/* * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "cpu/x86/bist.h" #include #include "cpu/x86/lapic.h" #include #include #include "SBPLATFORM.h" #include "cbmem.h" #include "cpu/amd/mtrr.h" #include "cpu/amd/agesa/s3_resume.h" #define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1) void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { u32 val; /* * All cores: allow caching of flash chip code and data * (there are no cache-as-ram reliability concerns with family 14h) */ __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ __writemsr (0xc0010062, 0); agesawrapper_amdinitmmio(); if (!cpu_init_detectedx && boot_cpu()) { post_code(0x30); sb_Poweron_Init(); post_code(0x31); smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); } /* Halt if there was a built in self test failure */ post_code(0x34); report_bist_failure(bist); /* Load MPB */ val = cpuid_eax(1); printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); post_code(0x37); agesawrapper_amdinitreset(); post_code(0x39); agesawrapper_amdinitearly(); int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); if (!s3resume) { post_code(0x40); /* Reboots with outb(3,0x92), outb(4,0xcf9) or triple-fault all * hang, looks like DRAM re-init goes wrong, don't know why. */ val = agesawrapper_amdinitpost(); if (val == 7) /* fatal, amdinitenv below is going to hang */ outb(0x06, 0x0cf9); /* reset system harder instead */ post_code(0x42); agesawrapper_amdinitenv(); } else { /* S3 detect */ printk(BIOS_INFO, "S3 detected\n"); post_code(0x60); agesawrapper_amdinitresume(); agesawrapper_amds3laterestore(); post_code(0x61); prepare_for_resume(); } post_code(0x50); copy_and_run(); printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); post_code(0x54); /* Should never see this post code. */ }