From 1dcd8dbf760cd7b324d3a20f9e5f1c36fa95b5eb Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Wed, 5 Dec 2018 10:59:42 +0100 Subject: src/southbridge: Get rid of device_t Use of device_t is deprecated. Change-Id: Ib4db9c263ff156966926f9576eed7e3cfb02e78a Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/c/30045 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph --- src/southbridge/intel/lynxpoint/me_9.x.c | 41 +++++++++++++++++++++--------- src/southbridge/intel/lynxpoint/pch.c | 9 ++++--- src/southbridge/intel/lynxpoint/usb_xhci.c | 18 ++++++++++--- 3 files changed, 50 insertions(+), 18 deletions(-) (limited to 'src/southbridge/intel/lynxpoint') diff --git a/src/southbridge/intel/lynxpoint/me_9.x.c b/src/southbridge/intel/lynxpoint/me_9.x.c index 574a8308d6..1a0a68c9db 100644 --- a/src/southbridge/intel/lynxpoint/me_9.x.c +++ b/src/southbridge/intel/lynxpoint/me_9.x.c @@ -52,12 +52,16 @@ static const char *me_bios_path_values[] = { [ME_DISABLE_BIOS_PATH] = "Disable", [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", }; -static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev); +static int intel_me_read_mbp(me_bios_payload *mbp_data, struct device *dev); #endif /* MMIO base address for MEI interface */ static u32 *mei_base_address; -void intel_me_mbp_clear(device_t dev); +#ifdef __SIMPLE_DEVICE__ +void intel_me_mbp_clear(pci_devfn_t dev); +#else +void intel_me_mbp_clear(struct device *dev); +#endif #if IS_ENABLED(CONFIG_DEBUG_INTEL_ME) static void mei_dump(void *ptr, int dword, int offset, const char *type) @@ -112,7 +116,11 @@ static inline void mei_write_dword_ptr(void *ptr, int offset) mei_dump(ptr, dword, offset, "WRITE"); } -static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset) +#ifdef __SIMPLE_DEVICE__ +static inline void pci_read_dword_ptr(pci_devfn_t dev, void *ptr, int offset) +#else +static inline void pci_read_dword_ptr(struct device *dev, void *ptr, int offset) +#endif { u32 dword = pci_read_config32(dev, offset); memcpy(ptr, &dword, sizeof(dword)); @@ -413,7 +421,11 @@ static inline int mei_sendrecv_mkhi(struct mkhi_header *mkhi, * mbp give up routine. This path is taken if hfs.mpb_rdy is 0 or the read * state machine on the BIOS end doesn't match the ME's state machine. */ -static void intel_me_mbp_give_up(device_t dev) +#ifdef __SIMPLE_DEVICE__ +static void intel_me_mbp_give_up(pci_devfn_t dev) +#else +static void intel_me_mbp_give_up(struct device *dev) +#endif { struct mei_csr csr; @@ -429,7 +441,11 @@ static void intel_me_mbp_give_up(device_t dev) * mbp clear routine. This will wait for the ME to indicate that * the MBP has been read and cleared. */ -void intel_me_mbp_clear(device_t dev) +#ifdef __SIMPLE_DEVICE__ +void intel_me_mbp_clear(pci_devfn_t dev) +#else +void intel_me_mbp_clear(struct device *dev) +#endif { int count; struct me_hfs2 hfs2; @@ -657,7 +673,7 @@ static int me_icc_set_clock_enables(u32 mask) } /* Determine the path that we should take based on ME status */ -static me_bios_path intel_me_path(device_t dev) +static me_bios_path intel_me_path(struct device *dev) { me_bios_path path = ME_DISABLE_BIOS_PATH; struct me_hfs hfs; @@ -727,7 +743,7 @@ static me_bios_path intel_me_path(device_t dev) } /* Prepare ME for MEI messages */ -static int intel_mei_setup(device_t dev) +static int intel_mei_setup(struct device *dev) { struct resource *res; struct mei_csr host; @@ -757,7 +773,7 @@ static int intel_mei_setup(device_t dev) } /* Read the Extend register hash of ME firmware */ -static int intel_me_extend_valid(device_t dev) +static int intel_me_extend_valid(struct device *dev) { struct me_heres status; u32 extend[8] = {0}; @@ -804,7 +820,7 @@ static int intel_me_extend_valid(device_t dev) } /* Check whether ME is present and do basic init */ -static void intel_me_init(device_t dev) +static void intel_me_init(struct device *dev) { struct southbridge_intel_lynxpoint_config *config = dev->chip_info; me_bios_path path = intel_me_path(dev); @@ -857,7 +873,8 @@ static void intel_me_init(device_t dev) */ } -static void set_subsystem(device_t dev, unsigned vendor, unsigned device) +static void set_subsystem(struct device *dev, unsigned int vendor, + unsigned int device) { if (!vendor || !device) { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, @@ -872,7 +889,7 @@ static struct pci_operations pci_ops = { .set_subsystem = set_subsystem, }; -static void intel_me_enable(device_t dev) +static void intel_me_enable(struct device *dev) { /* Avoid talking to the device in S3 path */ if (acpi_is_wakeup_s3()) { @@ -939,7 +956,7 @@ struct mbp_payload { * mbp seems to be following its own flow, let's retrieve it in a dedicated * function. */ -static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev) +static int intel_me_read_mbp(me_bios_payload *mbp_data, struct device *dev) { mbp_header mbp_hdr; u32 me2host_pending; diff --git a/src/southbridge/intel/lynxpoint/pch.c b/src/southbridge/intel/lynxpoint/pch.c index cb01de7496..6596aa2f5d 100644 --- a/src/southbridge/intel/lynxpoint/pch.c +++ b/src/southbridge/intel/lynxpoint/pch.c @@ -23,14 +23,17 @@ #include #include "pch.h" -static device_t pch_get_lpc_device(void) +#ifdef __SIMPLE_DEVICE__ +static pci_devfn_t pch_get_lpc_device(void) { -#ifdef __SMM__ return PCI_DEV(0, 0x1f, 0); +} #else +static struct device *pch_get_lpc_device(void) +{ return dev_find_slot(0, PCI_DEVFN(0x1f, 0)); -#endif } +#endif int pch_silicon_revision(void) { diff --git a/src/southbridge/intel/lynxpoint/usb_xhci.c b/src/southbridge/intel/lynxpoint/usb_xhci.c index 186e3f9c6f..03341da829 100644 --- a/src/southbridge/intel/lynxpoint/usb_xhci.c +++ b/src/southbridge/intel/lynxpoint/usb_xhci.c @@ -23,7 +23,11 @@ typedef struct southbridge_intel_lynxpoint_config config_t; -static u8 *usb_xhci_mem_base(device_t dev) +#ifdef __SIMPLE_DEVICE__ +static u8 *usb_xhci_mem_base(pci_devfn_t dev) +#else +static u8 *usb_xhci_mem_base(struct device *dev) +#endif { u32 mem_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); @@ -34,7 +38,11 @@ static u8 *usb_xhci_mem_base(device_t dev) return (u8 *)(mem_base & ~0xf); } -static int usb_xhci_port_count_usb3(device_t dev) +#ifdef __SIMPLE_DEVICE__ +static int usb_xhci_port_count_usb3(pci_devfn_t dev) +#else +static int usb_xhci_port_count_usb3(struct device *dev) +#endif { if (pch_is_lp()) { /* LynxPoint-LP has 4 SS ports */ @@ -81,7 +89,11 @@ static void usb_xhci_reset_port_usb3(u8 *mem_base, int port) * b) Poll for warm reset complete * c) Write 1 to port change status bits */ -static void usb_xhci_reset_usb3(device_t dev, int all) +#ifdef __SIMPLE_DEVICE__ +static void usb_xhci_reset_usb3(pci_devfn_t dev, int all) +#else +static void usb_xhci_reset_usb3(struct device *dev, int all) +#endif { u32 status, port_disabled; int timeout, port; -- cgit v1.2.3