From 01f887d9f8546be08b51a2752af0473ab51e4214 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Thu, 25 Mar 2004 09:31:10 +0000 Subject: Merging patches from Yinghai Lu (fb2_s4882_changes.diff.bz2): - new motherboard: Tyan s4882 - minor changes to 2880, s2881, s2885, s4880 git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1474 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/tyan/s2880/Config.lb | 3 +- src/mainboard/tyan/s2880/mainboard.c | 6 +- src/mainboard/tyan/s2881/auto.c | 5 +- src/mainboard/tyan/s2881/mainboard.c | 6 +- src/mainboard/tyan/s2882/Config.lb | 3 +- src/mainboard/tyan/s2885/Config.lb | 1 + src/mainboard/tyan/s2885/auto.c | 9 +- src/mainboard/tyan/s2885/mainboard.c | 8 +- src/mainboard/tyan/s4880/Config.lb | 4 +- src/mainboard/tyan/s4880/auto.c | 9 +- src/mainboard/tyan/s4882/Config.lb | 245 +++++++++++++++++++++++++++++ src/mainboard/tyan/s4882/VERSION | 1 + src/mainboard/tyan/s4882/auto.c | 277 +++++++++++++++++++++++++++++++++ src/mainboard/tyan/s4882/chip.h | 6 + src/mainboard/tyan/s4882/cmos.layout | 96 ++++++++++++ src/mainboard/tyan/s4882/failover.c | 80 ++++++++++ src/mainboard/tyan/s4882/irq_tables.c | 46 ++++++ src/mainboard/tyan/s4882/mainboard.c | 192 +++++++++++++++++++++++ src/mainboard/tyan/s4882/mptable.c | 198 +++++++++++++++++++++++ src/mainboard/tyan/s4882/resourcemap.c | 264 +++++++++++++++++++++++++++++++ 20 files changed, 1430 insertions(+), 29 deletions(-) create mode 100644 src/mainboard/tyan/s4882/Config.lb create mode 100644 src/mainboard/tyan/s4882/VERSION create mode 100644 src/mainboard/tyan/s4882/auto.c create mode 100644 src/mainboard/tyan/s4882/chip.h create mode 100644 src/mainboard/tyan/s4882/cmos.layout create mode 100644 src/mainboard/tyan/s4882/failover.c create mode 100644 src/mainboard/tyan/s4882/irq_tables.c create mode 100644 src/mainboard/tyan/s4882/mainboard.c create mode 100644 src/mainboard/tyan/s4882/mptable.c create mode 100644 src/mainboard/tyan/s4882/resourcemap.c (limited to 'src') diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index 275170ac9f..892429686d 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -32,7 +32,7 @@ default LB_CKS_LOC=123 driver mainboard.o -#driver lsi_scsi.o +driver lsi_scsi.o #driver adaptec_scsi.o #driver promise_sata.o #driver intel_nic.o @@ -179,6 +179,7 @@ northbridge amd/amdk8 "mc0" io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 + irq 0x72 = 12 pnp 2e.6 off # CIR pnp 2e.7 off # GAME_MIDI_GIPO1 pnp 2e.8 off # GPIO2 diff --git a/src/mainboard/tyan/s2880/mainboard.c b/src/mainboard/tyan/s2880/mainboard.c index c8521963d8..17ceb5d916 100644 --- a/src/mainboard/tyan/s2880/mainboard.c +++ b/src/mainboard/tyan/s2880/mainboard.c @@ -120,7 +120,7 @@ static void onboard_scsi_fixup(void) // print_mem(); // amd8111_enable_rom(); } -#if 1 +#if 0 static void vga_fixup(void) { // we do this right here because: // - all the hardware is working, and some VGA bioses seem to need @@ -154,8 +154,8 @@ enable(struct chip *chip, enum chip_pass pass) case CONF_PASS_PRE_BOOT: if (conf->fixup_scsi) onboard_scsi_fixup(); - if (conf->fixup_vga) - vga_fixup(); +// if (conf->fixup_vga) +// vga_fixup(); printk_debug("mainboard fixup pass %d done\r\n", pass); break; diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c index 5f5069cc97..be11efb4ed 100644 --- a/src/mainboard/tyan/s2881/auto.c +++ b/src/mainboard/tyan/s2881/auto.c @@ -113,9 +113,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } -/* include mainboard specific ht code */ -#include "hypertransport.c" - #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" @@ -166,7 +163,7 @@ static void main(void) console_init(); setup_s2881_resource_map(); needs_reset = setup_coherent_ht_domain(); - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0); if (needs_reset) { print_info("ht reset -"); soft_reset(); diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c index aa99f64894..3ba458866c 100644 --- a/src/mainboard/tyan/s2881/mainboard.c +++ b/src/mainboard/tyan/s2881/mainboard.c @@ -120,7 +120,7 @@ static void onboard_scsi_fixup(void) // print_mem(); // amd8111_enable_rom(); } -#if 1 +#if 0 static void vga_fixup(void) { // we do this right here