/* * This file is part of the coreboot project. * * Copyright 2018 Google LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #define SKU_UNKNOWN 0xFFFFFFFF static const struct pad_config default_override_table[] = { PAD_NC(GPIO_52, UP_20K), PAD_NC(GPIO_53, UP_20K), PAD_NC(GPIO_67, UP_20K), PAD_NC(GPIO_117, UP_20K), PAD_NC(GPIO_143, UP_20K), /* EN_PP3300_TOUCHSCREEN */ PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0, DISPUPD), PAD_NC(GPIO_161, DN_20K), /* EN_PP3300_WLAN_L */ PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_178, 0, DEEP, NONE, Tx0RxDCRx0, DISPUPD), PAD_NC(GPIO_213, DN_20K), PAD_NC(GPIO_214, DN_20K), }; static const struct pad_config sku1_default_override_table[] = { /* disable I2C7 SCL and SDA */ PAD_NC(GPIO_114, UP_20K), /* LPSS_I2C7_SDA */ PAD_NC(GPIO_115, UP_20K), /* LPSS_I2C7_SCL */ PAD_NC(GPIO_52, UP_20K), PAD_NC(GPIO_53, UP_20K), PAD_NC(GPIO_67, UP_20K), PAD_NC(GPIO_117, UP_20K), PAD_NC(GPIO_143, UP_20K), /* EN_PP3300_TOUCHSCREEN */ PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0, DISPUPD), PAD_NC(GPIO_161, DN_20K), /* EN_PP3300_WLAN_L */ PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_178, 0, DEEP, NONE, Tx0RxDCRx0, DISPUPD), PAD_NC(GPIO_213, DN_20K), PAD_NC(GPIO_214, DN_20K), }; static const struct pad_config bid0_override_table[] = { PAD_NC(GPIO_52, UP_20K), PAD_NC(GPIO_53, UP_20K), PAD_NC(GPIO_67, UP_20K), PAD_NC(GPIO_117, UP_20K), PAD_NC(GPIO_143, UP_20K), PAD_NC(GPIO_161, DN_20K), PAD_NC(GPIO_214, DN_20K), }; const struct pad_config *variant_override_gpio_table(size_t *num) { const struct pad_config *c; uint32_t sku_id = SKU_UNKNOWN; switch (board_id()) { case 0: case UNDEFINED_STRAPPING_ID: c = bid0_override_table; *num = ARRAY_SIZE(bid0_override_table); break; default: google_chromeec_cbi_get_sku_id(&sku_id); if (sku_id == 1) { c = sku1_default_override_table; *num = ARRAY_SIZE(sku1_default_override_table); } else { c = default_override_table; *num = ARRAY_SIZE(default_override_table); } } return c; } /* GPIOs needed prior to ramstage. */ static const struct pad_config early_gpio_table[] = { /* PCH_WP_OD */ PAD_CFG_GPI(GPIO_190, NONE, DEEP), /* H1_PCH_INT_ODL */ PAD_CFG_GPI_APIC_IOS(GPIO_63, NONE, DEEP, LEVEL, INVERT, TxDRxE, DISPUPD), /* H1_SLAVE_SPI_CLK_R */ PAD_CFG_NF(GPIO_79, NONE, DEEP, NF1), /* H1_SLAVE_SPI_CS_L_R */ PAD_CFG_NF(GPIO_80, NONE, DEEP, NF1), /* H1_SLAVE_SPI_MISO */ PAD_CFG_NF(GPIO_82, NONE, DEEP, NF1), /* H1_SLAVE_SPI_MOSI_R */ PAD_CFG_NF(GPIO_83, NONE, DEEP, NF1), /* WLAN_PE_RST */ PAD_CFG_GPO(GPIO_164, 0, DEEP), /* * ESPI_IO1 acts as ALERT# (which is open-drain) and requies a weak * pull-up for proper operation. Since there is no external pull present * on this platform, configure an internal weak pull-up. */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_151, UP_20K, DEEP, NF2, HIZCRx1, ENPU), }; const struct pad_config *variant_early_gpio_table(size_t *num) { /* * This is a hack to configure EN_PP3300_WLAN based on board id. Once * board id 0 is deprecated, we can get rid of this. */ uint32_t bid = board_id(); if (bid == UNDEFINED_STRAPPING_ID || bid < 1) gpio_output(GPIO_178, 1); else gpio_output(GPIO_178, 0); *num = ARRAY_SIZE(early_gpio_table); return early_gpio_table; }