From fcb2a311c765b9e1d519ed5fa2263d1bd5b33656 Mon Sep 17 00:00:00 2001 From: Aaron Lwe Date: Mon, 19 May 2008 12:17:43 +0000 Subject: Add support for the VIA EPIA-CN baord, which uses C7 + CN700 + VT8237R. This also contains various improvements of the CN700 code in svn. Signed-off-by: Aaron Lwe Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3334 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/via/epia-cn/Config.lb | 142 ++++++++++ src/mainboard/via/epia-cn/Options.lb | 108 ++++++++ src/mainboard/via/epia-cn/auto.c | 131 +++++++++ src/mainboard/via/epia-cn/chip.h | 26 ++ src/mainboard/via/epia-cn/cmos.layout | 74 +++++ src/mainboard/via/epia-cn/irq_tables.c | 54 ++++ src/mainboard/via/epia-cn/mainboard.c | 27 ++ src/northbridge/via/cn700/northbridge.c | 69 ++++- src/northbridge/via/cn700/raminit.c | 463 +++++++++++++++++++------------- 9 files changed, 895 insertions(+), 199 deletions(-) create mode 100644 src/mainboard/via/epia-cn/Config.lb create mode 100644 src/mainboard/via/epia-cn/Options.lb create mode 100644 src/mainboard/via/epia-cn/auto.c create mode 100644 src/mainboard/via/epia-cn/chip.h create mode 100644 src/mainboard/via/epia-cn/cmos.layout create mode 100644 src/mainboard/via/epia-cn/irq_tables.c create mode 100644 src/mainboard/via/epia-cn/mainboard.c (limited to 'src') diff --git a/src/mainboard/via/epia-cn/Config.lb b/src/mainboard/via/epia-cn/Config.lb new file mode 100644 index 0000000000..52eb18492f --- /dev/null +++ b/src/mainboard/via/epia-cn/Config.lb @@ -0,0 +1,142 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 VIA Technologies, Inc. +## (Written by Aaron Lwe for VIA) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE) +else + default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) + default ROM_SECTION_OFFSET = 0 +end +default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE) +default XIP_ROM_SIZE = 64 * 1024 +default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) +arch i386 end +driver mainboard.o +if HAVE_PIRQ_TABLE object irq_tables.o end +if HAVE_MP_TABLE object mptable.o end +if HAVE_ACPI_TABLES + object fadt.o + object dsdt.o + object acpi_tables.o +end +makerule ./failover.E + depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" +end +makerule ./failover.inc + depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" +end +makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +end +makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +end +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end +mainboardinit arch/i386/lib/cpu_reset.inc +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit ./auto.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc +dir /pc80 +config chip.h + +chip northbridge/via/cn700 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # IDE + register "fn_ctrl_lo" = "0x8a" + register "fn_ctrl_hi" = "0x9d" + device pci 10.0 on end # USB 1.1 + device pci 10.1 on end # USB 1.1 + device pci 10.2 on end # USB 1.1 + device pci 10.3 on end # USB 1.1 + device pci 11.0 on # Southbridge LPC + chip superio/via/vt1211 # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c7 # VIA C7 + device apic 0 on end # APIC + end + end +end diff --git a/src/mainboard/via/epia-cn/Options.lb b/src/mainboard/via/epia-cn/Options.lb new file mode 100644 index 0000000000..fee1920a6c --- /dev/null +++ b/src/mainboard/via/epia-cn/Options.lb @@ -0,0 +1,108 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 VIA Technologies, Inc. +## (Written by Aaron Lwe for VIA) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses HAVE_OPTION_TABLE +uses USE_OPTION_TABLE +uses CONFIG_ROM_PAYLOAD +uses IRQ_SLOT_COUNT +uses MAINBOARD +uses MAINBOARD_VENDOR +uses MAINBOARD_PART_NUMBER +uses COREBOOT_EXTRA_VERSION +uses ARCH +uses FALLBACK_SIZE +uses STACK_SIZE +uses HEAP_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD_START +uses CONFIG_COMPRESSED_PAYLOAD_NRV2B +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses PAYLOAD_SIZE +uses _ROMBASE +uses _RAMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses HAVE_MP_TABLE +uses HAVE_ACPI_TABLES +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_CONSOLE_SERIAL8250 +uses CONFIG_UDELAY_TSC +uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 +uses CONFIG_PCI_ROM_RUN +uses CONFIG_CONSOLE_VGA +uses CONFIG_MAX_PCI_BUSES +uses TTYS0_BAUD +uses CONFIG_CHIP_NAME +uses CONFIG_VIDEO_MB +uses CONFIG_IOAPIC + +default ROM_SIZE = 512 * 1024 +default CONFIG_IOAPIC = 0 +default CONFIG_VIDEO_MB = 32 +default CONFIG_CONSOLE_SERIAL8250 = 1 +default CONFIG_PCI_ROM_RUN = 0 +default CONFIG_CONSOLE_VGA = 0 +default CONFIG_CHIP_NAME = 1 +default HAVE_FALLBACK_BOOT = 1 +default HAVE_MP_TABLE = 0 +default CONFIG_UDELAY_TSC = 1 +default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 +default HAVE_HARD_RESET = 0 +default HAVE_PIRQ_TABLE = 1 +default IRQ_SLOT_COUNT = 10 +default HAVE_ACPI_TABLES = 0 +default HAVE_OPTION_TABLE = 1 +default ROM_IMAGE_SIZE = 64 * 1024 +default FALLBACK_SIZE = ROM_SIZE +default USE_FALLBACK_IMAGE = 1 +default STACK_SIZE = 8 * 1024 +default HEAP_SIZE = 16 * 1024 +#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default USE_OPTION_TABLE = 0 +default _RAMBASE = 0x00004000 +default CONFIG_ROM_PAYLOAD = 1 +default CROSS_COMPILE = "" +default CC = "$(CROSS_COMPILE)gcc -m32" +default HOSTCC = "gcc" + +## +## Set this to the max PCI bus number you would ever use for PCI config I/O. +## Setting this number very high will make pci_locate_device() take a long +## time when it can't find a device. +## +default CONFIG_MAX_PCI_BUSES = 3 + +end + diff --git a/src/mainboard/via/epia-cn/auto.c b/src/mainboard/via/epia-cn/auto.c new file mode 100644 index 0000000000..592547b18a --- /dev/null +++ b/src/mainboard/via/epia-cn/auto.c @@ -0,0 +1,131 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 + +#include +#include +#include +#include +#include +#include +#include +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/via/cn700/raminit.h" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "southbridge/via/vt8237r/vt8237r_early_smbus.c" +#include "southbridge/via/vt8235/vt8235_early_serial.c" + +static void memreset_setup(void) +{ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/via/cn700/raminit.c" + +static void enable_mainboard_devices(void) +{ + device_t dev; + u8 reg; + + /* + * If I enable SATA, FILO will not find the IDE disk, so I'll disable + * SATA here. To not conflict with PCI spec, I'll move IDE device + * from 00:0f.1 to 00:0f.0. + */ + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT6420_SATA), 0); + if (dev != PCI_DEV_INVALID) { + /* Enable PATA. */ + reg = pci_read_config8(dev, 0xd1); + reg |= 0x08; + pci_write_config8(dev, 0xd1, reg); + reg = pci_read_config8(dev, 0x49); + reg |= 0x80; + pci_write_config8(dev, 0x49, reg); + } else { + print_debug("No SATA device\r\n"); + } + + /* Disable SATA, and PATA device will be 00:0f.0. */ + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); + if (dev == PCI_DEV_INVALID) + die("Southbridge not found!!!\r\n"); + reg = pci_read_config8(dev, 0x50); + reg |= 0x08; + pci_write_config8(dev, 0x50, reg); +} + +static const struct mem_controller ctrl = { + .d0f0 = 0x0000, + .d0f2 = 0x2000, + .d0f3 = 0x3000, + .d0f4 = 0x4000, + .d0f7 = 0x7000, + .d1f0 = 0x8000, + .channel0 = { 0x50 }, +}; + +static void main(unsigned long bist) +{ + unsigned long x; + device_t dev; + + /* Enable multifunction for northbridge. */ + pci_write_config8(ctrl.d0f0, 0x4f, 0x01); + + enable_vt8235_serial(); + uart_init(); + console_init(); + + print_spew("In auto.c:main()\r\n"); + + enable_smbus(); + smbus_fixup(&ctrl); + + if (bist == 0) { + print_debug("doing early_mtrr\r\n"); + early_mtrr_init(); + } + + /* Halt if there was a built-in self test failure. */ + report_bist_failure(bist); + + print_debug("Enabling mainboard devices\r\n"); + enable_mainboard_devices(); + + ddr_ram_setup(&ctrl); + + /* ram_check(0, 640 * 1024); */ + + print_spew("Leaving auto.c:main()\r\n"); +} diff --git a/src/mainboard/via/epia-cn/chip.h b/src/mainboard/via/epia-cn/chip.h new file mode 100644 index 0000000000..ff91a02b98 --- /dev/null +++ b/src/mainboard/via/epia-cn/chip.h @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_via_epia_cn_ops; + +struct