From 4e8f23b896fe31851c26e056ee55fb8191419fa0 Mon Sep 17 00:00:00 2001
From: Ted Kuo <tedkuo@ami.com.tw>
Date: Wed, 18 Mar 2015 10:42:22 +0800
Subject: superio/it8772f: Add switch to enable HWM (Hardware Monitor)

Set up External Temperature to read via thermal diode/resistor
into TMPINx register by setting thermal_mode switch.

Original-Signed-off-by: Ted Kuo <tedkuo@ami.com.tw>

Change-Id: I0e8621b92faa5c6246e009d2f852c8d4db484034
Original-Reviewed-on: https://chromium-review.googlesource.com/260545
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Original-(cherry picked from commit 973e2d393f2595b756f8aa20f6fbe3b6e045621a)
Original-Reviewed-on: https://chromium-review.googlesource.com/262340
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/12798
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
 src/superio/ite/it8772f/chip.h    |  7 +++++++
 src/superio/ite/it8772f/it8772f.h |  8 +++++++
 src/superio/ite/it8772f/superio.c | 44 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 59 insertions(+)

(limited to 'src/superio/ite')

diff --git a/src/superio/ite/it8772f/chip.h b/src/superio/ite/it8772f/chip.h
index 78ded22b5d..0d80fb833c 100644
--- a/src/superio/ite/it8772f/chip.h
+++ b/src/superio/ite/it8772f/chip.h
@@ -18,6 +18,7 @@
 #define SUPERIO_ITE_IT8772F_CHIP_H
 
 #include <device/device.h>
+#include "it8772f.h"
 
 struct superio_ite_it8772f_config {
 	/* GPIO SimpleIO register values via devicetree.cb */
@@ -36,6 +37,12 @@ struct superio_ite_it8772f_config {
 	 */
 	u8 peci_tmpin;
 
+	/*
+	 * Enable thermal mode on tmpinx.
+	 */
+	enum thermal_mode tmpin1_mode;
+	enum thermal_mode tmpin2_mode;
+
 	/*
 	 * Enable a FAN for sofware control.
 	 */
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h
index 8e82bef6ab..2031fffda8 100644
--- a/src/superio/ite/it8772f/it8772f.h
+++ b/src/superio/ite/it8772f/it8772f.h
@@ -17,6 +17,13 @@
 #ifndef SUPERIO_ITE_IT8772F_H
 #define SUPERIO_ITE_IT8772F_H
 
+/* Supported thermal mode on TMPINx */
+enum thermal_mode {
+	THERMAL_MODE_DISABLED	= 0,
+	THERMAL_DIODE,
+	THERMAL_RESISTOR,
+};
+
 #define IT8772F_FDC  0x00 /* Floppy disk controller */
 #define IT8772F_SP1  0x01 /* Com1 */
 #define IT8772F_EC   0x04 /* Environment controller */
@@ -26,6 +33,7 @@
 #define IT8772F_IR   0x0a /* Consumer IR */
 
 /* Environmental Controller interface */
+#define IT8772F_CONFIGURATION			0x00
 #define IT8772F_INTERFACE_SELECT		0x0a
 #define  IT8772F_INTERFACE_PSEUDO_EOC		(1 << 7)
 #define  IT8772F_INTERFACE_SMB_ENABLE		(1 << 6)
diff --git a/src/superio/ite/it8772f/superio.c b/src/superio/ite/it8772f/superio.c
index 7079b1a829..2d897d83ba 100644
--- a/src/superio/ite/it8772f/superio.c
+++ b/src/superio/ite/it8772f/superio.c
@@ -16,6 +16,7 @@
 
 #include <device/device.h>
 #include <device/pnp.h>
+#include <console/console.h>
 #include <pc80/keyboard.h>
 #include <arch/io.h>
 #include <delay.h>
@@ -96,6 +97,43 @@ static void it8772f_enable_peci(struct resource *res, int tmpin)
 			   (tmpin & 3) << 6);
 }
 
+/*
+ * Set up External Temperature to read via thermal diode/resistor
+ * into TMPINx register
+ */
+static void it8772f_enable_tmpin(struct resource *res, int tmpin,
+				enum thermal_mode mode)
+{
+	u8 reg;
+
+	if (tmpin != 1 && tmpin != 2)
+		return;
+
+	reg = it8772f_envc_read(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE);
+
+	switch (mode) {
+	case THERMAL_DIODE:
+		/* Thermal Diode Mode */
+		it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
+				   reg | tmpin);
+		break;
+	case THERMAL_RESISTOR:
+		/* Thermal Resistor Mode */
+		it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
+				   reg | (tmpin << 3));
+		break;
+	default:
+		printk(BIOS_ERR, "Unsupported thermal mode 0x%x on TMPIN%d\n",
+			mode, tmpin);
+		return;
+	}
+
+	reg = it8772f_envc_read(res, IT8772F_CONFIGURATION);
+
+	/* Enable the startup of monitoring operation */
+	it8772f_envc_write(res, IT8772F_CONFIGURATION, reg | 0x01);
+}
+
 /*
  * Setup a FAN PWM interface for software control
  */
@@ -160,6 +198,12 @@ static void it8772f_init(struct device *dev)
 		/* Enable PECI if configured */
 		it8772f_enable_peci(res, conf->peci_tmpin);
 
+		/* Enable HWM if configured */
+		if (conf->tmpin1_mode != THERMAL_MODE_DISABLED)
+			it8772f_enable_tmpin(res, 1, conf->tmpin1_mode);
+		if (conf->tmpin2_mode != THERMAL_MODE_DISABLED)
+			it8772f_enable_tmpin(res, 2, conf->tmpin2_mode);
+
 		/* Enable FANx if configured */
 		if (conf->fan1_enable)
 			it8772f_enable_fan(res, 1);
-- 
cgit v1.2.3