#Define gppsb_configuration,	A=0, B=1, C=2, D=3, E=4(default)
#Define gpp_configuration -> device 9 1x and device a 1x is 3 and device 9 2x is 2
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
#			1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot (means if GFX slot are two 2 8x slots)
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
#Define gfx_tmds, 0: didn't support TMDS, 1: support
#Define gfx_compliance, 0: didn't support compliance, 1: support
#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
chip northbridge/amd/amdk8/root_complex
	device cpu_cluster 0 on
		chip cpu/amd/socket_939
		device lapic 0 on end
		end
	end
	device domain 0 on
		subsystemid 0x1022 0x3060 inherit
		chip northbridge/amd/amdk8
			device pci 18.0 on #  southbridge
				chip southbridge/amd/rs780
					device pci 0.0 on end # HT  	0x9600
					device pci 1.0 on end # Internal Graphics P2P bridge 0x9602
					device pci 2.0 on end # PCIE P2P bridge 16x slot
					device pci 3.0 off end # used in dual slot config
					device pci 4.0 off end # GPPSB
					device pci 5.0 off end # GPPSB
					device pci 6.0 off end # GPPSB
					device pci 7.0 off end # GPPSB
					device pci 8.0 off end # NB/SB Link P2P bridge
					device pci 9.0 on end # GPP for x1 slot
					device pci a.0 on end # GPP for internal network adapter
					register "gppsb_configuration" = "4"   # Configuration ?
					register "gpp_configuration" = "3"   # Configuration D default
					register "port_enable" = "0x60c"
					register "gfx_dev2_dev3" = "1"
					register "gfx_dual_slot" = "0"
					register "gfx_lane_reversal" = "0"
					register "gfx_tmds" = "0"
					register "gfx_compliance" = "0"
					register "gfx_reconfiguration" = "1"
					register "gfx_link_width" = "0"
				end
				chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus
					device pci 11.0 on end # SATA
					device pci 12.0 on end # USB
					device pci 12.1 on end # USB
					device pci 12.2 on end # USB
					device pci 13.0 on end # USB
					device pci 13.1 on end # USB
					device pci 13.2 on end # USB
	 				device pci 14.0 on # SM
						chip drivers/generic/generic #dimm 0-0-0
							device i2c 50 on end
						end
						chip drivers/generic/generic #dimm 0-0-1
							device i2c 51 on end
						end
						chip drivers/generic/generic #dimm 0-1-0
							device i2c 52 on end
						end
						chip drivers/generic/generic #dimm 0-1-1
							device i2c 53 on end
						end
					end # SM
					device pci 14.1 on end # IDE    0x439c
					device pci 14.2 on end # HDA    0x4383
					device pci 14.3 on # LPC	0x439d

						chip superio/winbond/w83627dhg
							device pnp 2e.0 off #  Floppy
								io 0x60 = 0x3f0
								irq 0x70 = 6
								drq 0x74 = 2
							end
							device pnp 2e.1 off #  Parallel Port
								io 0x60 = 0x378
								irq 0x70 = 7
							end
							device pnp 2e.2 on #  Com1
								io 0x60 = 0x3f8
								irq 0x70 = 4
							end
							device pnp 2e.3 on #  Com2
								io 0x60 = 0x2f8
								irq 0x70 = 3
							end
							device pnp 2e.5 on #  PS/2 keyboard & mouse
								io 0x60 = 0x60
								io 0x62 = 0x64
								irq 0x70 = 1
							end
							#device pnp 2e.6 off #  SPI
							#end
							device pnp 2e.307 off #  GPIO6
							end
							device pnp 2e.8 on #  WDTO#, PLED
							end
							device pnp 2e.009 on #  GPIO2
							end
							device pnp 2e.109 on #  GPIO3
							end
							device pnp 2e.209 on #  GPIO4
							end
							device pnp 2e.309 off #  GPIO5
							end
							device pnp 2e.a off #  ACPI
							end
							device pnp 2e.b on # HWM
								io 0x60 = 0x290
							end
							device pnp 2e.c off # PECI, SST
							end
						end	#superio/winbond/w8362

					end		#LPC
					device pci 14.4 on end # PCI 0x4384
					device pci 14.5 on end # USB 2
					register "boot_switch_sata_ide" = "0"	# 0: boot from SATA. 1: IDE
				end	#southbridge/amd/sb700
			end #  device pci 18.0

			device pci 18.0 on end
			device pci 18.0 on end
			device pci 18.1 on end
			device pci 18.2 on end
			device pci 18.3 on end
		end		#northbridge/amd/amdk8
	end #domain
end		#northbridge/amd/amdk8/root_complex