mainboard_via_epia_cn_config { + int nothing; +}; diff --git a/src/mainboard/via/epia-cn/cmos.layout b/src/mainboard/via/epia-cn/cmos.layout new file mode 100644 index 0000000000..5ba4c032c1 --- /dev/null +++ b/src/mainboard/via/epia-cn/cmos.layout @@ -0,0 +1,74 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 + + diff --git a/src/mainboard/via/epia-cn/irq_tables.c b/src/mainboard/via/epia-cn/irq_tables.c new file mode 100644 index 0000000000..fef553e219 --- /dev/null +++ b/src/mainboard/via/epia-cn/irq_tables.c @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x11 << 3) | 0x0, /* Interrupt router device */ + 0x828, /* IRQs devoted exclusively to PCI usage */ + 0x1106, /* Vendor */ + 0x596, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x3e, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x08<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x1, 0x0}, + {0x00,(0x09<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0x0def8}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x3, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0x0def8}}, 0x4, 0x0}, + {0x00,(0x0c<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x5, 0x0}, + {0x00,(0x11<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, + {0x00,(0x10<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, + {0x00,(0x12<<3)|0x0, {{0x01, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} diff --git a/src/mainboard/via/epia-cn/mainboard.c b/src/mainboard/via/epia-cn/mainboard.c new file mode 100644 index 0000000000..e1eac58a62 --- /dev/null +++ b/src/mainboard/via/epia-cn/mainboard.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include "chip.h" + +struct chip_operations mainboard_via_epia_cn_ops = { + CHIP_NAME("VIA EPIA-CN Mainboard") +}; diff --git a/src/northbridge/via/cn700/northbridge.c b/src/northbridge/via/cn700/northbridge.c index 642661f308..3f4fe373d7 100644 --- a/src/northbridge/via/cn700/northbridge.c +++ b/src/northbridge/via/cn700/northbridge.c @@ -1,6 +1,8 @@ /* * This file is part of the coreboot project. * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe for VIA) * Copyright (C) 2007 Corey Osgood * * This program is free software; you can redistribute it and/or modify @@ -34,9 +36,11 @@ static void memctrl_init(device_t dev) { + device_t vlink_dev; u16 reg16; - - pci_write_config8(dev, 0x86, 0x2d); + u8 ranks; + u8 pagec, paged, pagee, pagef; + u8 shadowreg; /* Set up the vga framebuffer size */ reg16 = (log2(CONFIG_VIDEO_MB) << 12) | (1 << 15); @@ -45,8 +49,41 @@ static void memctrl_init(device_t dev) /* Set up VGA timers */ pci_write_config8(dev, 0xa2, 0x44); - pci_write_config16(dev, 0xb0, 0xaa60); + for (ranks = 0x4b; ranks >= 0x48; ranks--) { + if (pci_read_config8(dev, ranks)) { + ranks -= 0x48; + break; + } + } + if (ranks == 0x47) + ranks = 0x00; + reg16 = 0xaae0; + reg16 |= ranks; + /* GMINT Misc. FrameBuffer rank */ + pci_write_config16(dev, 0xb0, reg16); + /* AGPCINT Misc. */ pci_write_config8(dev, 0xb8, 0x08); + + /* shadown ram */ + pagec = 0xff, paged = 0xff, pagee = 0xff, pagef = 0x30; + /* PAGE C, D, E are all read write enable */ + pci_write_config8(dev, 0x80, pagec); + pci_write_config8(dev, 0x81, paged); + pci_write_config8(dev, 0x82, pagee); + /* PAGE F are read/writable */ + shadowreg = pci_read_config8(dev, 0x83); + shadowreg |= pagef; + pci_write_config8(dev, 0x83, shadowreg); + /* vlink mirror */ + vlink_dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CN700_VLINK, 0); + if (vlink_dev) { + pci_write_config8(vlink_dev, 0x61, pagec); + pci_write_config8(vlink_dev, 0x62, paged); + pci_write_config8(vlink_dev, 0x64, pagee); + shadowreg = pci_read_config8(vlink_dev, 0x63); + shadowreg |= pagef; + pci_write_config8(vlink_dev, 0x63, shadowreg); + } } static const struct device_operations memctrl_operations = { @@ -124,7 +161,10 @@ static u32 find_pci_tolm(struct bus *bus) static void pci_domain_set_resources(device_t dev) { - static const u8 ramregs[] = {0x40, 0x41, 0x42, 0x43}; + /* + * the order is important to find the correct ram size. + */ + static const u8 ramregs[] = {0x43, 0x42, 0x41, 0x40}; device_t mc_dev; u32 