config CPU_ALLWINNER_A10
	bool
	default n

if CPU_ALLWINNER_A10

config CPU_SPECIFIC_OPTIONS
	def_bool y
	select HAVE_MONOTONIC_TIMER
	select HAVE_UART_SPECIAL
	select HAVE_UART_MEMORY_MAPPED
	select BOOTBLOCK_CONSOLE
	select EARLY_CONSOLE

config BOOTBLOCK_CPU_INIT
	string
	default "cpu/allwinner/a10/bootblock.c"
	help
	  CPU/SoC-specific bootblock code. This is useful if the
	  bootblock must load microcode or copy data from ROM before
	  searching for the bootblock.

# The "eGON.BT0" header takes 32 bytes
config BOOTBLOCK_BASE
	hex
	default 0x20

config BOOTBLOCK_ROM_OFFSET
	hex
	default 0x00

config CBFS_HEADER_ROM_OFFSET
	hex
	default 0x10

config CBFS_ROM_OFFSET
	# Calculated by BL1 + max bootblock size.
	default 0x4c00

# FIXME: untested
config ROMSTAGE_BASE
	hex
	default SYS_SDRAM_BASE

# Keep the stack in SRAM block A2.
# SRAM blocks A1 (0-16KiB) and A2 (16KiB-32KiB) are always accessible to the
# CPU. This gives us 32KiB of SRAM to boot with. The BROM bootloader will use up
# to 24KiB to load our bootblock, which leaves us the area from 24KiB to 32KiB
# to use however we see fit.
config STACK_TOP
	hex
	default 0x00008000

config STACK_BOTTOM
	hex
	default 0x00006000

config STACK_SIZE
	hex
	default 0x00002000

## TODO Change this to some better address not overlapping bootblock when
## cbfstool supports creating header in arbitrary location.
config CBFS_HEADER_ROM_OFFSET
	hex "offset of master CBFS header in ROM"
	default 0x40

config SYS_SDRAM_BASE
	hex
	default 0x40000000

choice CONSOLE_SERIAL_UART_CHOICES
	prompt "Serial Console UART"
	default CONSOLE_SERIAL_UART0
	depends on CONSOLE_SERIAL_UART

config CONSOLE_SERIAL_UART0
	bool "UART0"
	help
	  Serial console on UART0

config CONSOLE_SERIAL_UART1
	bool "UART1"
	help
	  Serial console on UART1

config CONSOLE_SERIAL_UART2
	bool "UART2"
	help
	  Serial console on UART2

config CONSOLE_SERIAL_UART3
	bool "UART3"
	help
	  Serial console on UART3

config CONSOLE_SERIAL_UART4
	bool "UART4"
	help
	  Serial console on UART4

config CONSOLE_SERIAL_UART5
	bool "UART5"
	help
	  Serial console on UART5

config CONSOLE_SERIAL_UART6
	bool "UART6"
	help
	  Serial console on UART6

config CONSOLE_SERIAL_UART7
	bool "UART7"
	help
	  Serial console on UART7

endchoice

endif # if CPU_ALLWINNER_A10