because: // - all the hardware is working, and some VGA bioses seem to need @@ -154,8 +154,8 @@ enable(struct chip *chip, enum chip_pass pass) case CONF_PASS_PRE_BOOT: if (conf->fixup_scsi) onboard_scsi_fixup(); - if (conf->fixup_vga) - vga_fixup(); +// if (conf->fixup_vga) +// vga_fixup(); printk_debug("mainboard fixup pass %d done\r\n", pass); break; diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index c307568267..c62ea733da 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -35,7 +35,7 @@ default LB_CKS_LOC=123 driver mainboard.o #driver adaptec_scsi.o #driver si_sata.o -driver intel_nic.o +#driver intel_nic.o #driver broadcom_nic.o #object reset.o if HAVE_MP_TABLE object mptable.o end @@ -196,6 +196,7 @@ northbridge amd/amdk8 "mc0" io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 + irq 0x72 = 12 pnp 2e.6 off # CIR pnp 2e.7 off # GAME_MIDI_GIPO1 pnp 2e.8 off # GPIO2 diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index c0b61145cb..db6b2f030c 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -198,6 +198,7 @@ northbridge amd/amdk8 "mc0" io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 + irq 0x72 = 12 pnp 2e.6 off # CIR pnp 2e.7 off # GAME_MIDI_GIPO1 pnp 2e.8 off # GPIO2 diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c index 135418bdcb..307331375c 100644 --- a/src/mainboard/tyan/s2885/auto.c +++ b/src/mainboard/tyan/s2885/auto.c @@ -29,7 +29,7 @@ static void hard_reset(void) set_bios_reset(); /* enable cf9 */ - pci_write_config8(PCI_DEV(1, 0x04, 3), 0x41, 0xf1); + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); /* reset */ outb(0x0e, 0x0cf9); } @@ -37,7 +37,7 @@ static void hard_reset(void) static void soft_reset(void) { set_bios_reset(); - pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); } #define REV_B_RESET 0 @@ -114,9 +114,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } -/* include mainboard specific ht code */ -#include "hypertransport.c" - #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" @@ -167,7 +164,7 @@ static void main(void) console_init(); setup_s2885_resource_map(); needs_reset = setup_coherent_ht_domain(); - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0); if (needs_reset) { print_info("ht reset -"); soft_reset(); diff --git a/src/mainboard/tyan/s2885/mainboard.c b/src/mainboard/tyan/s2885/mainboard.c index cd2a9679fa..e142f1b6d7 100644 --- a/src/mainboard/tyan/s2885/mainboard.c +++ b/src/mainboard/tyan/s2885/mainboard.c @@ -119,7 +119,7 @@ static void onboard_scsi_fixup(void) // print_mem(); // amd8111_enable_rom(); } - +#if 0 static void vga_fixup(void) { // we do this right here because: // - all the hardware is working, and some VGA bioses seem to need @@ -136,6 +136,8 @@ static void vga_fixup(void) { #endif } + +#endif static void @@ -153,8 +155,8 @@ enable(struct chip *chip, enum chip_pass pass) case CONF_PASS_PRE_BOOT: if (conf->fixup_scsi) onboard_scsi_fixup(); - if (conf->fixup_vga) - vga_fixup(); +// if (conf->fixup_vga) +// vga_fixup(); printk_debug("mainboard fixup pass %d done\r\n", pass); break; diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb index 69e647984f..4f85e44252 100644 --- a/src/mainboard/tyan/s4880/Config.lb +++ b/src/mainboard/tyan/s4880/Config.lb @@ -33,9 +33,9 @@ default LB_CKS_RANGE_END=122 default LB_CKS_LOC=123 driver mainboard.o -#driver lsi_scsi.o +driver lsi_scsi.o #driver adaptec_scsi.o -#driver si_sata.o +driver si_sata.o #driver intel_nic.o #object reset.o if HAVE_MP_TABLE object mptable.o end diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c index 031020323a..8f291f0964 100644 --- a/src/mainboard/tyan/s4880/auto.c +++ b/src/mainboard/tyan/s4880/auto.c @@ -28,7 +28,7 @@ static void hard_reset(void) set_bios_reset(); /* enable cf9 */ - pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + pci_write_config8(PCI_DEV(1, 0x04, 3), 0x41, 0xf1); /* reset */ outb(0x0e, 0x0cf9); } @@ -36,7 +36,7 @@ static void hard_reset(void) static void soft_reset(void) { set_bios_reset(); - pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); + pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1); } @@ -121,11 +121,8 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } -/* include