/* SPDX-License-Identifier: GPL-2.0-only */ /* This file is part of the coreboot project. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "memory.h" #include "fw_cfg.h" #include "fw_cfg_if.h" #include "acpi.h" static void qemu_reserve_ports(struct device *dev, unsigned int idx, unsigned int base, unsigned int size, const char *name) { unsigned int end = base + size -1; struct resource *res; printk(BIOS_DEBUG, "QEMU: reserve ioports 0x%04x-0x%04x [%s]\n", base, end, name); res = new_resource(dev, idx); res->base = base; res->size = size; res->limit = 0xffff; res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } static void cpu_pci_domain_set_resources(struct device *dev) { assign_resources(dev->link_list); } static void cpu_pci_domain_read_resources(struct device *dev) { u16 nbid = pci_read_config16(pcidev_on_root(0x0, 0), PCI_DEVICE_ID); int i440fx = (nbid == 0x1237); int q35 = (nbid == 0x29c0); struct resource *res; unsigned long tomk = 0, high; int idx = 10; FWCfgFile f; pci_domain_read_resources(dev); if (!fw_cfg_check_file(&f, "etc/e820") && f.size > 0) { /* supported by qemu 1.7+ */ FwCfgE820Entry *list = malloc(f.size); int i; fw_cfg_get(f.select, list, f.size); for (i = 0; i < f.size / sizeof(*list); i++) { switch (list[i].type) { case 1: /* RAM */ printk(BIOS_DEBUG, "QEMU: e820/ram: 0x%08llx + 0x%08llx\n", list[i].address, list[i].length); if (list[i].address == 0) { tomk = list[i].length / 1024; ram_resource(dev, idx++, 0, 640); ram_resource(dev, idx++, 768, tomk - 768); } else { ram_resource(dev, idx++, list[i].address / 1024, list[i].length / 1024); } break; case 2: /* reserved */ printk(BIOS_DEBUG, "QEMU: e820/res: 0x%08llx +0x%08llx\n", list[i].address, list[i].length); res = new_resource(dev, idx++); res->base = list[i].address; res->size = list[i].length; res->limit = 0xffffffff; res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; break; default: /* skip unknown */ break; } } free(list); } if (!tomk) { /* qemu older than 1.7, or reading etc/e820 failed. Fallback to cmos. */ tomk = qemu_get_memory_size(); high = qemu_get_high_memory_size(); printk(BIOS_DEBUG, "QEMU: cmos: %lu MiB RAM below 4G.\n", tomk / 1024); printk(BIOS_DEBUG, "QEMU: cmos: %lu MiB RAM above 4G.\n", high / 1024); /* Report the memory regions. */ ram_resource(dev, idx++, 0, 640); ram_resource(dev, idx++, 768, tomk - 768); if (high) ram_resource(dev, idx++, 4 * 1024 * 1024, high); } /* Reserve I/O ports used by QEMU */ qemu_reserve_ports(dev, idx++, 0x0510, 0x02, "firmware-config"); qemu_reserve_ports(dev, idx++, 0x5658, 0x01, "vmware-port"); if (i440fx) { qemu_reserve_ports(dev, idx++, 0xae00, 0x10, "pci-hotplug"); qemu_reserve_ports(dev, idx++, 0xaf00, 0x20, "cpu-hotplug"); qemu_reserve_ports(dev, idx++, 0xafe0, 0x04, "piix4-gpe0"); } if (inb(CONFIG_CONSOLE_QEMU_DEBUGCON_PORT) == 0xe9) { qemu_reserve_ports(dev, idx++, CONFIG_CONSOLE_QEMU_DEBUGCON_PORT, 1, "debugcon"); } /* A segment is legacy VGA region */ mmio_resource(dev, idx++, 0xa0000 / KiB, (0xc0000 - 0xa0000) / KiB); /* C segment to 1MB is reserved RAM (low tables) */ reserved_ram_resource(dev, idx++, 0xc0000 / KiB, (1 * MiB - 0xc0000) / KiB); if (q35 && ((tomk * 1024) < 0xb0000000)) { /* * Reserve the region between top-of-ram and the * mmconf xbar (ar 0xb0000000), so coreboot doesn't * place pci bars there. The region isn't declared as * pci io window in the ACPI tables (\_SB.PCI0._CRS). */ res = new_resource(dev, idx++); res->base = tomk * 1024; res->size = 0xb0000000 - tomk * 1024; res->limit = 0xffffffff; res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } if (i440fx) { /* Reserve space for the IOAPIC. This should be in * the southbridge, but I couldn't tell which device * to put it in. */ res = new_resource(dev, 2); res->base = IO_APIC_ADDR; res->size = 0x100000UL; res->limit = 0xffffffffUL; res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } /* Reserve space for the LAPIC. There's one in every processor, but * the space only needs to be reserved once, so we do it here. */ res = new_resource(dev, 3); res->base = LOCAL_APIC_ADDR; res->size = 0x10000UL; res->limit = 0xffffffffUL; res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } #if CONFIG(GENERATE_SMBIOS_TABLES) static int qemu_get_smbios_data16(int handle, unsigned long *current) { struct smbios_type16 *t = (struct smbios_type16 *)*current; int len = sizeof(struct smbios_type16); memset(t, 0, sizeof(struct smbios_type16)); t->type = SMBIOS_PHYS_MEMORY_ARRAY; t->handle = handle; t->length = len - 2; t->location = MEMORY_ARRAY_LOCATION_SYSTEM_BOARD; t->use = MEMORY_ARRAY_USE_SYSTEM; t->memory_error_correction = MEMORY_ARRAY_ECC_NONE; t->maximum_capacity = qemu_get_memory_size(); *current += len; return len; } static int qemu_get_smbios_data17(int handle, int parent_handle, unsigned long *current) { struct smbios_type17 *t = (struct smbios_type17 *)*current; int len; memset(t, 0, sizeof(struct smbios_type17)); t->type = SMBIOS_MEMORY_DEVICE; t->handle = handle; t->phys_memory_array_handle = parent_handle; t->length = sizeof(struct smbios_type17) - 2; t->size = qemu_get_memory_size() / 1024; t->data_width = 64; t->total_width = 64; t->form_factor = 9; /* DIMM */ t->device_locator = smbios_add_string(t->eos, "Virtual"); t->memory_type = 0x12; /* DDR */ t->type_detail = 0x80; /* Synchronous */ t->speed = 200; t->clock_speed = 200; t->manufacturer = smbios_add_string(t->eos, CONFIG_MAINBOARD_VENDOR); len = t->length + smbios_string_table_len(t->eos); *current += len; return len; } static int qemu_get_smbios_data(struct device *dev, int *handle, unsigned long *current) { int len; len = fw_cfg_smbios_tables(handle, current); if (len != 0) return len; len = qemu_get_smbios_data16(*handle, current); len += qemu_get_smbios_data17(*handle+1, *handle, current); *handle += 2; return len; } #endif #if CONFIG(HAVE_ACPI_TABLES) static const char *qemu_acpi_name(const struct device *dev) { if (dev->path.type == DEVICE_PATH_DOMAIN) return "PCI0"; if (dev->path.type != DEVICE_PATH_PCI || dev->bus->secondary != 0) return NULL; return NULL; } #endif static struct device_operations pci_domain_ops = { .read_resources = cpu_pci_domain_read_resources, .set_resources = cpu_pci_domain_set_resources, .scan_bus = pci_domain_scan_bus, #if CONFIG(GENERATE_SMBIOS_TABLES) .get_smbios_data = qemu_get_smbios_data, #endif #if CONFIG(HAVE_ACPI_TABLES) .acpi_name = qemu_acpi_name, #endif }; static void cpu_bus_init(struct device *dev) { initialize_cpus(dev->link_list); } static void cpu_bus_scan(struct device *bus) { int max_cpus = fw_cfg_max_cpus(); struct device *cpu; int i; if (max_cpus < 0) return; /* * TODO: This only handles the simple "qemu -smp $nr" case * correctly. qemu also allows to specify the number of * cores, threads & sockets. */ printk(BIOS_INFO, "QEMU: max_cpus is %d\n", max_cpus); for (i = 0; i < max_cpus; i++) { cpu = add_cpu_device(bus->link_list, i, 1); if (cpu) set_cpu_topology(cpu, 1, 0, i, 0); } } static struct device_operations cpu_bus_ops = { .read_resources = noop_read_resources, .set_resources = noop_set_resources, .init = cpu_bus_init, .scan_bus = cpu_bus_scan, }; static void northbridge_enable(struct device *dev) { /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_DOMAIN) { dev->ops = &pci_domain_ops; } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { dev->ops = &cpu_bus_ops; } } struct chip_operations mainboard_emulation_qemu_i440fx_ops = { CHIP_NAME("QEMU Northbridge i440fx") .enable_dev = northbridge_enable, }; struct chip_operations mainboard_emulation_qemu_q35_ops = { CHIP_NAME("QEMU Northbridge q35") .enable_dev = northbridge_enable, };