pci_tolm; @@ -133,19 +173,25 @@ static void pci_domain_set_resources(device_t dev) pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CN700_MEMCTRL, 0); - + if (mc_dev) { unsigned long tomk, tolmk; unsigned char rambits; int i, idx; + /* + * once the register value is not zero, the ramsize is + * this register's value multiply 64 * 1024 * 1024 + */ for(rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) { unsigned char reg; - reg = pci_read_config8(mc_dev, ramregs[i]); - rambits += reg; + rambits = pci_read_config8(mc_dev, ramregs[i]); + if (rambits != 0) + break; } - tomk = rambits; + tomk = rambits * 64 * 1024; + printk_spew("tomk is 0x%x\n", tomk); /* Compute the Top Of Low Memory, in Kb */ tolmk = pci_tolm >> 10; if (tolmk >= tomk) { @@ -156,16 +202,15 @@ static void pci_domain_set_resources(device_t dev) idx = 10; /* TODO: Hole needed? */ ram_resource(dev, idx++, 0, 640); /* first 640k */ - /* Leave a hole for vga */ - ram_resource(dev, idx++, 768, (tolmk - 768 - - (CONFIG_VIDEO_MB * 1024))); + /* Leave a hole for vga, 0xa0000 - 0xc0000 */ + ram_resource(dev, idx++, 768, (tolmk - 768 - CONFIG_VIDEO_MB * 1024)); } assign_resources(&dev->link[0]); } static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) { - printk_spew("Entering cn700 pci_domain_scan_bus.\n"); + printk_debug("Entering cn700 pci_domain_scan_bus.\n"); max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max); return max; diff --git a/src/northbridge/via/cn700/raminit.c b/src/northbridge/via/cn700/raminit.c index a9efd4e4d3..3a70e37440 100644 --- a/src/northbridge/via/cn700/raminit.c +++ b/src/northbridge/via/cn700/raminit.c @@ -1,6 +1,8 @@ /* * This file is part of the coreboot project. * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe for VIA) * Copyright (C) 2007 Corey Osgood * * This program is free software; you can redistribute it and/or modify @@ -39,7 +41,7 @@ #define DUMPNORTH() #endif -static void do_ram_command(device_t dev, u8 command, u32 addr_offset) +static void do_ram_command(device_t dev, u8 command) { u8 reg; @@ -55,11 +57,8 @@ static void do_ram_command(device_t dev, u8 command, u32 addr_offset) PRINT_DEBUG_MEM(" to 0x"); PRINT_DEBUG_MEM_HEX32(0 + addr_offset); PRINT_DEBUG_MEM("\r\n"); - - read32(0 + addr_offset); } - /** * Configure the bus between the cpu and the northbridge. This might be able to * be moved to post-ram code in the future. For the most part, these registers @@ -83,7 +82,7 @@ static void c7_cpu_setup(device_t dev) /* Arbitration */ pci_write_config8(dev, 0x53, 0x88); /* Miscellaneous Control */ - pci_write_config8(dev, 0x54, 0x10); + pci_write_config8(dev, 0x54, 0x1e); pci_write_config8(dev, 0x55, 0x16); /* Write Policy */ pci_write_config8(dev, 0x56, 0x01); @@ -93,9 +92,8 @@ static void c7_cpu_setup(device_t dev) * 010 : 166MHz 011 : 200MHz * 100 : 266MHz 101 : 333MHz * 110/111 : Reserved */ - //pci_write_config8(dev, 0x57, 0x60);//set 200MHz dram clock /* CPU Miscellaneous Control */ - pci_write_config8(dev, 0x59, 0x60); + pci_write_config8(dev, 0x59, 0x44); /* Write Policy */ pci_write_config8(dev, 0x5d, 0xb2); /* Bandwidth Timer */ @@ -113,16 +111,16 @@ static void c7_cpu_setup(device_t dev) pci_write_config8(dev, 0x65, 0x0f); /* Read Line Burst DRDY# Timing Control */ pci_write_config8(dev, 0x66, 0xff); - pci_write_config8(dev, 0x67, 0x70); + pci_write_config8(dev, 0x67, 0x30); /* Host Bus IO Circuit (See datasheet) */ /* Host Address Pullup/down Driving */ - pci_write_config8(dev, 0x70, 0x33); - pci_write_config8(dev, 0x71, 0x00); - pci_write_config8(dev, 0x72, 0x33); - pci_write_config8(dev, 0x73, 0x00); + pci_write_config8(dev, 0x70, 0x11); + pci_write_config8(dev, 0x71, 0x11); + pci_write_config8(dev, 0x72, 0x11); + pci_write_config8(dev, 0x73, 0x11); /* Miscellaneous Control */ - pci_write_config8(dev, 0x74, 0x00); + pci_write_config8(dev, 0x74, 0x35); /* AGTL+ I/O Circuit */ pci_write_config8(dev, 0x75, 0x28); /* AGTL+ Compensation Status */ @@ -135,12 +133,123 @@ static void c7_cpu_setup(device_t dev) pci_write_config8(dev, 0x79, 0xaa); /* Address Strobe Input Delay Control */ pci_write_config8(dev, 0x7a, 