uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
uses MAINBOARD
uses ARCH
uses HARD_RESET_BUS
uses HARD_RESET_DEVICE
uses HARD_RESET_FUNCTION

#
#
###
### Set all of the defaults for an x86 architecture
###
#
#
###
### Build the objects we have code for in this directory.
###
##object mainboard.o
config chip.h
register "fixup_scsi" = "1" 
#register "fixup_vga" = "1"


##
## Move the default LinuxBIOS cmos range off of AMD RTC registers
##
default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123

driver mainboard.o
dir ../common/lsi_scsi
#driver adaptec_scsi.o
#driver si_sata.o
#driver intel_nic.o
#object reset.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#
default HARD_RESET_BUS=1
default HARD_RESET_DEVICE=4
default HARD_RESET_FUNCTION=0
#
arch i386 end
#cpu k8 end
#
###
### Build our 16 bit and 32 bit linuxBIOS entry code
###
mainboardinit cpu/i386/entry16.inc
mainboardinit cpu/i386/entry32.inc
mainboardinit cpu/i386/bist32.inc
ldscript /cpu/i386/entry16.lds
ldscript /cpu/i386/entry32.lds
#
###
### Build our reset vector (This is where linuxBIOS is entered)
###
if USE_FALLBACK_IMAGE 
	mainboardinit cpu/i386/reset16.inc 
	ldscript /cpu/i386/reset16.lds 
else
	mainboardinit cpu/i386/reset32.inc 
	ldscript /cpu/i386/reset32.lds 
end
#
#### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
#
###
### Include an id string (For safe flashing)
###
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
#
####
#### This is the early phase of linuxBIOS startup 
#### Things are delicate and we test to see if we should
#### failover to another image.
####
#option MAX_REBOOT_CNT=2
if USE_FALLBACK_IMAGE
  ldscript /arch/i386/lib/failover.lds 
end
#
###
### Setup our mtrrs
###
mainboardinit cpu/k8/earlymtrr.inc
###
### Only the bootstrap cpu makes it here.
### Failover if we need to 
###
#
if USE_FALLBACK_IMAGE
  mainboardinit ./failover.inc
end

#
#
###
### Setup the serial port
###
mainboardinit pc80/serial.inc
mainboardinit arch/i386/lib/console.inc
mainboardinit cpu/i386/bist32_fail.inc
#
####
#### O.k. We aren't just an intermediary anymore!
####
#
###
### Romcc output
###
#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc"
#mainboardinit .failover.inc

makerule ./failover.E
	depends "$(MAINBOARD)/failover.c" 
	action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
end

makerule ./failover.inc
	depends "./romcc ./failover.E"
	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end

makerule ./auto.E 
        depends "$(MAINBOARD)/auto.c option_table.h"
        action  "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
end
makerule ./auto.inc 
	depends "./romcc ./auto.E"
	action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" 
end
mainboardinit cpu/k8/enable_mmx_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc
#
###
### Include the secondary Configuration files 
###
northbridge amd/amdk8 "mc0"
        pci 0:18.0
        pci 0:18.0
        pci 0:18.0
        pci 0:18.1
        pci 0:18.2
        pci 0:18.3
        southbridge amd/amd8131 "amd8131" link 1
                pci 0:0.0
                pci 0:0.1
                pci 0:1.0
                pci 0:1.1
	end
        southbridge amd/amd8111 "amd8111" link 1
                pci 0:0.0
                pci 0:1.0 on
                pci 0:1.1 on
                pci 0:1.2 on
                pci 0:1.3 on
                pci 0:1.5 off
                pci 0:1.6 off
                pci 1:0.0 on
                pci 1:0.1 on
                pci 1:0.2 on
                pci 1:1.0 off
                superio winbond/w83627hf link 1
                        pnp 2e.0 off #  Floppy
                                 io 0x60 = 0x3f0
                                irq 0x70 = 6
                                drq 0x74 = 2
                        pnp 2e.1 off #  Parallel Port
                                 io 0x60 = 0x378
                                irq 0x70 = 7
                        pnp 2e.2 on #  Com1
                                 io 0x60 = 0x3f8
                                irq 0x70 = 4
                        pnp 2e.3 off #  Com2
                                 io 0x60 = 0x2f8
                                irq 0x70 = 3
                        pnp 2e.5 on #  Keyboard
                                 io 0x60 = 0x60
                                 io 0x62 = 0x64
                                irq 0x70 = 1
                        pnp 2e.6 off #  CIR
                        pnp 2e.7 off #  GAME_MIDI_GIPO1
                        pnp 2e.8 off #  GPIO2
                        pnp 2e.9 off #  GPIO3
                        pnp 2e.a off #  ACPI
                        pnp 2e.b off #  HW Monitor
                end
        end
end

northbridge amd/amdk8 "mc1"
        pci 0:19.0
        pci 0:19.0
        pci 0:19.0
        pci 0:19.1
        pci 0:19.2
        pci 0:19.3
end

northbridge amd/amdk8 "mc2"
        pci 0:1a.0
        pci 0:1a.0
        pci 0:1a.0
        pci 0:1a.1
        pci 0:1a.2
        pci 0:1a.3
end


northbridge amd/amdk8 "mc3"
        pci 0:1b.0
        pci 0:1b.0
        pci 0:1b.0
        pci 0:1b.1
        pci 0:1b.2
        pci 0:1b.3
end


dir /pc80
#dir /bioscall

cpu k8 "cpu0"
  register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
end

cpu k8 "cpu1"
end

cpu k8 "cpu2"
end

cpu k8 "cpu3"
end