menu "Console options"

# TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete.
config CONSOLE_SERIAL8250
	bool "Enable serial port console output"
	default y
	help
	  Send coreboot debug output to a serial port console.

# TODO: COM1, COM2 etc.
config TTYS0_BASE
	hex "I/O base for the serial port"
	depends on CONSOLE_SERIAL8250
	default 0x3f8

config TTYS0_BAUD
	int "Serial port BAUD rate"
	depends on CONSOLE_SERIAL8250
	default 115200

# TODO: Allow user-friendly selection of settings other than 8n1.
config TTYS0_LCS
	int
	default 3
	depends on CONSOLE_SERIAL8250

config SERIAL_POST
	bool "Enable POST output on the serial port console"
	depends on CONSOLE_SERIAL8250
	default n
	help
	  If enabled, coreboot will additionally print POST codes (which are
	  usually displayed using a so-called "POST card" ISA/PCI/PCI-E
	  device) on the serial console.

# TODO: FIX DEPENDENCY HERE
config USBDEBUG_DIRECT
	bool "USB 2.0 EHCI debug dongle support"
	default n
	help
	  This option allows you to use a so-called USB EHCI Debug device
	  to retrieve the coreboot debug messages (instead, or in addition
	  to, a serial port).

	  This feature is NOT supported on all chipsets in coreboot!

	  It also requires a USB2 controller which supports the EHCI
	  Debug Port capability. Controllers which are known to work:
	
	    * 10b9:5239 ALi Corporation USB 2.0 (USB PCI card)
	    * 8086:24cd Intel ICH4/ICH4-M
	    * 8086:24dd Intel ICH5
	    * 8086:265c Intel ICH6
	    * 8086:268c Intel 631xESB/632xESB/3100
	    * 8086:27cc Intel ICH7
	    * 8086:2836 Intel ICH8
	    * 8086:283a Intel ICH8
	    * 8086:293a Intel ICH9
	    * 10de:0088 NVIDIA MCP2A
	    * 10de:005b NVIDIA CK804
	    * 10de:026e NVIDIA MCP51
	    * 10de:036d NVIDIA MCP55
	    * 10de:03f2 NVIDIA MCP61
	    * 1002:4386 ATI/AMD SB600
	    * 1106:3104 VIA VX800

	  See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list.

config CONSOLE_VGA
	bool "Use VGA console once initialized"
	default n

# TODO: Deps?
# TODO: Improve description.
config CONSOLE_VGA_ONBOARD_AT_FIRST
	bool "Use onboard VGA as primary video device"
	default n
	help
	  If not selected, the last adapter found will be used.

# TODO: User-friendly "choice" selection.
# TODO: Add help text.
config MAXIMUM_CONSOLE_LOGLEVEL
	int "Maximum console loglevel"
	default 9

# TODO: User-friendly "choice" selection.
# TODO: Add help text.
config DEFAULT_CONSOLE_LOGLEVEL
	int "Default console loglevel"
	default 9

endmenu