0x24); - /* Address CKG Rising/Falling Time Control */ - pci_write_config8(dev, 0x7b, 0x00); + // Address CKG Rising/Falling Time Control + pci_write_config8(dev, 0x7b, 0xaa); /* Address CKG Clock Rising/Falling Time Control */ pci_write_config8(dev, 0x7c, 0x00); /* Undefined (can't remember why I did this) */ - pci_write_config8(dev, 0x7d, 0x6d); + pci_write_config8(dev, 0x7d, 0x6d); + pci_write_config8(dev, 0x7e, 0x00); + pci_write_config8(dev, 0x7f, 0x00); + pci_write_config8(dev, 0x80, 0x1b); + pci_write_config8(dev, 0x81, 0x0a); + pci_write_config8(dev, 0x82, 0x0a); + pci_write_config8(dev, 0x83, 0x0a); +} + +/** + * Set up dram size according to spd data. Eventually, DRAM timings should be + * done in a similar manner. + * + * @param ctrl The northbridge devices and spd addresses. + */ +static void sdram_set_size(const struct mem_controller *ctrl) +{ + u8 density, ranks, result, col; + + ranks = spd_read_byte(ctrl->channel0[0], SPD_NUM_DIMM_BANKS); + ranks = (ranks & 0x07) + 1; + density = spd_read_byte(ctrl->channel0[0], SPD_DENSITY_OF_EACH_ROW_ON_MODULE); + switch (density) + { + case 0x80: + result = 0x08; /* 512MB / 64MB = 0x08 */ + break; + case 0x40: + result = 0x04; + break; + case 0x20: + result = 0x02; + break; + case 0x10: + result = 0xff; /* 16GB */ + break; + case 0x08: + result = 0xff; /* 8GB */ + break; + case 0x04: + result = 0xff; /* 4GB */ + break; + case 0x02: + result = 0x20; /* 2GB */ + break; + case 0x01: + result = 0x10; /* 1GB */ + break; + } + + if (result == 0xff) + die("dram module size too big, not supported by cn700\r\n"); + + pci_write_config8(ctrl->d0f3, 0x40, result); + pci_write_config8(ctrl->d0f3, 0x48, 0x00); + if (ranks == 2) { + pci_write_config8(ctrl->d0f3, 0x41, result * ranks); + pci_write_config8(ctrl->d0f3, 0x49, result); + } + /* size mirror */ + pci_write_config8(ctrl->d0f7, 0xe5, (result * ranks) << 2); + pci_write_config8(ctrl->d0f7, 0x57, (result * ranks) << 2); + /* Low Top Address */ + pci_write_config8(ctrl->d0f3, 0x84, 0x00); + pci_write_config8(ctrl->d0f3, 0x85, (result * ranks) << 2); + pci_write_config8(ctrl->d0f3, 0x88, (result * ranks) << 2); + + /* Physical-Virtual Mapping */ + if (ranks == 2) + pci_write_config8(ctrl->d0f3, 0x54, 1 << 7 | 0 << 4 | 1 << 3 | 1 << 0); + if (ranks == 1) + pci_write_config8(ctrl->d0f3, 0x54, 1 << 7 | 0 << 4); + pci_write_config8(ctrl->d0f3, 0x55, 0x00); + /* virtual rank interleave, disable */ + pci_write_config32(ctrl->d0f3, 0x58, 0x00); + + /* MA Map Type */ + result = spd_read_byte(ctrl->channel0[0], SPD_NUM_BANKS_PER_SDRAM); + if (result == 8) { + col = spd_read_byte(ctrl->channel0[0], SPD_NUM_COLUMNS); + switch (col) + { + case 10: + pci_write_config8(ctrl->d0f3, 0x50, 0xa0); + break; + case 11: + pci_write_config8(ctrl->d0f3, 0x50, 0xc0); + break; + case 12: + pci_write_config8(ctrl->d0f3, 0x50, 0xe0); + break; + } + } + else if (result == 4) { + col = spd_read_byte(ctrl->channel0[0], SPD_NUM_COLUMNS); + switch (col) + { + case 9: + pci_write_config8(ctrl->d0f3, 0x50, 0x00); + break; + case 10: + pci_write_config8(ctrl->d0f3, 0x50, 0x20); + break; + case 11: + pci_write_config8(ctrl->d0f3, 0x50, 0x40); + break; + case 12: + pci_write_config8(ctrl->d0f3, 0x50, 0x60); + break; + } + } + pci_write_config8(ctrl->d0f3, 0x51, 0x00); } /** @@ -150,224 +259,204 @@ static void c7_cpu_setup(device_t dev) */ static void sdram_set_registers(const struct mem_controller *ctrl) { - /* DQ/DQS Strength Control */ - pci_write_config8(ctrl->d0f3, 0xd0, 0x88); - pci_write_config8(ctrl->d0f3, 0xd1, 0x8b); - pci_write_config8(ctrl->d0f3, 0xd2, 0x89); - /* SMM and APIC Decoding */ - pci_write_config8(ctrl->d0f3, 0x86, 0x2d); + u8 reg; + + /* Set WR=5 */ + pci_write_config8(ctrl->d0f3, 0x61, 0xe0); + /* Set CAS=4 */ + pci_write_config8(ctrl->d0f3, 0x62, 0xfa); + /* dram timing-3 */ + pci_write_config8(ctrl->d0f3, 0x63, 0xca); + /* dram timing-4 */ + pci_write_config8(ctrl->d0f3, 0x64, 0xcc); + /* DIMM command / Address Selection */ + pci_write_config8(ctrl->d0f3, 0x67, 0x00); + /* Disable cross bank/multi page mode */ + pci_write_config8(ctrl->d0f3, 0x69, 0x00); + /* disable refresh