From ddf845f620eb43d9ea2e8b0b265c321c6e797e6f Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Thu, 10 May 2007 23:22:27 +0000 Subject: This patch cleans up and clarifies Geode source code comments. Signed-off-by: Marc Jones Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2658 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/southbridge/amd/cs5536/cs5536_early_setup.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'src/southbridge/amd/cs5536/cs5536_early_setup.c') diff --git a/src/southbridge/amd/cs5536/cs5536_early_setup.c b/src/southbridge/amd/cs5536/cs5536_early_setup.c index d534bead90..d6ba089402 100644 --- a/src/southbridge/amd/cs5536/cs5536_early_setup.c +++ b/src/southbridge/amd/cs5536/cs5536_early_setup.c @@ -97,10 +97,10 @@ static void cs5536_setup_power_button(void) /* Power Button Setup */ outl(0x40020000, PMS_IO_BASE + 0x40); - /* setup GPIO24, it is the external signal for 5536 vsb_work_aux - * which controls all voltage rails except Vstandby & Vmem. + /* setup WORK_AUX/GPIO24, it is the external signal for 5536 + * vsb_work_aux controls all voltage rails except Vstandby & Vmem. * We need to enable, OUT_AUX1 and OUTPUT_ENABLE in this order. - * If GPIO24 is not enabled then soft-off will not work. + * If WORK_AUX/GPIO24 is not enabled then soft-off will not work. */ outl(GPIOH_24_SET, GPIO_IO_BASE + GPIOH_OUT_AUX1_SELECT); outl(GPIOH_24_SET, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); @@ -127,7 +127,7 @@ static void cs5536_disable_internal_uart(void) { msr_t msr; /* The UARTs default to enabled. - * Disable and reset them and configure them later. (SIO init) + * Disable and reset them and configure them later. (SIO init) */ msr = rdmsr(MDD_UART1_CONF); msr.lo = 1; // reset -- cgit v1.2.3