/* * This file is part of the coreboot project. * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2011 Sven Schnelle * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA */ #include #include #include #include #include #include #include "chip.h" #include #include #include #include #include #include static void backlight_enable(void) { pmh7_register_set_bit(0x50, 5); } static void trackpoint_enable(void) { ec_write(0x0b, 0x03); } static void wlan_enable(void) { ec_write(0x3a, 0x20); } static void mainboard_enable(device_t dev) { unsigned char ecfw[9], c; u16 fwvh, fwvl; device_t dev0; int i; for(i = 0; i < 8; i++) { c = ec_read(0xf0 + i); if (c < 0x20 || c > 0x7f) break; ecfw[i] = c; } ecfw[i] = '\0'; fwvh = ec_read(0xe9); fwvl = ec_read(0xe8); printk(BIOS_INFO, "EC Firmware ID %s, Version %d.%d%d%c\n", ecfw, fwvh >> 4, fwvh & 0x0f, fwvl >> 4, 0x41 + (fwvl & 0xf)); backlight_enable(); trackpoint_enable(); /* FIXME: this should be ACPI's task * but for now, enable it here */ wlan_enable(); /* enable ACPI events */ ec_write(0x00, 0xa6); ec_write(0x01, 0x05); ec_write(0x02, 0xa0); ec_write(0x03, 0x05); /* set mask of enabled beeps */ ec_write(0x04, 0xfe); ec_write(0x05, 0x96); /* Unknown, but required for hotkeys Maybe a mask for enabled keys? */ ec_write(0x12, 0xff); ec_write(0x13, 0xff); ec_write(0x14, 0xf4); ec_write(0x15, 0x3c); /* enable Audio */ ec_clr_bit(0x3a, 0); /* If we're resuming from suspend, blink suspend LED */ dev0 = dev_find_slot(0, PCI_DEVFN(0,0)); if (dev0 && pci_read_config32(dev0, SKPAD) == 0xcafed00d) ec_write(0x0c, 0xc7); } struct chip_operations mainboard_ops = { CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER) .enable_dev = mainboard_enable, };