now */ + pci_write_config8(ctrl->d0f3, 0x6a, 0x00); + + /* frequency 100MHZ */ + pci_write_config8(ctrl->d0f3, 0x90, 0x00); + pci_write_config8(ctrl->d0f2, 0x57, 0x18); + /* Allow manual dll reset */ + pci_write_config8(ctrl->d0f3, 0x6b, 0x10); + + /* Bank/Rank Interleave Address Select */ + pci_write_config8(ctrl->d0f3, 0x52, 0x33); + pci_write_config8(ctrl->d0f3, 0x53, 0x3f); - /* Driving selection */ - /* DQ / DQS ODT Driving and Range Select */ + /* Set to DDR2 sdram, BL=8 (0xc8, 0xc0 for bl=4) */ + pci_write_config8(ctrl->d0f3, 0x6c, 0xc8); + + /* DRAM Bus Turn-Around Setting */ + pci_write_config8(ctrl->d0f3, 0x60, 0x03); + /* DRAM Arbitration Control */ + pci_write_config8(ctrl->d0f3, 0x66, 0x80); + /* DQS Tuning: testing on a couple different boards has shown this is + * static, or close enough that it can be. Which is good, because the + * tuning function used too many registers + */ + /* DQS Output Delay for CHannel A */ + pci_write_config8(ctrl->d0f3, 0x70, 0x00); + /* MD Output Delay for Channel A */ + pci_write_config8(ctrl->d0f3, 0x71, 0x01); + pci_write_config8(ctrl->d0f3, 0x73, 0x01); + + /* dram arbitration timer */ + pci_write_config8(ctrl->d0f3, 0x65, 0xd9); + + /* dram signal timing control */ + pci_write_config8(ctrl->d0f3, 0x74, 0x01); + pci_write_config8(ctrl->d0f3, 0x75, 0x01); + pci_write_config8(ctrl->d0f3, 0x76, 0x06); + pci_write_config8(ctrl->d0f3, 0x77, 0x92); + pci_write_config8(ctrl->d0f3, 0x78, 0x83); + pci_write_config8(ctrl->d0f3, 0x79, 0x83); + pci_write_config8(ctrl->d0f3, 0x7a, 0x00); + pci_write_config8(ctrl->d0f3, 0x7b, 0x10); + + /* dram clocking control */ + pci_write_config8(ctrl->d0f3, 0x91, 0x01); + /* CS/CKE Clock Phase Control */ + pci_write_config8(ctrl->d0f3, 0x92, 0x02); + /* SCMD/MA Clock Phase Control */ + pci_write_config8(ctrl->d0f3, 0x93, 0x02); + /* DCLKO Feedback Mode Output Control */ + pci_write_config8(ctrl->d0f3, 0x94, 0x00); + pci_write_config8(ctrl->d0f3, 0x9d, 0x0f); + + /* SDRAM ODT Control */ + pci_write_config8(ctrl->d0f3, 0xda, 0x80); + /* Channel A DQ/DQS CKG Output Delay Control */ + pci_write_config8(ctrl->d0f3, 0xdc, 0x54); + /* Channel A DQ/DQS CKG Output Delay Control */ + pci_write_config8(ctrl->d0f3, 0xdd, 0x55); + /* odt lookup table */ + pci_write_config8(ctrl->d0f3, 0xd8, 0x01); + pci_write_config8(ctrl->d0f3, 0xd9, 0x0a); + + /* ddr sdram control */ + pci_write_config8(ctrl->d0f3, 0x6d, 0xc0); + pci_write_config8(ctrl->d0f3, 0x6f, 0x41); + + /* DQ/DQS Strength Control */ + pci_write_config8(ctrl->d0f3, 0xd0, 0xaa); + + /* Compensation Control */ + pci_write_config8(ctrl->d0f3, 0xd3, 0x01); /*enable auto compensation*/ + /* ODT (some are set with driving select above) */ + pci_write_config8(ctrl->d0f3, 0xd4, 0x80); pci_write_config8(ctrl->d0f3, 0xd5, 0x8a); /* Memory Pads Driving and Range Select */ pci_write_config8(ctrl->d0f3, 0xd6, 0xaa); - /* DRAM Driving – Group DQS */ + pci_write_config8(ctrl->d0f3, 0xe0, 0xee); - /* DRAM Driving – Group DQ (DQ, MPD, DQM) */ - pci_write_config8(ctrl->d0f3, 0xe2, 0xac);//ba - /* DRAM Driving – Group CS */ + pci_write_config8(ctrl->d0f3, 0xe2, 0xac); pci_write_config8(ctrl->d0f3, 0xe4, 0x66); - /* DRAM Driving – Group MA */ + pci_write_config8(ctrl->d0f3, 0xe6, 0x33); pci_write_config8(ctrl->d0f3, 0xe8, 0x86); - /* DRAM Driving – Group MCLK */ - pci_write_config8(ctrl->d0f3, 0xe6, 0xaa); - - /* ODT (some are set with driving select above) */ - /* Memory Pad ODT Pullup / Pulldown Control */ - pci_write_config8(ctrl->d0f3, 0xd4, 0x0a); - /* Memory Ranks ODT Lookup Table */ - pci_write_config8(ctrl->d0f3, 0xd8, 0x00);//was 1 - /* Compensation Control */ - pci_write_config8(ctrl->d0f3, 0xd3, 0x89);//enable auto compensation - - /* MCLKO Phase Control */ - pci_write_config8(ctrl->d0f3, 0x91, 0x02); - /* CS/CKE Clock Phase Control */ - pci_write_config8(ctrl->d0f3, 0x92, 0x06); - /* SCMD/MA Clock Phase Control */ - pci_write_config8(ctrl->d0f3, 0x93, 0x07); - /* Channel A DQS Input Capture Range Control */ - pci_write_config8(ctrl->d0f3, 0x78, 0x83); - /* DQS Input Capture Range Control */ - /* Set in accordance with the BIOS update note */ - pci_write_config8(ctrl->d0f3, 0x7a, 0x00); - /* DQS Input Delay Offset Control */ - pci_write_config8(ctrl->d0f3, 0x7c, 0x00); - /* SDRAM ODT Control */ - pci_write_config8(ctrl->d0f3, 0xda, 0x80); - /* DQ/DQS CKG Output Delay Control - I */ - pci_write_config8(ctrl->d0f3, 0xdc, 0xff); - /* DQ/DQS CKG Output Delay Control - II */ - pci_write_config8(ctrl->d0f3, 0xdd, 0xff); /* DQS / DQ CKG Duty Cycle Control */ - pci_write_config8(ctrl->d0f3, 0xec, 0x88); + pci_write_config8(ctrl->d0f3, 0xec, 0x00); /* MCLK Output Duty Control */ pci_write_config8(ctrl->d0f3, 0xee, 0x00); - pci_write_config8(ctrl->d0f3, 0xed, 0x10); /* DQS CKG Input Delay Control */ pci_write_config8(ctrl->d0f3, 0xef, 0x10); - - pci_write_config8(ctrl->d0f3, 0x77, 0x9d); - pci_write_config8(ctrl->d0f3, 0x79, 0x83); - pci_write_config16(ctrl->d0f3, 0x88, 0x0020); - pci_write_config8(ctrl->d0f4, 0xa7, 0x80); + /* dram duty control */ + pci_write_config8(ctrl->d0f3, 0xed, 0x10); - /* VLink Control */ - pci_write_config8(ctrl->d0f7, 0xb0, 0x05); - pci_write_config8(ctrl->d0f7, 0xb1, 0x01); - - /* Memory base */ - pci_write_config16(ctrl->d1f0, 0x20, 0xfb00); - /* Memory limit */ - pci_write_config16(ctrl->d1f0, 0x22, 0xfcf0); - /* Prefetch memory base */ - pci_write_config16(ctrl->d1f0, 0x24, 0xf400); - /* Prefetch memory limit */ - pci_write_config16(ctrl->d1f0, 0x26, 0xf7f0); - /* PCI to PCI bridge control */ - pci_write_config16(ctrl->d1f0, 0x3e, 0x0008); - - /* CPU to PCI flow control 1 */ - pci_write_config8(ctrl->d1f0, 0x40, 0x83); - pci_write_config8(ctrl->d1f0, 0x41, 0xc3);//clear reset error, set to 43 - pci_write_config8(ctrl->d1f0, 0x42, 0xe2); - pci_write_config8(ctrl->d1f0, 0x43, 0x44); - pci_write_config8(ctrl->d1f0, 0x44, 0x34); - pci_write_config8(ctrl->d1f0, 0x45, 0x72); + /* SMM and APIC deocoding, we donot use SMM */ + reg = 0x29; + pci_write_config8(ctrl->d0f3, 0x86, reg); + /* SMM and APIC decoding mirror */ + pci_write_config8(ctrl->d0f7, 0xe6, reg); - /* Disable cross bank/multi page mode */ - pci_write_config8(ctrl->d0f3, DDR_PAGE_CTL, 0x80); - pci_write_config8(ctrl->d0f3, DRAM_REFRESH_COUNTER, 0x00); - - /* Set WR=5 and RFC */ - pci_write_config8(ctrl->d0f3, 0x61, 0xc7); - /* Set CAS=5 */ - pci_write_config8(ctrl->d0f3, 0x62, 0xaf); - pci_write_config8(ctrl->d0f3, 0x63, 0xca); - /* Set to DDR2 sdram, BL=8 (0xc8, 0xc0 for bl=4) */ - pci_write_config8(ctrl->d0f3, 0x6c, 0xc8); - /* Allow manual dll reset */ - pci_write_config8(ctrl->d0f3, 0x6b, 0x10); - + /* dram module configuration */ pci_write_config8(ctrl->d0f3, 0x6e, 0x89); - pci_write_config8(ctrl->d0f3, 0x67, 0x50); - pci_write_config8(ctrl->d0f3, 0x65, 0xd9); - - /* Only enable bank 1, for now */ - /* TODO: Multiple, dynamically controlled bank enables */ - pci_write_config8(ctrl->d0f3, 0x54, 0x80); - pci_write_config8(ctrl->d0f3, 0x55, 0x00); - - /* Set to 2T, MA Map type 1. - * TODO: Needs to become dynamic */ - pci_write_config16(ctrl->d0f3, 0x50, 0x0020); - - /* BA0-2 Selection. Don't mess with */ - pci_write_config8(ctrl->d0f3, 0x52, 0x33); - pci_write_config8(ctrl->d0f3, 0x53, 0x3f); - - /* Disable bank interleaving. This feature seems useless anyways */ - pci_write_config32(ctrl->d0f3, 0x58, 0x00000000); - pci_write_config8(ctrl->d0f3, 0x88, 0x08); - - /* Some DQS control stuffs */ - pci_write_config8(ctrl->d0f3, 0x74, 0x04); - pci_write_config8(ctrl->d0f3, 0x75, 0x04); - pci_write_config8(ctrl->d0f3, 0x76, 0x00); } -/** - * Set up dram size according to spd data. Eventually, DRAM timings should be - * done in a similar manner. - * - * @param ctrl The northbridge devices and spd addresses. - */ -static void sdram_set_spd_registers(const struct mem_controller *ctrl) +static void sdram_set_post(const struct mem_controller *ctrl) { - u8 spd_data, spd_data2; + device_t dev = ctrl->d0f3; + /* Enable multipage mode. */ + pci_write_config8(dev, 0x69, 0x03); + + /* Enable refresh. */ + pci_write_config8(dev, 0x6a, 0x32); + + // vga device + pci_write_config16(dev, 0xa0, (1 <<15)); + pci_write_config16(dev, 0xa4, 0x0010); - /* DRAM Bank Size */ - spd_data = spd_read_byte(ctrl->channel0[0], - SPD_DENSITY_OF_EACH_ROW_ON_MODULE); - /* I