From 66a02c1ef3d181f9d83bb6847f14e812ae1a0a8d Mon Sep 17 00:00:00 2001 From: Antonello Dettori Date: Sat, 3 Sep 2016 10:45:33 +0200 Subject: southbridge/amd/sb800: transition away from device_t Replace the use of the old device_t definition inside southbridge/amd/sb800. Change-Id: I488cde4504128331106f50b34869905e30f5ab83 Signed-off-by: Antonello Dettori Reviewed-on: https://review.coreboot.org/16480 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/southbridge/amd/sb800/early_setup.c | 14 +++++++------- src/southbridge/amd/sb800/sb800.h | 3 +++ 2 files changed, 10 insertions(+), 7 deletions(-) (limited to 'src/southbridge/amd') diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c index ac0691785b..070c1f535b 100644 --- a/src/southbridge/amd/sb800/early_setup.c +++ b/src/southbridge/amd/sb800/early_setup.c @@ -73,7 +73,7 @@ static void sb800_acpi_init(void) /* RPR 2.28 Get SB ASIC Revision.*/ static u8 get_sb800_revision(void) { - device_t dev; + pci_devfn_t dev; u8 rev_id; u8 rev = 0; @@ -123,7 +123,7 @@ void sb800_clk_output_48Mhz(void) static void sb800_lpc_init(void) { u8 reg8; - device_t dev; + pci_devfn_t dev; //dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); /* SMBUS controller */ dev = PCI_DEV(0, 0x14, 0); @@ -166,7 +166,7 @@ static void sb800_lpc_init(void) /* what is its usage? */ static u32 get_sbdn(u32 bus) { - device_t dev; + pci_devfn_t dev; /* Find the device. */ dev = PCI_DEV(bus, 0x14, 0);//pci_locate_device_on_bus(PCI_ID(0x1002, 0x4385), bus); @@ -238,7 +238,7 @@ void soft_reset(void) void sb800_pci_port80(void) { u8 byte; - device_t dev; + pci_devfn_t dev; /* P2P Bridge */ dev = PCI_DEV(0, 0x14, 4);//pci_locate_device(PCI_ID(0x1002, 0x4384), 0); @@ -344,7 +344,7 @@ struct pm_entry const pm_table[] = void sb800_lpc_port80(void) { u8 byte; - device_t dev; + pci_devfn_t dev; /* Enable LPC controller */ byte = pmio_read(0xEC); @@ -361,7 +361,7 @@ void sb800_lpc_port80(void) /* sbDevicesPorInitTable */ static void sb800_devices_por_init(void) { - device_t dev; + pci_devfn_t dev; u8 byte; printk(BIOS_INFO, "sb800_devices_por_init()\n"); @@ -543,7 +543,7 @@ static void sb800_pmio_por_init(void) */ static void sb800_pci_cfg(void) { - device_t dev; + pci_devfn_t dev; u8 byte; /* SMBus Device, BDF:0-20-0 */ diff --git a/src/southbridge/amd/sb800/sb800.h b/src/southbridge/amd/sb800/sb800.h index 6a037cf4e8..b36d9bfad5 100644 --- a/src/southbridge/amd/sb800/sb800.h +++ b/src/southbridge/amd/sb800/sb800.h @@ -42,7 +42,10 @@ void pm_iowrite(u8 reg, u8 value); u8 pm_ioread(u8 reg); void pm2_iowrite(u8 reg, u8 value); u8 pm2_ioread(u8 reg); + +#ifndef __SIMPLE_DEVICE__ void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val); +#endif #define REV_SB800_A11 0x11 #define REV_SB800_A12 0x12 -- cgit v1.2.3