/* SPDX-License-Identifier: GPL-2.0-only */ #include "ec.h" #include #include #include #include #include #include static const u8 mainboard_picr_data[0x54] = { 0x1F, 0x1f, 0x1f, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x0A, 0xF1, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x09, 0x1F, 0x1F, 0x0B, 0x1F, 0x0B, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F }; static const u8 mainboard_intr_data[0x54] = { 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x09, 0x1F, 0x1F, 0x10, 0x1F, 0x10, 0x1F, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0x11, 0x12, 0x11, 0x12, 0x11, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x11, 0x12, 0x13 }; static void pavilion_cold_boot_init(void) { /* Lid SMI is only used in non-ACPI mode; leave it off in S3 resume */ hudson_configure_gevent_smi(EC_LID_GEVENT, SMI_MODE_SMI, SMI_LVL_LOW); /* EC is not powered off during S3 sleep */ pavilion_m6_1035dx_ec_init(); } /* PIRQ Setup */ static void pirq_setup(void) { intr_data_ptr = mainboard_intr_data; picr_data_ptr = mainboard_picr_data; } static void mainboard_enable(struct device *dev) { pirq_setup(); hudson_configure_gevent_smi(EC_SMI_GEVENT, SMI_MODE_SMI, SMI_LVL_HIGH); global_smi_enable(); if (!acpi_is_wakeup_s3()) pavilion_cold_boot_init(); } struct chip_operations mainboard_ops = { .enable_dev = mainboard_enable, };