/* * This file is part of the coreboot project. * * Copyright (C) 2016-2017 Intel Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include "reg_access.h" #include "gen1.h" #include "gen2.h" void car_mainboard_pre_console_init(void) { const struct reg_script *script; /* Initialize the GPIO controllers */ if (IS_ENABLED(CONFIG_GALILEO_GEN2)) script = gen2_gpio_init; else script = gen1_gpio_init; reg_script_run(script); /* Initialize the RXD and TXD paths for UART0 */ if (IS_ENABLED(CONFIG_ENABLE_BUILTIN_HSUART0)) { if (IS_ENABLED(CONFIG_GALILEO_GEN2)) script = gen2_hsuart0; else script = (reg_legacy_gpio_read( R_QNC_GPIO_RGLVL_RESUME_WELL) & GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO) ? gen1_hsuart0_0x20 : gen1_hsuart0_0x21; reg_script_run(script); } } void mainboard_gpio_i2c_init(device_t dev) { const struct reg_script *script; printk(BIOS_INFO, "Galileo I2C chip initialization\n"); /* Determine the correct script for the board */ if (IS_ENABLED(CONFIG_GALILEO_GEN2)) script = gen2_i2c_init; else /* Determine which I2C address is in use */ script = (reg_legacy_gpio_read(R_QNC_GPIO_RGLVL_RESUME_WELL) & GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO) ? gen1_i2c_0x20_init : gen1_i2c_0x21_init; /* Initialize the I2C chips */ reg_script_run(script); } void mainboard_gpio_pcie_reset(uint32_t pin_value) { uint32_t pin_number; uint32_t value; /* Determine the correct PCIe reset pin */ if (IS_ENABLED(CONFIG_GALILEO_GEN2)) pin_number = GEN2_PCI_RESET_RESUMEWELL_GPIO; else pin_number = GEN1_PCI_RESET_RESUMEWELL_GPIO; /* Update the PCIe reset value */ value = reg_legacy_gpio_read(R_QNC_GPIO_RGLVL_RESUME_WELL); value = (value & ~(1 << pin_number)) | ((pin_value & 1) << pin_number); reg_legacy_gpio_write(R_QNC_GPIO_RGLVL_RESUME_WELL, value); }