/* SPDX-License-Identifier: GPL-2.0-only */ /* This file is part of the coreboot project. */ #include #include #include #include #include #include "m3885.h" #define DUMP_RUNTIME_REGISTERS 0 static void backlight_enable(void) { printk(BIOS_DEBUG, "Display I/O: 0x%02x\n", inb(0x60f)); } #if DUMP_RUNTIME_REGISTERS static void dump_runtime_registers(void) { int i; printk(BIOS_DEBUG, "SuperIO runtime register block:\n"); for (i = 0; i < 0x10; i++) printk(BIOS_DEBUG, "%02x ", i); printk(BIOS_DEBUG, "\n"); for (i = 0; i < 0x10; i++) printk(BIOS_DEBUG, "%02x ", inb(0x600 +i)); printk(BIOS_DEBUG, "\n"); } #endif static void mainboard_final(struct device *dev) { /* Enable Dummy DCC ON# for DVI */ printk(BIOS_DEBUG, "Laptop handling...\n"); outb(inb(0x60f) & ~(1 << 5), 0x60f); } static void mainboard_enable(struct device *dev) { /* Configure the MultiKey controller */ /* Enable LCD Backlight */ backlight_enable(); /* Disable Dummy DCC -> GP45 = 1 */ outb(inb(0x60f) | (1 << 5), 0x60f); /* LCD panel type is SIO GPIO40-43 */ install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 3); #if DUMP_RUNTIME_REGISTERS dump_runtime_registers(); #endif dev->ops->final = mainboard_final; } struct chip_operations mainboard_ops = { .enable_dev = mainboard_enable, };