mainboard specific ht code */ -#include "hypertransport.c" - - #include "northbridge/amd/amdk8/raminit.c" + #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb new file mode 100644 index 0000000000..ea826238b5 --- /dev/null +++ b/src/mainboard/tyan/s4882/Config.lb @@ -0,0 +1,245 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD +uses ARCH +uses HARD_RESET_BUS +uses HARD_RESET_DEVICE +uses HARD_RESET_FUNCTION + +# +# +### +### Set all of the defaults for an x86 architecture +### +# +# +### +### Build the objects we have code for in this directory. +### +##object mainboard.o +config chip.h +register "fixup_scsi" = "1" +#register "fixup_vga" = "1" + + +## +## Move the default LinuxBIOS cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +driver mainboard.o +driver lsi_scsi.o +#driver adaptec_scsi.o +driver si_sata.o +#driver intel_nic.o +#object reset.o +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end +# +default HARD_RESET_BUS=1 +default HARD_RESET_DEVICE=4 +default HARD_RESET_FUNCTION=0 +# +arch i386 end +#cpu k8 end +# +### +### Build our 16 bit and 32 bit linuxBIOS entry code +### +mainboardinit cpu/i386/entry16.inc +mainboardinit cpu/i386/entry32.inc +mainboardinit cpu/i386/bist32.inc +ldscript /cpu/i386/entry16.lds +ldscript /cpu/i386/entry32.lds +# +### +### Build our reset vector (This is where linuxBIOS is entered) +### +if USE_FALLBACK_IMAGE + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds +else + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds +end +# +#### Should this be in the northbridge code? +mainboardinit arch/i386/lib/cpu_reset.inc +# +### +### Include an id string (For safe flashing) +### +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds +# +#### +#### This is the early phase of linuxBIOS startup +#### Things are delicate and we test to see if we should +#### failover to another image. +#### +#option MAX_REBOOT_CNT=2 +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds +end +# +### +### Setup our mtrrs +### +mainboardinit cpu/k8/earlymtrr.inc +### +### Only the bootstrap cpu makes it here. +### Failover if we need to +### +# +if USE_FALLBACK_IMAGE + mainboardinit ./failover.inc +end + +# +# +### +### Setup the serial port +### +mainboardinit pc80/serial.inc +mainboardinit arch/i386/lib/console.inc +mainboardinit cpu/i386/bist32_fail.inc +# +#### +#### O.k. We aren't just an intermediary anymore! +#### +# +### +### Romcc output +### +#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E" +#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc" +#mainboardinit .failover.inc + +makerule ./failover.E + depends "$(MAINBOARD)/failover.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" +end + +makerule ./failover.inc + depends "./romcc ./failover.E" + action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end + +makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h" + action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" +end +makerule ./auto.inc + depends "./romcc ./auto.E" + action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" +# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" +end +mainboardinit cpu/k8/enable_mmx_sse.inc +mainboardinit ./auto.inc +mainboardinit cpu/k8/disable_mmx_sse.inc +# +### +### Include the secondary Configuration files +### +northbridge amd/amdk8 "mc0" + pci 0:18.0 + pci 0:18.0 + pci 0:18.0 + pci 0:18.1 + pci 0:18.2 + pci 0:18.3 + southbridge amd/amd8131 "amd8131" link 1 + pci 0:0.0 + pci 0:0.1 + pci 0:1.0 + pci 0:1.1 + end + southbridge amd/amd8111 "amd8111" link 1 + pci 0:0.0 + pci 0:1.0 on + pci 0:1.1 on + pci 0:1.2 on + pci 0:1.3 on + pci 0:1.5 off + pci 0:1.6 off + pci 1:0.0 on + pci 1:0.1 on + pci 1:0.2 on + pci 1:1.0 off + superio winbond/w83627hf link 1 + pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + pnp 2e.6 off # CIR + pnp 2e.7 off # GAME_MIDI_GIPO1 + pnp 2e.8 off # GPIO2 + pnp 2e.9 off # GPIO3 + pnp 2e.a off # ACPI + pnp 2e.b off # HW Monitor + end + end +end + +northbridge amd/amdk8 "mc1" + pci 0:19.0 + pci 0:19.0 + pci 0:19.0 + pci 0:19.1 + pci 0:19.2 + pci 0:19.3 +end + +northbridge amd/amdk8 "mc2" + pci 0:1a.0 + pci 0:1a.0 + pci 0:1a.0 + pci 0:1a.1 + pci 0:1a.2 + pci 0:1a.3 +end + + +northbridge amd/amdk8 "mc3" + pci 0:1b.0 + pci 0:1b.0 + pci 0:1b.0 + pci 0:1b.1 + pci 0:1b.2 + pci 0:1b.3 +end + + +dir /pc80 +#dir /bioscall + +cpu k8 "cpu0" + register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}" +end + +cpu k8 "cpu1" +end + +cpu k8 "cpu2" +end + +cpu k8 "cpu3" +end diff --git a/src/mainboard/tyan/s4882/VERSION b/src/mainboard/tyan/s4882/VERSION new file mode 100644 index 0000000000..cd5ac039d6 --- /dev/null +++ b/src/mainboard/tyan/s4882/VERSION @@ -0,0 +1 @@ +2.0 diff --git a/src/mainboard/tyan/s4882/auto.c b/src/mainboard/tyan/s4882/auto.c new file mode 100644 index 0000000000..bbf1df9927 --- /dev/null +++ b/src/mainboard/tyan/s4882/auto.c @@ -0,0 +1,277 @@ +#define ASSEMBLY 1 +#include +#include +#include +#include +#include +#include +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/k8/apic_timer.c" +#include "lib/delay.c" +#include "cpu/p6/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/cpu_rev.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + + +#define REV_B_RESET 0 +static void memreset_setup(void) +{ +#if REV_B_RESET==1 + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 +#else + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 +#endif + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + udelay(800); +#if REV_B_RESET==1 + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 +#endif + udelay(90); +} + +static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) +{ + /* Routing Table Node i + * + * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c + * i: 0, 1, 2, 3, 4, 5, 6, 7 + * + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [11: 8] Response Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [19:16] Broadcast route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + uint32_t ret=0x00010101; /* default row entry */ + + + static const unsigned int rows_4p[4][4] = { + { 0x000b0101, 0x00010202, 0x00030808, 0x00010208 }, + { 0x00010202, 0x00070101, 0x00010204, 0x00030404 }, + { 0x00030404, 0x00010204, 0x00070101, 0x00010202 }, + { 0x00010208, 0x00030808, 0x00010202, 0x000b0101 } + }; + + if (!(node>=maxnodes || row>=maxnodes)) { + ret=rows_4p[node][row]; + } + + return ret; +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_HUB 0x18 + unsigned device=(ctrl->channel0[0])>>8; + smbus_write_byte(SMBUS_HUB , 0x01, device); + smbus_write_byte(SMBUS_HUB , 0x03, 0); +} +#if 0 +static inline void change_i2c_mux(unsigned device) +{ +#define SMBUS_HUB 0x18 + smbus_write_byte(SMBUS_HUB , 0x01, device); + smbus_write_byte(SMBUS_HUB , 0x03, 0); +} +#endif + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/raminit.c" + +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +#include "resourcemap.c" /* tyan does not want the default */ + +#define FIRST_CPU 1 +#define SECOND_CPU 1 + +#define THIRD_CPU 1 +#define FOURTH_CPU 1 + +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU) + +#define RC0 ((1<<1)<<8) +#define RC1 ((1<<2)<<8) +#define RC2 ((1<<3)<<8) +#define RC3 ((1<<4)<<8) + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 + +static void main(void) +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 }, + .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 }, + .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 }, + + }, +#endif + +#if THIRD_CPU + { + .node_id = 2, + .f0 = PCI_DEV(0, 0x1a, 0), + .f1 = PCI_DEV(0, 0x1a, 1), + .f2 = PCI_DEV(0, 0x1a, 2), + .f3 = PCI_DEV(0, 0x1a, 3), + .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 }, + .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 }, + + }, +#endif +#if FOURTH_CPU + { + .node_id = 3, + .f0 = PCI_DEV(0, 0x1b, 0), + .f1 = PCI_DEV(0, 0x1b, 1), + .f2 = PCI_DEV(0, 0x1b, 2), + .f3 = PCI_DEV(0, 0x1b, 3), + .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 }, + .