From 9683b1deb2b4489247418c477eb6a5ad59fa0bd1 Mon Sep 17 00:00:00 2001 From: Xavi Drudis Ferran Date: Sun, 27 Feb 2011 23:47:57 +0000 Subject: Prepare for next patches (Improving BKDG implementation of P-states, CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart F3xA0, Power Control Misc Register to its own function. Signed-off-by: Xavi Drudis Ferran Acked-by: Marc Jones git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/amd/model_10xxx/fidvid.c | 56 +++++++++++++++++++++------------------- 1 file changed, 30 insertions(+), 26 deletions(-) (limited to 'src') diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index def07660eb..60df8b55ce 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -231,9 +231,36 @@ static void config_clk_power_ctrl_reg0(int node) { } } +static void config_power_ctrl_misc_reg(device_t dev) { + /* check PVI/SVI */ + u32 dword = pci_read_config32(dev, 0xA0); + if (dword & PVI_MODE) { /* PVI */ + /* set slamVidMode to 0 for PVI */ + dword &= VID_SLAM_OFF | PLLLOCK_OFF; + dword |= PLLLOCK_DFT_L; + pci_write_config32(dev, 0xA0, dword); + } else { /* SVI */ + /* set slamVidMode to 1 for SVI */ + dword &= PLLLOCK_OFF; + dword |= PLLLOCK_DFT_L | VID_SLAM_ON; + pci_write_config32(dev, 0xA0, dword); + + u32 dtemp = dword; + + /* Program F3xD8[PwrPlanes] according F3xA0[DulaVdd] */ + dword = pci_read_config32(dev, 0xD8); + + if (dtemp & DUAL_VDD_BIT) + dword |= PWR_PLN_ON; + else + dword &= PWR_PLN_OFF; + pci_write_config32(dev, 0xD8, dword); + } +} + static void prep_fid_change(void) { - u32 dword, dtemp; + u32 dword; u32 nodes; device_t dev; int i; @@ -253,31 +280,8 @@ static void prep_fid_change(void) config_clk_power_ctrl_reg0(i); - /* check PVI/SVI */ - dword = pci_read_config32(dev, 0xA0); - if (dword & PVI_MODE) { /* PVI */ - /* set slamVidMode to 0 for PVI */ - dword &= VID_SLAM_OFF | PLLLOCK_OFF; - dword |= PLLLOCK_DFT_L; - pci_write_config32(dev, 0xA0, dword); - } else { /* SVI */ - /* set slamVidMode to 1 for SVI */ - dword &= PLLLOCK_OFF; - dword |= PLLLOCK_DFT_L | VID_SLAM_ON; - pci_write_config32(dev, 0xA0, dword); - - dtemp = dword; - - /* Program F3xD8[PwrPlanes] according F3xA0[DulaVdd] */ - dword = pci_read_config32(dev, 0xD8); - - if (dtemp & DUAL_VDD_BIT) - dword |= PWR_PLN_ON; - else - dword &= PWR_PLN_OFF; - pci_write_config32(dev, 0xD8, dword); - } - + config_power_ctrl_misc_reg(dev); + /* Note the following settings are additional from the ported * function setFidVidRegs() */ -- cgit v1.2.3