From a20e9832362db1b2031d62df05620d1ae03f18fc Mon Sep 17 00:00:00 2001 From: Aaron Durbin Date: Fri, 11 Nov 2016 17:28:35 -0600 Subject: mainboard/google/reef: set i2c bus timings by rise/fall times Provide the rise and fall times for the i2c buses and let the library perform the necessary calculations for the i2c controller registers instead of manually tuning the values. BUG=chrome-os-partner:58889,chrome-os-partner:59565 Change-Id: I0c84658471d90309cdbb850e3128ae01780633af Signed-off-by: Aaron Durbin Reviewed-on: https://review.coreboot.org/17397 Reviewed-by: Furquan Shaikh Tested-by: build bot (Jenkins) --- .../google/reef/variants/baseboard/devicetree.cb | 45 +++++++++++----------- 1 file changed, 23 insertions(+), 22 deletions(-) (limited to 'src') diff --git a/src/mainboard/google/reef/variants/baseboard/devicetree.cb b/src/mainboard/google/reef/variants/baseboard/devicetree.cb index 278cc576b7..263255f328 100644 --- a/src/mainboard/google/reef/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/reef/variants/baseboard/devicetree.cb @@ -71,39 +71,40 @@ chip soc/intel/apollolake register "gpe0_dw2" = "PMC_GPE_N_63_32" register "gpe0_dw3" = "PMC_GPE_SW_31_0" - # Enable I2C2 bus early for TPM access and configure as 400kHz - # with manually tuned values. + # Enable I2C0 for audio codec at 400kHz + register "i2c[0]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }" + + # Enable I2C2 bus early for TPM at 400kHz register "i2c[2]" = "{ .early_init = 1, .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 0xd0, - .scl_hcnt = 0x68, - .sda_hold = 0x27, - } + .rise_time_ns = 57, + .fall_time_ns = 28, + }" + + # touchscreen at 400kHz + register "i2c[3]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 76, + .fall_time_ns = 164, }" - # Limit trackpad speed to 400kHz with manually tuned values. + # trackpad at 400kHz register "i2c[4]" = "{ .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 0xd0, - .scl_hcnt = 0x68, - .sda_hold = 0x27, - } + .rise_time_ns = 114, + .fall_time_ns = 164, }" - # Limit digitizer speed to 400kHz with manually tuned values. + # digitizer at 400kHz register "i2c[5]" = "{ .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 0xd0, - .scl_hcnt = 0x68, - .sda_hold = 0x27, - } + .rise_time_ns = 152, + .fall_time_ns = 30, }" # Minimum SLP S3 assertion width 28ms. -- cgit v1.2.3