chip soc/intel/skylake
# Enable deep Sx states
register "deep_s3_enable_ac" = "0"
register "deep_s3_enable_dc" = "0"
register "deep_s5_enable_ac" = "1"
register "deep_s5_enable_dc" = "1"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_C"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
# Enable DPTF
register "dptf_enable" = "1"
# FSP Configuration
register "ProbelessTrace" = "0"
register "EnableLan" = "0"
register "EnableSata" = "1"
register "SataSalpSupport" = "0"
register "SataMode" = "0"
register "SataPortsEnable[0]" = "1"
register "SataPortsEnable[2]" = "1"
register "EnableAzalia" = "1"
register "DspEnable" = "0"
register "IoBufferOwnership" = "0"
register "EnableTraceHub" = "0"
register "XdciEnable" = "0"
register "SsicPortEnable" = "0"
register "SmbusEnable" = "1"
register "Cio2Enable" = "0"
register "ScsEmmcEnabled" = "0"
register "ScsEmmcHs400Enabled" = "0"
register "ScsSdCardEnabled" = "0"
register "IshEnable" = "0"
register "PttSwitch" = "0"
register "InternalGfx" = "1"
register "SkipExtGfxScan" = "1"
register "Device4Enable" = "1"
register "HeciEnabled" = "0"
register "FspSkipMpInit" = "1"
register "SaGv" = "3"
register "SerialIrqConfigSirqEnable" = "1"
register "PmConfigSlpS3MinAssert" = "2" # 50ms
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "PmConfigSlpAMinAssert" = "3" # 2s
register "PmTimerDisabled" = "0"
register "pirqa_routing" = "PCH_IRQ11"
register "pirqb_routing" = "PCH_IRQ10"
register "pirqc_routing" = "PCH_IRQ11"
register "pirqd_routing" = "PCH_IRQ11"
register "pirqe_routing" = "PCH_IRQ11"
register "pirqf_routing" = "PCH_IRQ11"
register "pirqg_routing" = "PCH_IRQ11"
register "pirqh_routing" = "PCH_IRQ11"
# VR Settings Configuration for 5 Domains
#+----------------+-------+-------+-------------+-------------+-------+
#| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
#+----------------+-------+-------+-------------+-------------+-------+
#| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
#| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
#| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
#| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
#| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
#| ImonSlope | 0 | 0 | 0 | 0 | 0 |
#| ImonOffset | 0 | 0 | 0 | 0 | 0 |
#| IccMax | 7A | 34A | 34A | 35A | 35A |
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V |
#+----------------+-------+-------+-------------+-------------+-------+
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(4),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(7),
.voltage_limit = 1520,
}"
register "domain_vr_config[VR_IA_CORE]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(34),
.voltage_limit = 1520,
}"
register "domain_vr_config[VR_RING]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(34),
.voltage_limit = 1520,
}"
register "domain_vr_config[VR_GT_UNSLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(35),
.voltage_limit = 1520,
}"
register "domain_vr_config[VR_GT_SLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(35),
.voltage_limit = 1520,
}"
# Enable Root Ports 5 and 9
register "PcieRpEnable[4]" = "1"
register "PcieRpEnable[8]" = "1"
# Enable CLKREQ# for RP9
register "PcieRpClkReqSupport[8]" = "1"
# ClkReq for NVMe - Bruteforced (no other value works)
register "PcieRpClkReqNumber[8]" = "2"
register "usb2_ports[0]" = "USB2_PORT_LONG(OC_SKIP)" # Type-C Port
register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port (right)
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[3]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port (left)
register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # SD
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port (right)
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port
# PL2 override 25W
register "tdp_pl2_override" = "25"
# Send an extra VR mailbox command for the PS4 exit issue
register "SendVrMbxCmd" = "2"
# Lock Down
register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT"
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 14.0 on end # USB xHCI
device pci 14.1 on end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 on end # SATA
device pci 1c.0 on end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 on end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1f.0 on
chip ec/purism/librem
device pnp 0c09.0 on end
end
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end