From 629abbe7515cf9cd3b50d689c2fce3385805fc0d Mon Sep 17 00:00:00 2001 From: Eric Lai Date: Tue, 17 Dec 2019 15:35:06 +0800 Subject: mb/google/drallion: Remove Wilco 1.0 CML code from drallion code Drallion supports D3 hot not D3 cold. Remove the code which used for Wilco 1.0 CML. BUG=b:140068267 TEST=boot into OS without any issues BRANCH=none Signed-off-by: Eric Lai Change-Id: Ifc83fae7ac462d3e6595742d96952c2a2607c88b Reviewed-on: https://review.coreboot.org/c/coreboot/+/37779 Tested-by: build bot (Jenkins) Reviewed-by: Mathew King Reviewed-by: Mike Wiitala --- src/mainboard/google/drallion/ramstage.c | 11 ----------- src/mainboard/google/drallion/variants/drallion/gpio.c | 10 ++++------ 2 files changed, 4 insertions(+), 17 deletions(-) (limited to 'src') diff --git a/src/mainboard/google/drallion/ramstage.c b/src/mainboard/google/drallion/ramstage.c index 6d3ebb46cb..385504522f 100644 --- a/src/mainboard/google/drallion/ramstage.c +++ b/src/mainboard/google/drallion/ramstage.c @@ -59,13 +59,6 @@ void smbios_fill_dimm_locator(const struct dimm_info *dimm, } } -static const struct pad_config gpio_unused[] = { -/* SUSWARN# */ PAD_NC(GPP_A13, NONE), -/* SUSACK# */ PAD_NC(GPP_A15, NONE), -/* M2_SKT2_CFG0 */ PAD_NC(GPP_H12, NONE), -/* M2_SKT2_CFG1 */ PAD_NC(GPP_H13, NONE), -}; - static void mainboard_init(void *chip_info) { const struct pad_config *gpio_table; @@ -73,10 +66,6 @@ static void mainboard_init(void *chip_info) gpio_table = variant_gpio_table(&num_gpios); cnl_configure_pads(gpio_table, num_gpios); - - /* Disable unused pads for devices with board ID > 2 */ - if (board_id() > 2) - gpio_configure_pads(gpio_unused, ARRAY_SIZE(gpio_unused)); } static void mainboard_enable(struct device *dev) diff --git a/src/mainboard/google/drallion/variants/drallion/gpio.c b/src/mainboard/google/drallion/variants/drallion/gpio.c index 086dca0265..f2b70792f7 100644 --- a/src/mainboard/google/drallion/variants/drallion/gpio.c +++ b/src/mainboard/google/drallion/variants/drallion/gpio.c @@ -36,9 +36,9 @@ static const struct pad_config gpio_table[] = { /* PME# */ PAD_NC(GPP_A11, NONE), /* ISH_LID_CL#_TAB */ /* ISH_GP6 */ PAD_CFG_NF(GPP_A12, NONE, DEEP, NF2), -/* SUSWARN# */ PAD_CFG_GPO(GPP_A13, 0, DEEP), +/* SUSWARN# */ PAD_NC(GPP_A13, NONE), /* ESPI_RESET# */ -/* SUSACK# */ PAD_CFG_GPO(GPP_A15, 0, DEEP), +/* SUSACK# */ PAD_NC(GPP_A15, NONE), /* SD_1P8_SEL */ PAD_CFG_GPI(GPP_A16, NONE, PLTRST), /* 2.7MM_CAM_DET# */ /* SD_PWR_EN# */ PAD_NC(GPP_A17, NONE), /* ISH_ACC1_INT# */ @@ -200,6 +200,8 @@ static const struct pad_config gpio_table[] = { /* I2C4_SCL */ PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1), /* I2C5_SDA */ PAD_NC(GPP_H10, NONE), /* ISH_I2C2_SDA */ /* I2C5_SCL */ PAD_NC(GPP_H11, NONE), /* ISH_I2C2_SCL */ +/* M2_SKT2_CFG0 */ PAD_NC(GPP_H12, NONE), +/* M2_SKT2_CFG1 */ PAD_NC(GPP_H13, NONE), /* M2_SKT2_CFG2 */ PAD_NC(GPP_H14, NONE), /* M2_SKT2_CFG3 */ PAD_CFG_GPO(GPP_H15, 1, DEEP), /* BT_RADIO_DIS# */ /* DDPF_CTRLCLK */ PAD_NC(GPP_H16, NONE), @@ -226,9 +228,6 @@ static const struct pad_config gpio_table[] = { /* Early pad configuration in bootblock */ static const struct pad_config early_gpio_table[] = { -/* M2_SKT2_CFG1 */ PAD_CFG_GPO(GPP_H13, 1, DEEP), /* M.2 SSD D3 cold */ -/* SSD RESET pin will stay low first */ -/* M2_SKT2_CFG0 */ PAD_CFG_GPO(GPP_H12, 0, DEEP), /* D3 cold RST */ /* UART2_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* SERVOTX_UART */ /* UART2_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* SERVORX_UART */ /* I2C4_SDA */ PAD_CFG_NF(GPP_H8, NONE, DEEP, NF1), /* SDA_PCH_H1 */ @@ -240,7 +239,6 @@ static const struct pad_config early_gpio_table[] = { /* CPU_GP0 */ PAD_CFG_GPI(GPP_E3, NONE, DEEP), /* MEM_INTERLEAVED */ /* SATALED# */ PAD_CFG_GPI(GPP_E8, NONE, DEEP), /* RECOVERY# */ /* DDPD_HPD2 */ PAD_CFG_GPI(GPP_E15, NONE, DEEP), /* PCH_WP */ -/* M2_SKT2_CFG0 */ PAD_CFG_GPO(GPP_H12, 1, DEEP), /* D3 cold RST */ /* GPP_F1 */ PAD_CFG_GPI(GPP_F1, NONE, DEEP), /* DDR_CHA_EN_1P8 */ /* GPP_F2 */ PAD_CFG_GPI(GPP_F2, NONE, DEEP), /* DDR_CHB_EN_1P8 */ /* EMMC_DATA0 */ PAD_CFG_GPI(GPP_F12, NONE, DEEP), /* MEM_CONFIGO_1P8 */ -- cgit v1.2.3