config32(dev, SATA_PCI_CFG_PORT_CTL_STS, temp); + pci_write_config8(dev, SATA_PCI_CFG_PORT_CTL_STS, temp); } static struct device_operations sata_ops = { -- cgit v1.2.3