From 3c976791b06c75e8983266b3551f133d89924376 Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Sun, 23 Oct 2011 15:30:29 +0200 Subject: i82801gx: Don't set I/O base address to static value Doing it this way will break all subsequent smbus calls, because the smbus code still uses res->base, which points to the old base address. Fix this by allocating a proper resource. Change-Id: I0f3d8fba5f8e2db7fe4ca991ef2c345aff436ea4 Signed-off-by: Sven Schnelle Reviewed-on: http://review.coreboot.org/325 Reviewed-by: Rudolf Marek Tested-by: build bot (Jenkins) --- src/southbridge/intel/i82801gx/smbus.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) (limited to 'src/southbridge') diff --git a/src/southbridge/intel/i82801gx/smbus.c b/src/southbridge/intel/i82801gx/smbus.c index 834f310c6c..f296b46fb3 100644 --- a/src/southbridge/intel/i82801gx/smbus.c +++ b/src/southbridge/intel/i82801gx/smbus.c @@ -29,19 +29,6 @@ #include "i82801gx.h" #include "smbus.h" -#define SMB_BASE 0x20 -static void smbus_init(struct device *dev) -{ - u32 smb_base; - - smb_base = pci_read_config32(dev, SMB_BASE); - printk(BIOS_DEBUG, "Initializing SMBus device:\n"); - printk(BIOS_DEBUG, " Old SMBUS Base Address: 0x%04x\n", smb_base); - pci_write_config32(dev, SMB_BASE, 0x00000401); - smb_base = pci_read_config32(dev, SMB_BASE); - printk(BIOS_DEBUG, " New SMBUS Base Address: 0x%04x\n", smb_base); -} - static int lsmbus_read_byte(device_t dev, u8 address) { u16 device; @@ -74,11 +61,20 @@ static struct pci_operations smbus_pci_ops = { .set_subsystem = smbus_set_subsystem, }; +static void smbus_read_resources(device_t dev) +{ + struct resource *res = new_resource(dev, PCI_BASE_ADDRESS_4); + res->base = SMBUS_IO_BASE; + res->size = 32; + res->limit = res->base + res->size - 1; + res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE | + IORESOURCE_STORED | IORESOURCE_ASSIGNED; +} + static struct device_operations smbus_ops = { - .read_resources = pci_dev_read_resources, + .read_resources = smbus_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, - .init = smbus_init, .scan_bus = scan_static_bus, .enable = i82801gx_enable, .ops_smbus_bus = &lops_smbus_bus, -- cgit v1.2.3