#define ASSEMBLY 1 #include #include #include #include #include #include #include #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" #include "southbridge/intel/i82801er/i82801er_early_smbus.c" #include "northbridge/intel/e7520/raminit.h" #include "superio/winbond/w83627hf/w83627hf.h" #include "cpu/x86/lapic/boot_cpu.c" #include "cpu/x86/mtrr/earlymtrr.c" #include "debug.c" #include "watchdog.c" #include "reset.c" #include "s2850_fixups.c" #include "superio/winbond/w83627hf/w83627hf_early_init.c" #include "northbridge/intel/e7520/memory_initialized.c" #include "cpu/x86/bist.h" #define SIO_GPIO_BASE 0x680 #define SIO_XBUS_BASE 0x4880 #define CONSOLE_SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) #define HIDDEN_SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP2) #define DEVPRES_CONFIG ( \ DEVPRES_D0F0 | \ DEVPRES_D1F0 | \ DEVPRES_D2F0 | \ DEVPRES_D3F0 | \ DEVPRES_D4F0 | \ DEVPRES_D6F0 | \ 0 ) #define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0) #define RECVENA_CONFIG 0x0808090a #define RECVENB_CONFIG 0x0808090a //void udelay(int usecs) //{ // int i; // for(i = 0; i < usecs; i++) // outb(i&0xff, 0x80); //} #if 0 static void hard_reset(void) { /* enable cf9 */ pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); /* reset */ outb(0x0e, 0x0cf9); } #endif static inline void activate_spd_rom(const struct mem_controller *ctrl) { /* nothing to do */ } static inline int spd_read_byte(unsigned device, unsigned address) { return smbus_read_byte(device, address); } #include "northbridge/intel/e7520/raminit.c" #include "sdram/generic_sdram.c" static void main(unsigned long bist) { /* * * */ static const struct mem_controller mch[] = { { .node_id = 0, .f0 = PCI_DEV(0, 0x00, 0), .f1 = PCI_DEV(0, 0x00, 1), .f2 = PCI_DEV(0, 0x00, 2), .f3 = PCI_DEV(0, 0x00, 3), .channel0 = {(0xa<<3)|3, (0xa<<3)|2, (0xa<<3)|1, (0xa<<3)|0, }, .channel1 = {(0xa<<3)|7, (0xa<<3)|6, (0xa<<3)|5, (0xa<<3)|4, }, } }; if (bist == 0) { /* Skip this if there was a built in self test failure */ early_mtrr_init(); if (memory_initialized()) { asm volatile ("jmp __cpu_reset"); } } /* Setup the console */ outb(0x87,0x2e); outb(0x87,0x2e); pnp_write_config(CONSOLE_SERIAL_DEV, 0x24, 0x84 | (1 << 6)); w83627hf_enable_dev(CONSOLE_SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); /* Halt if there was a built in self test failure */ // report_bist_failure(bist); /* MOVE ME TO A BETTER LOCATION !!! */ /* config LPC decode for flash memory access */ device_t dev; dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0); if (dev == PCI_DEV_INVALID) { die("Missing ich5?"); } pci_write_config32(dev, 0xe8, 0x00000000); pci_write_config8(dev, 0xf0, 0x00); #if 0 display_cpuid_update_microcode(); #endif #if 1 print_pci_devices(); #endif #if 1 enable_smbus(); #endif #if 1 // dump_spd_registers(&cpu[0]); int i; for(i = 0; i < 1; i++) { dump_spd_registers(); } #endif disable_watchdogs(); // dump_ipmi_registers(); mainboard_set_e7520_leds(); // memreset_setup(); sdram_initialize(ARRAY_SIZE(mch), mch); #if 1 dump_pci_devices(); #endif #if 1 dump_pci_device(PCI_DEV(0, 0x00, 0)); dump_bar14(PCI_DEV(0, 0x00, 0)); #endif #if 1 // temporarily disabled /* Check the first 1M */ // ram_check(0x00000000, 0x000100000); // ram_check(0x00000000, 0x000a0000); // ram_check(0x00100000, 0x01000000); ram_check(0x00100000, 0x00100100); /* check the first 1M in the 3rd Gig */ // ram_check(0x30100000, 0x31000000); #endif #if 0 ram_check(0x00000000, 0x02000000); #endif #if 0 while(1) { hlt(); } #endif }