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 }, + + }, +#endif + }; + int i; + int needs_reset; + enable_lapic(); + init_timer(); + if (cpu_init_detected()) { + asm("jmp __cpu_reset"); + } + distinguish_cpu_resets(); + if (!boot_cpu()) { + stop_this_cpu(); + } + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + setup_s4882_resource_map(); + needs_reset = setup_coherent_ht_domain(); + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xa0); +#if 0 + dump_pci_device(PCI_DEV(0, 4, 0)); +#endif + if (needs_reset) { + print_info("ht reset -"); + soft_reset(); + } + +#if 0 + dump_pci_devices(); +#endif + enable_smbus(); +#if 0 + +// activate_spd_rom(&cpu[0]); +// dump_spd_registers(&cpu[0]); + +// for(i=0;i<4;i++) { +// activate_spd_rom(&cpu[i]); +// dump_smbus_registers(); +// } + for(i=1;i<256;i=i*2) { + change_i2c_mux(i); + dump_smbus_registers(); + } + +#endif + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 1)); +#endif + + /* Check all of memory */ +#if 0 + msr_t msr; + msr = rdmsr(TOP_MEM2); + print_debug("TOP_MEM2: "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\r\n"); +#endif +/* +#if 0 + ram_check(0x00000000, msr.lo+(msr.hi<<32)); +#else +#if TOTAL_CPUS < 2 + // Check 16MB of memory @ 0 + ram_check(0x00000000, 0x01000000); +#else + // Check 16MB of memory @ 2GB + ram_check(0x80000000, 0x81000000); +#endif +#endif +*/ +} diff --git a/src/mainboard/tyan/s4882/chip.h b/src/mainboard/tyan/s4882/chip.h new file mode 100644 index 0000000000..7eb925df36 --- /dev/null +++ b/src/mainboard/tyan/s4882/chip.h @@ -0,0 +1,6 @@ +extern struct chip_control mainboard_tyan_s4882_control; + +struct mainboard_tyan_s4882_config { + int fixup_scsi; +// int fixup_vga; +}; diff --git a/src/mainboard/tyan/s4882/cmos.layout b/src/mainboard/tyan/s4882/cmos.layout new file mode 100644 index 0000000000..247715e6ac --- /dev/null +++ b/src/mainboard/tyan/s4882/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/tyan/s4882/failover.c b/src/mainboard/tyan/s4882/failover.c new file mode 100644 index 0000000000..b22abfea06 --- /dev/null +++ b/src/mainboard/tyan/s4882/failover.c @@ -0,0 +1,80 @@ +#define ASSEMBLY 1 +#include +#include +#include +#include +#include +#include +#include "pc80/mc146818rtc_early.c" +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "cpu/p6/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#define HAVE_REGPARM_SUPPORT 0 +#if HAVE_REGPARM_SUPPORT +static unsigned long main(unsigned long bist) +{ +#else +static void main(void) +{ + unsigned long bist = 0; +#endif + /* Make cerain my local apic is useable */ + enable_lapic(); + + /* Is this a cpu only reset? */ + if (cpu_init_detected()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + /* Setup the 8111 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + asm("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: + asm("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: +#if HAVE_REGPARM_SUPPORT + return bist; +#else + return; +#endif +} diff --git a/src/mainboard/tyan/s4882/irq_tables.c b/src/mainboard/tyan/s4882/irq_tables.c new file mode 100644 index 0000000000..dd293ca966 --- /dev/null +++ b/src/mainboard/tyan/s4882/irq_tables.c @@ -0,0 +1,46 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*22, /* there can be total 22 devices on the bus */ + 1, /* Where the interrupt router lies (bus) */ + (4<<3)|3, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x7400, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x9a, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + {0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {1,(3<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x4,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, + {0x4,0x8, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x4,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, + {0x4,0x18, {{0x2, 0xdef8}, {0x1, 0xdef8}, {0x3, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x4,0x28, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x4,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {1,(4<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {1,(1<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x2,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x2, 0}, + {0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x3, 0}, + {0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x2,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {1,(2<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0}, + {0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0}, + {0x3,0x20, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, + {0x3,0x28, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0}, + {0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0,0xd0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0,0xd8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + } +}; diff --git a/src/mainboard/tyan/s4882/mainboard.c b/src/mainboard/tyan/s4882/mainboard.c new file mode 100644 index 0000000000..32e1a31fd2 --- /dev/null +++ b/src/mainboard/tyan/s4882/mainboard.c @@ -0,0 +1,192 @@ +#include +#include +#include +#include +#include +#include +#include "../../../northbridge/amd/amdk8/northbridge.h" +#include "chip.h" +//#include +//#include "lsi_scsi.c" +unsigned long initial_apicid[CONFIG_MAX_CPUS] = +{ + 0,1,2,3 +}; +#if 0 +static void fixup_lsi_53c1030(struct device *pdev) +{ +// uint8_t byte; + uint16_t word; + + byte = 1; + pci_write_config8(pdev, 0xff, byte); + // Set the device id +// pci_write_config_word(pdev, PCI_DEVICE_ID, PCI_DEVICE_ID_LSILOGIC_53C1030); + // Set the subsytem vendor id +// pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, PCI_VENDOR_ID_TYAN); + word = 0x10f1; + pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, word); + // Set the subsytem id + word = 0x4882; + pci_write_config16(pdev, PCI_SUBSYSTEM_ID, word); + // Disable writes to the device id + byte = 0; + pci_write_config8(pdev, 0xff, byte); + +// lsi_scsi_init(pdev); + +} +#endif +//extern static void lsi_scsi_init(struct device *dev); +#if 0 +static void print_pci_regs(struct device *dev) +{ + uint8_t byte; + int i; + + for(i=0;i<256;i++) { + byte = pci_read_config8(dev, i); + + if((i%16)==0) printk_debug("\n%02x:",i); + printk_debug(" %02x",byte); + } + printk_debug("\n"); + +// pci_write_config8(dev, 0x4, byte); + +} +#endif +#if 0 +static void print_mem(void) +{ + int i; + int low_1MB = 0; + for(i=low_1MB;ichip_info; + + switch (pass) { + default: break; +// case CONF_PASS_PRE_CONSOLE: +// case CONF_PASS_PRE_PCI: +// case CONF_PASS_POST_PCI: + case CONF_PASS_PRE_BOOT: +// if (conf->fixup_scsi) +// onboard_scsi_fixup(); +// if (conf->fixup_vga) +// vga_fixup(); + printk_debug("mainboard fixup pass %d done\r\n", + pass); + break; + } + +} +static struct device_operations mainboard_operations = { + .read_resources = root_dev_read_resources, + .set_resources = root_dev_set_resources, + .enable_resources = enable_childrens_resources, + .init = 0, + .scan_bus = amdk8_scan_root_bus, + .enable = 0, +}; + +static void enumerate(struct chip *chip) +{ + struct chip *child; + dev_root.ops = &mainboard_operations; + chip->dev = &dev_root; + chip->bus = 0; + for(child = chip->children; child; child = child->next) { + child->bus = &dev_root.link[0]; + } +} +struct chip_control mainboard_tyan_s4882_control = { + .enable = enable, + .enumerate = enumerate, + .name = "Tyan s4882 mainboard ", +}; + + diff --git a/src/mainboard/tyan/s4882/mptable.c b/src/mainboard/tyan/s4882/mptable.c new file mode 100644 index 0000000000..a95680e512 --- /dev/null +++ b/src/mainboard/tyan/s4882/mptable.c @@ -0,0 +1,198 @@ +#include +#include +#include +#include +#include + +void *smp_write_config_table(void *v, unsigned long * processor_map) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S48822 "; + struct mp_config_table *mc; + + unsigned char bus_num; + unsigned char bus_isa; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + unsigned char bus_8111_1; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc, processor_map); + + + { + device_t dev; + + /* 8111 */ + dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + + bus_8111_1 = 4; + bus_isa = 5; + } + /* 8131-1 */ + dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + + bus_8131_1 = 2; + } + /* 8131-2 */ + dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + + bus_8131_2 = 3; + } + } + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); + + +/*I/O APICs: APIC ID Version State Address*/ + smp_write_ioapic(mc, 4, 0x11, 0xfec00000); + { + struct pci_dev *dev; + uint32_t base; + dev = dev_find_slot(1, PCI_DEVFN(0x1,1)); + if (dev) { + base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); + base &= PCI_BASE_ADDRESS_MEM_MASK; + smp_write_ioapic(mc, 5, 0x11, base); + } + dev = dev_find_slot(1, PCI_DEVFN(0x2,1)); + if (dev) { + base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); + base &= PCI_BASE_ADDRESS_MEM_MASK; + smp_write_ioapic(mc, 6, 0x11, base); + } + } + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x4, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, 0x4, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x4, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, 0x4, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, 0x4, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, 0x4, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, 0x4, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, 0x4, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, 0x4, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x9, 0x4, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xa, 0x4, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xb, 0x4, 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, 0x4, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, 0x4, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, 0x4, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, 0x4, 0xf); + + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 1, (4<<2)|0, 0x4, 0x13); + + +//On Board AMD USB + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, 0x4, 0x13); + +//On Board Via USB 1.1 and 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|0, 0x4, 0x11); //1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|1, 0x4, 0x12); //1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|2, 0x4, 0x10); //2 + +//Slot 5 PCI 32 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|0, 0x4, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|1, 0x4, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|2, 0x4, 0x12); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|3, 0x4, 0x13); // + + +//On Board SI Serial ATA + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, 0x4, 0x13); +//On Board ATI Display Adapter + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, 0x4, 0x12); + + +//Slot 4 PCIX 100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, 0x5, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, 0x5, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, 0x5, 0x1);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, 0x5, 0x2);// + +//Slot 3 PCIX 100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, 0x5, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, 0x5, 0x3);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, 0x5, 0x0);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, 0x5, 0x1);// + +//On Board LSI scsi and NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|0, 0x5, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|1, 0x5, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, 0x5, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, 0x5, 0x1); + +//Slot 2 PCI-X 133/100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, 0x6, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, 0x6, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, 0x6, 0x2); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, 0x6, 0x3); // + +//Slot 1 PCI-X 133/100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|0, 0x6, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|1, 0x6, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|2, 0x6, 0x3);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|3, 0x6, 0x0);// + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v, processor_map); +} diff --git a/src/mainboard/tyan/s4882/resourcemap.c b/src/mainboard/tyan/s4882/resourcemap.c new file mode 100644 index 0000000000..423ac3cf00 --- /dev/null +++ b/src/mainboard/tyan/s4882/resourcemap.c @@ -0,0 +1,264 @@ +/* + * Tyan S4882 needs a different resource map + * + */ + +static void setup_s4882_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff10, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff010, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000103, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + int max; + max = sizeof(register_values)/sizeof(register_values[0]); + setup_resource_map(register_values, max); +} + -- cgit v1.2.3