##
## Compute the location and size of where this firmware image
## (linuxBIOS plus bootloader) will live in the boot rom chip.
##
if USE_FALLBACK_IMAGE
	default ROM_SECTION_SIZE   = FALLBACK_SIZE
	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
else
	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
	default ROM_SECTION_OFFSET = 0
end

##
## Compute the start location and size size of
## The linuxBIOS bootloader.
##
default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)

##
## Compute where this copy of linuxBIOS will start in the boot rom
##
default _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )

##
## Compute a range of ROM that can cached to speed up linuxBIOS,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
##
default XIP_ROM_SIZE=65536
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )

arch i386 end 

##
## Build the objects we have code for in this directory.
##

driver mainboard.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o

##
## Romcc output
##
makerule ./failover.E
	depends "$(MAINBOARD)/failover.c" 
	action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
end

makerule ./failover.inc
	depends "./failover.E ./romcc"
	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
end

makerule ./auto.E 
	depends	"$(MAINBOARD)/auto.c option_table.h " 
	action	"$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
end
makerule ./auto.inc 
	depends "./auto.E ./romcc"
	action	"./romcc -mcpu=k8 -O2 ./auto.E > auto.inc"
end

##
## Build our 16 bit and 32 bit linuxBIOS entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds

##
## Build our reset vector (This is where linuxBIOS is entered)
##
if USE_FALLBACK_IMAGE 
	mainboardinit cpu/x86/16bit/reset16.inc 
	ldscript /cpu/x86/16bit/reset16.lds 
else
	mainboardinit cpu/x86/32bit/reset32.inc 
	ldscript /cpu/x86/32bit/reset32.lds 
end

### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc

##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds

###
### This is the early phase of linuxBIOS startup 
### Things are delicate and we test to see if we should
### failover to another image.
###
if USE_FALLBACK_IMAGE
	ldscript /arch/i386/lib/failover.lds 
	mainboardinit ./failover.inc
end

###
### O.k. We aren't just an intermediary anymore!
###

##
## Setup RAM
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
mainboardinit cpu/x86/mmx/enable_mmx.inc
mainboardinit cpu/x86/sse/enable_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/sse/disable_sse.inc
mainboardinit cpu/x86/mmx/disable_mmx.inc

##
## Include the secondary Configuration files 
##
dir /pc80
config chip.h

# sample config for tyan/s2850
chip northbridge/amd/amdk8
	device pci_domain 0 on
		device pci 18.0 on # LDT0
			#  devices on link 2, link 2 == LDT 2
			chip southbridge/amd/amd8111
				# this "device pci 0.0" is the parent the next one
				# PCI bridge
				device pci 0.0 on
					device pci 0.0 on end
					device pci 0.1 on end
					device pci 0.2 off end
					device pci 1.0 off end
				end
				device pci 1.0 on
					chip superio/winbond/w83627hf
						device pnp 2e.0 on #  Floppy
                                 			io 0x60 = 0x3f0
                                			irq 0x70 = 6
                                			drq 0x74 = 2
						end
                        			device pnp 2e.1 off #  Parallel Port
                                 			io 0x60 = 0x378
                                			irq 0x70 = 7
						end
                        			device pnp 2e.2 on #  Com1
                                 			io 0x60 = 0x3f8
                                			irq 0x70 = 4
						end
                        			device pnp 2e.3 off #  Com2
                                 			io 0x60 = 0x2f8
                                			irq 0x70 = 3
						end
                        			device pnp 2e.5 on #  Keyboard
                                 			io 0x60 = 0x60
                                 			io 0x62 = 0x64
                                			irq 0x70 = 1
							irq 0x72 = 12
						end
                        			device pnp 2e.6 off end #  CIR
                        			device pnp 2e.7 off end #  GAME_MIDI_GIPO1
                        			device pnp 2e.8 off end #  GPIO2
                        			device pnp 2e.9 off end #  GPIO3
                        			device pnp 2e.a off end #  ACPI
                        			device pnp 2e.b on #  HW Monitor
 				 			io 0x60 = 0x290
                				end
					end
				end
				device pci 1.1 on end
				device pci 1.2 on end
				device pci 1.3 on end
				device pci 1.5 on end
				device pci 1.6 off end
			end
		end #  device pci 18.0 

                device pci 18.0 on end
                device pci 18.0 on end
		
		device pci 18.1 on end
		device pci 18.2 on end
		device pci 18.3 on end

	end 
	device apic_cluster 0 on
		chip cpu/amd/socket_940
			device apic 0 on end
		end
	end
end