# # This file is part of the coreboot project. # # # SPDX-License-Identifier: GPL-2.0-only chip northbridge/amd/agesa/family14/root_complex device cpu_cluster 0 on chip cpu/amd/agesa/family14 device lapic 0 on end end end device domain 0 on subsystemid 0x1022 0x1510 inherit chip northbridge/amd/agesa/family14 device pci 0.0 on end # Root Complex device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] #device pci 1.1 on end # Internal HDMI Audio device pci 4.0 on end # PCIE P2P bridge device pci 5.0 on end # PCIE P2P bridge device pci 6.0 on end # PCIE P2P bridge device pci 7.0 on end # PCIE P2P bridge on-board NIC device pci 8.0 off end # NB/SB Link P2P bridge end # agesa northbridge chip southbridge/amd/cimx/sb800 device pci 11.0 on end # SATA device pci 12.0 on end # OHCI USB 0-4 device pci 12.2 on end # EHCI USB 0-4 device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d chip superio/winbond/w83627dhg device pnp 4e.0 off end # Floppy device pnp 4e.1 off end # Parallel Port device pnp 4e.2 on # COM1 io 0x60 = 0x3f8 irq 0x70 = 4 end device pnp 4e.3 on # COM2 io 0x60 = 0x2f8 irq 0x70 = 3 end device pnp 4e.5 on # Keyboard, Mouse io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 irq 0x72 = 12 end #device pnp 4e.6 off end # SPI device pnp 4e.307 off end # GPIO6 device pnp 4e.8 off end # WDTO, PLED device pnp 4e.009 off end # GPIO2 device pnp 4e.109 off end # GPIO3 device pnp 4e.209 off end # GPIO4 device pnp 4e.309 off end # GPIO5 device pnp 4e.A off end # ACPI device pnp 4e.B off end # HW Monitor end # w83627dhg end #LPC device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} device pci 14.5 off end # OHCI FS/LS USB device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) device pci 15.0 on end # PCIe PortA device pci 15.1 on end # PCIe PortB device pci 15.2 on end # PCIe PortC device pci 15.3 on end # PCIe PortD device pci 16.0 off end # OHCI USB 10-13 device pci 16.2 off end # EHCI USB 10-13 register "gpp_configuration" = "4" #1:1:1:1 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 chip northbridge/amd/agesa/family14 # These seem unnecessary device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end device pci 18.5 on end device pci 18.6 on end device pci 18.7 on end register "spdAddrLookup" = " { { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses }" end # agesa northbridge end #domain end #northbridge/amd/agesa/family14/root_complex