# Elpida EDJ2116DEBG 2Gb # 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage # bits[3:0]: 1 = 128 SPD Bytes Used # bits[6:4]: 1 = 256 SPD Bytes Total # bit7 : 0 = CRC covers bytes 0 ~ 125 11 # 1 SPD Revision # 0x10 = Revision 1.0 10 # 2 Key Byte / DRAM Device Type # bits[7:0]: 0x0b = DDR3 SDRAM 0B # 3 Key Byte / Module Type # bits[3:0]: 3 = SO-DIMM # bits[7:4]: reserved 03 # 4 SDRAM CHIP Density and Banks # bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip # bits[6:4]: 0 = 3 (8 banks) # bit7 : reserved 03 # 5 SDRAM Addressing # bits[2:0]: 1 = 10 Column Address Bits # bits[5:3]: 2 = 14 Row Address Bits # bits[7:6]: reserved 11 # 6 Module Nominal Voltage, VDD # bit0 : 0 = 1.5 V operable # bit1 : 0 = NOT 1.35 V operable # bit2 : 0 = NOT 1.25 V operable # bits[7:3]: reserved 00 # 7 Module Organization # bits[2:0]: 2 = 16 bits # bits[5:3]: 0 = 1 Rank # bits[7:6]: reserved 02 # 8 Module Memory Bus Width # bits[2:0]: 3 = Primary bus width is 64 bits # bits[4:3]: 0 = 0 bits (no bus width extension) # bits[7:5]: reserved 03 # 9 Fine Timebase (FTB) Dividend / Divisor # bits[3:0]: 0x02 divisor # bits[7:4]: 0x05 dividend # 5 / 2 = 2.5ps 52 # 10 Medium Timebase (MTB) Dividend # 11 Medium Timebase (MTB) Divisor # 1 / 8 = .125 ns - used for clock freq of 400 through 1066 MHz 01 08 # 12 SDRAM Minimum Cycle Time (tCKmin) # 0x0a = tCKmin of 1.25 ns = DDR3-1600 (800 MHz clock) # 0x0c = tCKmin of 1.25 ns = DDR3-1333 (667 MHz clock) 0C # 13 Reserved 00 # 14 CAS Latencies Supported, Least Significant Byte # 0xfc = CL 6,7,8,9,10,11 # 0xfe = CL 5,6,7,8,9,10,11 # 15 CAS Latencies Supported, Most Significant Byte # Cas Latencies of 11 - 5 are supported FC 00 # 16 Minimum CAS Latency Time (tAAmin) # 0x69 = 13.125ns # 0x6E = 13.75ns - DDR3-1600K 69 # 17 Minimum Write Recovery Time (tWRmin) # 0x78 = tWR of 15ns - All DDR3 speed grades 78 # 18 Minimum RAS# to CAS# Delay Time (tRCDmin) # 0x69 = 13.125ns # 0x6E = 13.75ns - DDR3-1600K 69 # 19 Minimum Row Active to Row Active Delay Time (tRRDmin) # 0x38 = 7.0ns # 0x3C = 7.5ns 38 # 20 Minimum Row Precharge Delay Time (tRPmin) # 0x69 = 13.125ns - # 0x6E = 13.75ns - DDR3-1600K 69 # 21 Upper Nibbles for tRAS and tRC # bits[3:0]: tRAS most significant nibble = 1 (see byte 22) # bits[7:4]: tRC most significant nibble = 1 (see byte 23) 11 # 22 Minimum Active to Precharge Delay Time (tRASmin), LSB # 0x118 = 35ns - DDR3-1600 (see byte 21) # 0x120 = 36ns - DDR3 20 # 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB # 0x186 = 48.75ns - DDR3-1600K # 0x189 = 49.125ns - DDR3- 89 # 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB # 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB # 0x500 = 160ns - for 2 Gigabit chips 00 05 # 26 Minimum Internal Write to Read Command Delay Time (tWTRmin) # 0x3c = 7.5 ns - All DDR3 SDRAM speed bins 3C # 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin) # 0x3c = 7.5ns - All DDR3 SDRAM speed bins 3C # 28 Upper Nibble for tFAWmin # 29 Minimum Four Activate Window Delay Time (tFAWmin) # 0x0140 = 40ns - DDR3-1600, 2 KB page size # 0x0168 = 45ns - DDR3- , 2 KB page size 01 68 # 30 SDRAM Optional Feature # bit0 : 1= RZQ/6 supported # bit1 : 1 = RZQ/7 supported # bits[6:2]: reserved # bit7 : 1 = DLL Off mode supported 83 # 31 SDRAM Thermal and Refresh Options # bit0 : 1 = Temp up to 95c supported # bit1 : 0 = 85-95c uses 2x refresh rate # bit2 : 1 = Auto Self Refresh supported # bit3 : 0 = no on die thermal sensor # bits[6:4]: reserved # bit7 : 0 = partial self refresh supported 05 # 32 Module Thermal Sensor # 0 = Thermal sensor not incorporated onto this assembly 00 # 33 SDRAM Device Type # bits[1:0]: 0 = Signal Loading not specified # bits[3:2]: reserved # bits[6:4]: 0 = Die count not specified # bit7 : 0 = Standard Monolithic DRAM Device 00 # 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin) 00 # 35 Fine Offset for Minimum CAS Latency Time (tAAmin) 00 # 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin) 00 # 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin) 00 # 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin) 00 # 39 (reserved) 00 # 40 - 47 (reserved) 00 00 00 00 00 00 00 00 # 48 - 55 (reserved) 00 00 00 00 00 00 00 00 # 56 - 59 (reserved) 00 00 00 00 # 60 Raw Card Extension, Module Nominal Height # bits[4:0]: 0 = <= 15mm tall # bits[7:5]: 0 = raw card revision 0-3 00 # 61 Module Maximum Thickness # bits[3:0]: 0 = thickness front <= 1mm # bits[7:4]: 0 = thinkness back <= 1mm 00 # 62 Reference Raw Card Used # bits[4:0]: 0 = Reference Raw card A used # bits[6:5]: 0 = revision 0 # bit7 : 0 = Reference raw cards A through AL 00 # 63 Address Mapping from Edge Connector to DRAM # bit0 : 0 = standard mapping (not mirrored) # bits[7:1]: reserved 00 # 64 - 71 (reserved) 00 00 00 00 00 00 00 00 # 72 - 79 (reserved) 00 00 00 00 00 00 00 00 # 80 - 87 (reserved) 00 00 00 00 00 00 00 00 # 88 - 95 (reserved) 00 00 00 00 00 00 00 00 # 96 - 103 (reserved) 00 00 00 00 00 00 00 00 # 104 - 111 (reserved) 00 00 00 00 00 00 00 00 # 112 - 116 (reserved) 00 00 00 00 00 # 117 - 118 Module ID: Module Manufacturers JEDEC ID Code # 0x0001 = AMD 00 01 # 119 Module ID: Module Manufacturing Location - OEM specified 00 # 120 Module ID: Module Manufacture Year in BCD # 0x13 = 2013 13 # 121 Module ID: Module Manufacture week # 0x12 = 12th week 12 # 122 - 125: Module Serial Number 53 41 47 45 # 126 - 127: Cyclical Redundancy Code 9D A6