From 7ae74b40bfea4d1d78e7469895f4c3f788e0917c Mon Sep 17 00:00:00 2001 From: "Ronald G. Minnich" Date: Mon, 25 Oct 2004 14:57:24 +0000 Subject: from Mark Wilkinson, some fixes. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1713 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- targets/via/epia/Config.512kflash.lb | 81 +------------------------------- targets/via/epia/Config.filo.lb | 81 +------------------------------- targets/via/epia/Config.ituner.filo.lb | 86 +--------------------------------- targets/via/epia/Config.lb | 85 +-------------------------------- 4 files changed, 8 insertions(+), 325 deletions(-) (limited to 'targets/via') diff --git a/targets/via/epia/Config.512kflash.lb b/targets/via/epia/Config.512kflash.lb index 732333ee89..e4980b92ce 100644 --- a/targets/via/epia/Config.512kflash.lb +++ b/targets/via/epia/Config.512kflash.lb @@ -1,93 +1,17 @@ # Sample config file for EPIA # This will make a target directory of ./epia.512kflash -loadoptions - target epia.512kflash - -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION - -option CONFIG_CHIP_CONFIGURE=1 - -option MAXIMUM_CONSOLE_LOGLEVEL=8 -option DEFAULT_CONSOLE_LOGLEVEL=8 -option CONFIG_CONSOLE_SERIAL8250=1 - -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 +mainboard via/epia option ROM_SIZE=524288 - -option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 -option HAVE_FALLBACK_BOOT=1 - -### -### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. -### -option FALLBACK_SIZE=131072 - -## LinuxBIOS C code runs at this location in RAM -option _RAMBASE=0x00004000 - -# -### -### Compute the start location and size size of -### The linuxBIOS bootloader. -### - # -# Arima hdama +# Via Epia romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" - mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi @@ -97,7 +21,6 @@ romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi diff --git a/targets/via/epia/Config.filo.lb b/targets/via/epia/Config.filo.lb index bc69e5b8f1..665bde3253 100644 --- a/targets/via/epia/Config.filo.lb +++ b/targets/via/epia/Config.filo.lb @@ -1,91 +1,15 @@ # Sample config file for EPIA # This will make a target directory of ./epia -loadoptions - target epia - -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION - -option CONFIG_CHIP_CONFIGURE=1 - -option MAXIMUM_CONSOLE_LOGLEVEL=8 -option DEFAULT_CONSOLE_LOGLEVEL=8 -option CONFIG_CONSOLE_SERIAL8250=1 - -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 -option ROM_SIZE=256*1024 - -option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 -option HAVE_FALLBACK_BOOT=1 - -### -### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. -### -option FALLBACK_SIZE=131072 - -## LinuxBIOS C code runs at this location in RAM -option _RAMBASE=0x00004000 - -# -### -### Compute the start location and size size of -### The linuxBIOS bootloader. -### +mainboard via/epia # -# Arima hdama +# Via Epia romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" - mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi @@ -96,7 +20,6 @@ romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi diff --git a/targets/via/epia/Config.ituner.filo.lb b/targets/via/epia/Config.ituner.filo.lb index 08a017a7f6..fcab1a59ad 100644 --- a/targets/via/epia/Config.ituner.filo.lb +++ b/targets/via/epia/Config.ituner.filo.lb @@ -1,96 +1,15 @@ # Sample config file for EPIA # This will make a target directory of ./epia -loadoptions - target epia-ituner-filo - -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION -uses TTYS0_BAUD - - -option CONFIG_CHIP_CONFIGURE=1 - -option MAXIMUM_CONSOLE_LOGLEVEL=8 -option DEFAULT_CONSOLE_LOGLEVEL=3 -option CONFIG_CONSOLE_SERIAL8250=1 - -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 -option ROM_SIZE=256*1024 - -option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 -option HAVE_FALLBACK_BOOT=1 - -# Ituner m100 needs 19200 -option TTYS0_BAUD=19200 - -### -### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. -### -option FALLBACK_SIZE=131072 - -## LinuxBIOS C code runs at this location in RAM -option _RAMBASE=0x00004000 - -# -### -### Compute the start location and size size of -### The linuxBIOS bootloader. -### +mainboard via/epia # -# Arima hdama +# Via Epia romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" - mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi @@ -101,7 +20,6 @@ romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi diff --git a/targets/via/epia/Config.lb b/targets/via/epia/Config.lb index 0f95f9f367..ba4297d648 100644 --- a/targets/via/epia/Config.lb +++ b/targets/via/epia/Config.lb @@ -1,94 +1,14 @@ # Sample config file for EPIA # This will make a target directory of ./epia -loadoptions - target epia - -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION -uses TTYS0_BAUD - -option TTYS0_BAUD=19200 - -option CONFIG_CHIP_CONFIGURE=1 - -option MAXIMUM_CONSOLE_LOGLEVEL=7 -option DEFAULT_CONSOLE_LOGLEVEL=7 -option CONFIG_CONSOLE_SERIAL8250=1 - -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 -option ROM_SIZE=256*1024 - -option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 -option HAVE_FALLBACK_BOOT=1 - -### -### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. -### -option FALLBACK_SIZE=131072 - -## LinuxBIOS C code runs at this location in RAM -option _RAMBASE=0x00004000 - -# -### -### Compute the start location and size size of -### The linuxBIOS bootloader. -### - +mainboard via/epia # -# Arima hdama +# Via Epia romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" - mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi @@ -98,7 +18,6 @@ romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi -- cgit v1.2.3