know this seems weird. Blame JEDEC/Via. */ - if(spd_data >= 0x10) - spd_data = spd_data >> 1; - else - spd_data = spd_data << 1; - - /* Check for double sided dimm and adjust size accordingly */ - spd_data2 = spd_read_byte(ctrl->channel0[0], SPD_NUM_BANKS_PER_SDRAM); - /* There should be 4 banks on a single sided dimm, - * or 8 on a dual sided one */ - spd_data = spd_data * (spd_data2 / 4); - pci_write_config8(ctrl->d0f3, 0x40, spd_data); - /* TODO: The rest of the DIMMs */ } -static void sdram_enable(device_t dev) +static void sdram_enable(device_t dev, unsigned long rank_address) { - int i; + u8 i; /* 1. Apply NOP. */ PRINT_DEBUG_MEM("RAM Enable 1: Apply NOP\r\n"); - do_ram_command(dev, RAM_COMMAND_NOP, 0); - udelay(200); + do_ram_command(dev, RAM_COMMAND_NOP); + udelay(100); + read32(rank_address + 0x10); /* 2. Precharge all. */ + udelay(400); PRINT_DEBUG_MEM("RAM Enable 2: Precharge all\r\n"); - do_ram_command(dev, RAM_COMMAND_PRECHARGE, 0); + do_ram_command(dev, RAM_COMMAND_PRECHARGE); + read32(rank_address + 0x10); /* 3. Mode register set. */ PRINT_DEBUG_MEM("RAM Enable 4: Mode register set\r\n"); - do_ram_command(dev, RAM_COMMAND_MRS, 0x2000);//enable dll - do_ram_command(dev, RAM_COMMAND_MRS, 0x800);//reset dll + do_ram_command(dev, RAM_COMMAND_MRS); + read32(rank_address + 0x120000);// EMRS DLL Enable + read32(rank_address + 0x800); // MRS DLL Reset /* 4. Precharge all again. */ PRINT_DEBUG_MEM("RAM Enable 2: Precharge all\r\n"); - do_ram_command(dev, RAM_COMMAND_PRECHARGE, 0); + do_ram_command(dev, RAM_COMMAND_PRECHARGE); + read32(rank_address + 0x0); /* 5. Perform 8 refresh cycles. Wait tRC each time. */ PRINT_DEBUG_MEM("RAM Enable 3: CBR\r\n"); - do_ram_command(dev, RAM_COMMAND_CBR, 0); - /* First read is actually done by do_ram_command */ - for(i = 0; i < 7; i++) { + do_ram_command(dev, RAM_COMMAND_CBR); + for(i = 0; i < 8; i++) { + read32(rank_address + 0x20); udelay(100); - read32(0); } /* 6. Mode register set. */ PRINT_DEBUG_MEM("RAM Enable 4: Mode register set\r\n"); - //safe value for now, BL=8, WR=5, CAS=5 + //safe value for now, BL=8, WR=5, CAS=4 /* (E)MRS values are from the BPG. No direct explanation is given, but * they should somehow conform to the JEDEC DDR2 SDRAM Specification * (JESD79-2C). */ - do_ram_command(dev, RAM_COMMAND_MRS, 0x0022d8); - - /* 7. Mode register set. */ - PRINT_DEBUG_MEM("RAM Enable 4: Mode register set\r\n"); - do_ram_command(dev, RAM_COMMAND_MRS, 0x21c20);//default OCD calibration - do_ram_command(dev, RAM_COMMAND_MRS, 0x20020);//exit calibration mode + do_ram_command(dev, RAM_COMMAND_MRS); + read32(rank_address + 0x002258); // MRS command + read32(rank_address + 0x121c20); // EMRS OCD Default + read32(rank_address + 0x120020); // EMRS OCD Calibration Mode Exit /* 8. Normal operation */ PRINT_DEBUG_MEM("RAM Enable 5: Normal operation\r\n"); - do_ram_command(dev, RAM_COMMAND_NORMAL, 0); - - /* Enable multipage mode. */ - pci_write_config8(dev, DDR_PAGE_CTL, 0x83); - /* Enable refresh. */ - pci_write_config8(dev, DRAM_REFRESH_COUNTER, 0x32); - - /* DQS Tuning: testing on a couple different boards has shown this is - * static, or close enough that it can be. Which is good, because the - * tuning function used too many registers. */ - pci_write_config8(dev, CH_A_DQS_OUTPUT_DELAY, 0x00); - pci_write_config8(dev, CH_A_MD_OUTPUT_DELAY, 0x03); - - /* Enable VGA device with no memory, add memory later. We need this - * here to enable the actual device, otherwise it won't show up until - * later and LB will have a fit. */ - pci_write_config16(dev, 0xa0, (1 << 15)); - pci_write_config16(dev, 0xa4, 0x0010); + do_ram_command(dev, RAM_COMMAND_NORMAL); + read32(rank_address + 0x30); +} + +/* + * Support one dimm with up to 2 ranks + */ +static void ddr_ram_setup(const struct mem_controller *ctrl) +{ + u8 reg; + + c7_cpu_setup(ctrl->d0f2); + sdram_set_registers(ctrl); + sdram_set_size(ctrl); + sdram_enable(ctrl->d0f3, 0); + reg = pci_read_config8(ctrl->d0f3, 0x41); + if (reg != 0) + sdram_enable(ctrl->d0f3, pci_read_config8(ctrl->d0f3, 0x40) << 26); + sdram_set_post(ctrl); } + -- cgit v1.2.3