##
## This file is part of the coreboot project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb

arch i386 end
driver mainboard.o
if CONFIG_HAVE_PIRQ_TABLE
	object irq_tables.o
end
makerule ./failover.E
	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./failover.inc
	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
	action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./auto.E
	# depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
	depends	"$(CONFIG_MAINBOARD)/auto.c ../romcc"
	# Note: The -mcpu=p2 is important, or else... 'too few registers'.
	action	"../romcc -mcpu=p2 -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
	# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
	depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
	# Note: The -mcpu=p2 is important, or else... 'too few registers'.
	action	"../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
if CONFIG_USE_FALLBACK_IMAGE
	mainboardinit cpu/x86/16bit/reset16.inc
	ldscript /cpu/x86/16bit/reset16.lds
else
	mainboardinit cpu/x86/32bit/reset32.inc
	ldscript /cpu/x86/32bit/reset32.lds
end
mainboardinit arch/i386/lib/cpu_reset.inc
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if CONFIG_USE_FALLBACK_IMAGE
	ldscript /arch/i386/lib/failover.lds
	mainboardinit ./failover.inc
end
mainboardinit cpu/x86/fpu/enable_fpu.inc
mainboardinit cpu/x86/mmx/enable_mmx.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/mmx/disable_mmx.inc

dir /pc80
config chip.h

# TODO: On-board graphics.
chip northbridge/intel/i82810		# Northbridge
  device apic_cluster 0 on		# APIC cluster
    chip cpu/intel/socket_PGA370	# CPU
      device apic 0 on end		# APIC
    end
  end
  device pci_domain 0 on		# PCI domain
    device pci 0.0 on end		# Graphics Memory Controller Hub (GMCH)
    device pci 1.0 on end		# Chipset Graphics Controller (CGC)
    chip southbridge/intel/i82801xx	# Southbridge
      register "ide0_enable" = "1"
      register "ide1_enable" = "1"

      device pci 1e.0 on end		# PCI bridge
      device pci 1f.0 on		# ISA bridge
        chip superio/smsc/smscsuperio	# Super I/O
          device pnp 2e.0 on		# Floppy
            io 0x60 = 0x3f0
            irq 0x70 = 6
            drq 0x74 = 2
          end
          device pnp 2e.3 on		# Parallel port
            io 0x60 = 0x378
            irq 0x70 = 7
            drq 0x74 = 4
          end
          device pnp 2e.4 on		# COM1
            io 0x60 = 0x3f8
            irq 0x70 = 4
          end
          device pnp 2e.5 on		# COM2 / IR
            io 0x60 = 0x2f8
            irq 0x70 = 3
          end
          device pnp 2e.7 on		# PS/2 keyboard / mouse
            io 0x60 = 0x60
            io 0x62 = 0x64
            irq 0x70 = 1		# PS/2 keyboard interrupt
            irq 0x72 = 12		# PS/2 mouse interrupt
          end
          device pnp 2e.9 on		# Game port
            io 0x60 = 0x201
          end
          device pnp 2e.a on		# Power-management events (PME)
            io 0x60 = 0x600
          end
          device pnp 2e.b on		# MIDI port (MPU-401)
            io 0x60 = 0x330
            irq 0x70 = 5
          end
        end
      end
      device pci 1f.1 on end		# IDE
      device pci 1f.2 on end		# USB
      device pci 1f.3 on end		# SMbus
      device pci 1f.5 off end		# AC'97 audio (N/A, uses CS4280 chip)
      device pci 1f.6 off end		# AC'97 modem (N/A)
    end
  end
end