#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, # 1: the system allows a PCIE link to be established on Dev2 or Dev3. #Define gfx_dual_slot, 0: single slot, 1: dual slot #Define gfx_lane_reversal, 0: disable lane reversal, 1: enable #Define gfx_tmds, 0: didn't support TMDS, 1: support #Define gfx_compliance, 0: didn't support compliance, 1: support #Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration #Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 chip northbridge/amd/amdk8/root_complex device apic_cluster 0 on chip cpu/amd/socket_S1G1 device apic 0 on end end end device pci_domain 0 on chip northbridge/amd/amdk8 device pci 18.0 on # southbridge chip southbridge/amd/rs690 device pci 0.0 on end # HT 0x7910 device pci 1.0 on # Internal Graphics P2P bridge 0x7912 chip drivers/pci/onboard device pci 5.0 on end # Internal Graphics 0x791F end end device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 device pci 3.0 off end # PCIE P2P bridge 0x791b device pci 4.0 on end # PCIE P2P bridge 0x7914 device pci 5.0 on end # PCIE P2P bridge 0x7915 device pci 6.0 on end # PCIE P2P bridge 0x7916 device pci 7.0 on end # PCIE P2P bridge 0x7917 device pci 8.0 off end # NB/SB Link P2P bridge register "gpp_configuration" = "4" register "port_enable" = "0xfc" register "gfx_dev2_dev3" = "1" register "gfx_dual_slot" = "0" register "gfx_lane_reversal" = "0" register "gfx_tmds" = "0" register "gfx_compliance" = "0" register "gfx_reconfiguration" = "1" register "gfx_link_width" = "0" end chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus device pci 12.0 on end # SATA 0x4380 device pci 13.0 on end # USB 0x4387 device pci 13.1 on end # USB 0x4388 device pci 13.2 on end # USB 0x4389 device pci 13.3 on end # USB 0x438a device pci 13.4 on end # USB 0x438b device pci 13.5 on end # USB 2 0x4386 device pci 14.0 on # SM 0x4385 chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end chip drivers/generic/generic #dimm 0-0-1 device i2c 51 on end end chip drivers/generic/generic #dimm 0-1-0 device i2c 52 on end end chip drivers/generic/generic #dimm 0-1-1 device i2c 53 on end end end # SM device pci 14.1 on end # IDE 0x438c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x438d chip superio/winbond/w83627dhg device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end device pnp 2e.3 on # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end #device pnp 2e.6 off # SPI #end device pnp 2e.7 off # GPIO end device pnp 2e.8 on # WDTO#, PLED end device pnp 2e.9 off # GPIO end device pnp 2e.a off # ACPI end device pnp 2e.b on # HWM io 0x60 = 0xa10 end device pnp 2e.c off # PECI, SST end end #superio/winbond/w83627dhg #chip superio/smsc/fdc37n972 # seems this chip is not used? #end end #LPC device pci 14.4 on end # PCI 0x4384 device pci 14.5 on end # ACI 0x4382 device pci 14.6 on end # MCI 0x438e register "ide0_enable" = "1" register "sata0_enable" = "1" register "hda_viddid" = "0x10ec0888" end #southbridge/amd/sb600 end # device pci 18.0 device pci 18.0 on end device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end #northbridge/amd/amdk8 end #pci_domain end #northbridge/amd/amdk8/root_complex