From 270881af741eaeae29a084bad351c7182bfde275 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Wed, 15 May 2013 15:05:38 -0700 Subject: slippy: Put SerialIO devices in PCI mode The device at function 0 also needs to be enabled or the kernel will ignore all other functions. 00:15.0 DMA controller: Intel Corporation Lynx Point-LP Low Power Sub-System DMA (rev 03) 00:15.1 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #0 (rev 03) 00:15.2 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #1 (rev 03) Change-Id: I0e1bc7bb719756496c46664d66dc1b1cf2f4d1ba Signed-off-by: Duncan Laurie Reviewed-on: https://gerrit.chromium.org/gerrit/51370 Reviewed-by: Aaron Durbin Reviewed-on: http://review.coreboot.org/4171 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc --- src/mainboard/google/slippy/devicetree.cb | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src') diff --git a/src/mainboard/google/slippy/devicetree.cb b/src/mainboard/google/slippy/devicetree.cb index 665e6dcecc..143147fd6d 100644 --- a/src/mainboard/google/slippy/devicetree.cb +++ b/src/mainboard/google/slippy/devicetree.cb @@ -56,13 +56,13 @@ chip northbridge/intel/haswell register "sata_ahci" = "0x1" register "sata_port_map" = "0x1" - register "sio_acpi_mode" = "1" + register "sio_acpi_mode" = "0" register "sio_i2c0_voltage" = "0" # 3.3V register "sio_i2c1_voltage" = "0" # 3.3V device pci 13.0 off end # Smart Sound Audio DSP device pci 14.0 on end # USB3 XHCI - device pci 15.0 off end # Serial I/O DMA + device pci 15.0 on end # Serial I/O DMA device pci 15.1 on end # I2C0 device pci 15.2 on end # I2C1 device pci 15.3 off end # GSPI0 -- cgit v1.2.3