From 11bf9df9ac73449d3291e927771abbbbcd4af145 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Thu, 5 Dec 2019 00:12:38 +0100 Subject: mb/gigabyte/ga-h61m-s2pv: Add ga-h61m-ds2v as a variant Took less than 30 minutes, and booted on the first try :) Working: - Native raminit, using two 2GB DDR3-1333 DIMMs - S3 suspend/resume - USB ports and headers - EHCI Debug with an FT2232H - Gigabit Ethernet - Integrated DVI/VGA outputs (libgfxinit) - PCIe x16 for a graphics card - PCIe x1 ports - PS/2 port with a keyboard - SATA controller - Audio outputs, both front and rear - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. Backup chip is untested. Untested: - VGA BIOS for integrated graphics init - Audio inputs - Non-Linux OSes - ACPI thermal zone and OS-independent fan control Not working: - Default IFD defines the BIOS region as the entire flash chip. Using 'flashrom --ifd -i bios' is asking for a failed flash! Change-Id: I467f586530e4a3b53a24b66565b5dcab5e33cf46 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/c/coreboot/+/37483 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber --- src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig | 7 +- src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig.name | 5 + .../variants/ga-h61m-ds2v/devicetree.cb | 96 ++++++++++ .../ga-h61m-s2pv/variants/ga-h61m-ds2v/gpio.c | 203 +++++++++++++++++++++ .../ga-h61m-s2pv/variants/ga-h61m-ds2v/hda_verb.c | 42 +++++ 5 files changed, 350 insertions(+), 3 deletions(-) create mode 100644 src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/devicetree.cb create mode 100644 src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/gpio.c create mode 100644 src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/hda_verb.c (limited to 'src') diff --git a/src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig b/src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig index 62c422aa53..18982c8675 100644 --- a/src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig +++ b/src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig @@ -13,7 +13,7 @@ ## GNU General Public License for more details. ## -if BOARD_GIGABYTE_GA_H61M_S2PV || BOARD_GIGABYTE_GA_H61MA_D3V +if BOARD_GIGABYTE_GA_H61M_S2PV || BOARD_GIGABYTE_GA_H61M_DS2V || BOARD_GIGABYTE_GA_H61MA_D3V config BOARD_SPECIFIC_OPTIONS def_bool y @@ -30,7 +30,6 @@ config BOARD_SPECIFIC_OPTIONS select INTEL_GMA_HAVE_VBT select HAVE_OPTION_TABLE select HAVE_CMOS_DEFAULT - select NO_UART_ON_SUPERIO if BOARD_GIGABYTE_GA_H61MA_D3V config MAINBOARD_DIR string @@ -39,11 +38,13 @@ config MAINBOARD_DIR config VARIANT_DIR string default "ga-h61m-s2pv" if BOARD_GIGABYTE_GA_H61M_S2PV + default "ga-h61m-ds2v" if BOARD_GIGABYTE_GA_H61M_DS2V default "ga-h61ma-d3v" if BOARD_GIGABYTE_GA_H61MA_D3V config MAINBOARD_PART_NUMBER string default "GA-H61M-S2PV" if BOARD_GIGABYTE_GA_H61M_S2PV + default "GA-H61M-DS2V" if BOARD_GIGABYTE_GA_H61M_DS2V default "GA-H61MA-D3V" if BOARD_GIGABYTE_GA_H61MA_D3V config DEVICETREE @@ -62,4 +63,4 @@ config USBDEBUG_HCD_INDEX # Bottom left port seen from rear int default 2 -endif # BOARD_GIGABYTE_GA_H61M_S2PV || BOARD_GIGABYTE_GA_H61MA_D3V +endif # BOARD_GIGABYTE_GA_H61M* diff --git a/src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig.name b/src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig.name index 83b5803d5f..15d107d8e5 100644 --- a/src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig.name +++ b/src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig.name @@ -1,5 +1,10 @@ config BOARD_GIGABYTE_GA_H61M_S2PV bool "GA-H61M-S2PV" +config BOARD_GIGABYTE_GA_H61M_DS2V + bool "GA-H61M-DS2V" + select NO_UART_ON_SUPERIO + config BOARD_GIGABYTE_GA_H61MA_D3V bool "GA-H61MA-D3V" + select NO_UART_ON_SUPERIO diff --git a/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/devicetree.cb b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/devicetree.cb new file mode 100644 index 0000000000..2cc5b19651 --- /dev/null +++ b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/devicetree.cb @@ -0,0 +1,96 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2019 Angel Pons +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip northbridge/intel/sandybridge + device cpu_cluster 0 on + chip cpu/intel/model_206ax + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0 on end + device lapic 0xacac off end + end + end + register "pci_mmio_size" = "2048" + device domain 0 on + subsystemid 0x1458 0x5000 inherit + device pci 00.0 on end # Host bridge + device pci 01.0 on end # PEG + device pci 02.0 on end # iGPU + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "gen1_dec" = "0x003c0a01" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x33" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + + device pci 16.0 on end # MEI #1 + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # HD Audio + + device pci 1c.0 on end # RP #1: PCIe x1 Port (PCIEX1_3) + device pci 1c.1 on end # RP #2: PCIe x1 Port (PCIEX1_1) + device pci 1c.2 off end # RP #3: + device pci 1c.3 off end # RP #4: + device pci 1c.4 on end # RP #4: Realtek RTL8111F GbE NIC + device pci 1c.5 on end # RP #5: PCIe x1 Port (PCIEX1_2) + + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + chip superio/ite/it8728f + device pnp 2e.0 off end # Floppy + device pnp 2e.1 off end # COM1 + device pnp 2e.2 off end # COM2 + device pnp 2e.3 off end # Parallel port + device pnp 2e.4 on # Environment Controller + io 0x60 = 0x0a30 + io 0x62 = 0x0a20 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + end + device pnp 2e.6 on end # Mouse + device pnp 2e.7 on # GPIO + irq 0x25 = 0x40 + irq 0x26 = 0xf7 + irq 0x27 = 0x10 + irq 0x2c = 0x80 + io 0x60 = 0x0000 + io 0x62 = 0x0a00 + io 0x64 = 0x0000 + irq 0x73 = 0x00 + irq 0xc1 = 0x37 + irq 0xcb = 0x00 + irq 0xf0 = 0x10 + irq 0xf1 = 0x42 + irq 0xf6 = 0x1c + end + device pnp 2e.a off end # CIR + end + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/gpio.c b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/gpio.c new file mode 100644 index 0000000000..89bc4d6a86 --- /dev/null +++ b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/gpio.c @@ -0,0 +1,203 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Angel Pons + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_INPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/hda_verb.c b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/hda_verb.c new file mode 100644 index 0000000000..1379b1ac94 --- /dev/null +++ b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-ds2v/hda_verb.c @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Angel Pons + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +const u32 cim_verb_data[] = { + 0x10ec0887, /* Realtek ALC887 */ + 0x1458a002, /* Subsystem ID */ + 15, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(2, 0x1458a002), + AZALIA_PIN_CFG(2, 0x11, 0x411111f0), + AZALIA_PIN_CFG(2, 0x12, 0x411111f0), + AZALIA_PIN_CFG(2, 0x14, 0x01014410), + AZALIA_PIN_CFG(2, 0x15, 0x411111f0), + AZALIA_PIN_CFG(2, 0x16, 0x411111f0), + AZALIA_PIN_CFG(2, 0x17, 0x411111f0), + AZALIA_PIN_CFG(2, 0x18, 0x01a19c50), + AZALIA_PIN_CFG(2, 0x19, 0x02a19c60), + AZALIA_PIN_CFG(2, 0x1a, 0x0181345f), + AZALIA_PIN_CFG(2, 0x1b, 0x02214c20), + AZALIA_PIN_CFG(2, 0x1c, 0x411111f0), + AZALIA_PIN_CFG(2, 0x1d, 0x4004c601), + AZALIA_PIN_CFG(2, 0x1e, 0x411111f0), + AZALIA_PIN_CFG(2, 0x1f, 0x411111f0), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; -- cgit v1.2.3