From c02b4fc9db3c3c1e263027382697b566127f66bb Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Mon, 22 Mar 2010 11:42:32 +0000 Subject: printk_foo -> printk(BIOS_FOO, ...) Signed-off-by: Stefan Reinauer Acked-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/southbridge/via/vt8231/vt8231_lpc.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'src/southbridge/via/vt8231/vt8231_lpc.c') diff --git a/src/southbridge/via/vt8231/vt8231_lpc.c b/src/southbridge/via/vt8231/vt8231_lpc.c index cee46b51bb..9799195d87 100644 --- a/src/southbridge/via/vt8231/vt8231_lpc.c +++ b/src/southbridge/via/vt8231/vt8231_lpc.c @@ -23,7 +23,7 @@ static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 }; static void pci_routing_fixup(struct device *dev) { - printk_info("%s: dev is %p\n", __func__, dev); + printk(BIOS_INFO, "%s: dev is %p\n", __func__, dev); if (dev) { /* initialize PCI interupts - these assignments depend on the PCB routing of PINTA-D @@ -39,17 +39,17 @@ static void pci_routing_fixup(struct device *dev) } // Standard southbridge components - printk_info("setting southbridge\n"); + printk(BIOS_INFO, "setting southbridge\n"); pci_assign_irqs(0, 0x11, southbridgeIrqs); // Ethernet built into southbridge - printk_info("setting ethernet\n"); + printk(BIOS_INFO, "setting ethernet\n"); pci_assign_irqs(0, 0x12, enetIrqs); // PCI slot - printk_info("setting pci slot\n"); + printk(BIOS_INFO, "setting pci slot\n"); pci_assign_irqs(0, 0x14, slotIrqs); - printk_info("%s: DONE\n", __func__); + printk(BIOS_INFO, "%s: DONE\n", __func__); } static void vt8231_init(struct device *dev) @@ -57,7 +57,7 @@ static void vt8231_init(struct device *dev) unsigned char enables; struct southbridge_via_vt8231_config *conf = dev->chip_info; - printk_debug("vt8231 init\n"); + printk(BIOS_DEBUG, "vt8231 init\n"); // enable the internal I/O decode enables = pci_read_config8(dev, 0x6C); @@ -102,18 +102,18 @@ static void vt8231_init(struct device *dev) // First do some more things to devfn (17,0) // note: this should already be cleared, according to the book. enables = pci_read_config8(dev, 0x50); - printk_debug("IDE enable in reg. 50 is 0x%x\n", enables); + printk(BIOS_DEBUG, "IDE enable in reg. 50 is 0x%x\n", enables); enables &= ~8; // need manifest constant here! - printk_debug("set IDE reg. 50 to 0x%x\n", enables); + printk(BIOS_DEBUG, "set IDE reg. 50 to 0x%x\n", enables); pci_write_config8(dev, 0x50, enables); // set default interrupt values (IDE) enables = pci_read_config8(dev, 0x4c); - printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf); + printk(BIOS_DEBUG, "IRQs in reg. 4c are 0x%x\n", enables & 0xf); // clear out whatever was there. enables &= ~0xf; enables |= 4; - printk_debug("setting reg. 4c to 0x%x\n", enables); + printk(BIOS_DEBUG, "setting reg. 4c to 0x%x\n", enables); pci_write_config8(dev, 0x4c, enables); // set up the serial port interrupts. -- cgit v1.2.3