/* SPDX-License-Identifier: GPL-2.0-only */

// Intel Serial IO Devices in ACPI Mode

// Serial IO Device BAR0 and BAR1 is 4KB
#define SIO_BAR_LEN 0x1000

// Put SerialIO device in D0 state
// Arg0 - BAR1 of device
// Arg1 - Set if device is in ACPI mode
Method (LPD0, 2, Serialized)
{
	// PCI mode devices will be handled by OS PCI bus driver
	If (LEqual (Arg1, 0)) {
		Return
	}

	OperationRegion (SPRT, SystemMemory, Add (Arg0, 0x84), 4)
	Field (SPRT, DWordAcc, NoLock, Preserve)
	{
		SPCS, 32
	}

	And (SPCS, 0xFFFFFFFC, SPCS)
	Store (SPCS, Local0) // Read back after writing

	// Use Local0 to avoid iasl warning: Method Local is set but never used
	And(Local0, Ones, Local0)
}

// Put SerialIO device in D3 state
// Arg0 - BAR1 of device
// Arg1 - Set if device is in ACPI mode
Method (LPD3, 2, Serialized)
{
	// PCI mode devices will be handled by OS PCI bus driver
	If (LEqual (Arg1, 0)) {
		Return
	}

	OperationRegion (SPRT, SystemMemory, Add (Arg0, 0x84), 4)
	Field (SPRT, DWordAcc, NoLock, Preserve)
	{
		SPCS, 32
	}

	Or (SPCS, 0x3, SPCS)
	Store (SPCS, Local0) // Read back after writing

	// Use Local0 to avoid iasl warning: Method Local is set but never used
	And(Local0, Ones, Local0)
}

// Serial IO Resource Consumption for BAR1
Device (SIOR)
{
	Name (_HID, EISAID("PNP0C02"))
	Name (_UID, 4)

	Name (RBUF, ResourceTemplate()
	{
		// Serial IO BAR1 (PCI config space) resources
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D0) // SDMA
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D1) // I2C0
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D2) // I2C1
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D3) // SPI0
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D4) // SPI1
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D5) // UART0
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D6) // UART1
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D7) // SDIO
	})

	// Update BAR1 address and length if set in NVS
	Method (_CRS, 0, NotSerialized)
	{
		// SDMA
		If (LNotEqual (\S0B1, Zero)) {
			CreateDwordField (^RBUF, ^B1D0._BAS, B0AD)
			CreateDwordField (^RBUF, ^B1D0._LEN, B0LN)
			Store (\S0B1, B0AD)
			Store (SIO_BAR_LEN, B0LN)
		}

		// I2C0
		If (LNotEqual (\S1B1, Zero)) {
			CreateDwordField (^RBUF, ^B1D1._BAS, B1AD)
			CreateDwordField (^RBUF, ^B1D1._LEN, B1LN)
			Store (\S1B1, B1AD)
			Store (SIO_BAR_LEN, B1LN)
		}

		// I2C1
		If (LNotEqual (\S2B1, Zero)) {
			CreateDwordField (^RBUF, ^B1D2._BAS, B2AD)
			CreateDwordField (^RBUF, ^B1D2._LEN, B2LN)
			Store (\S2B1, B2AD)
			Store (SIO_BAR_LEN, B2LN)
		}

		// SPI0
		If (LNotEqual (\S3B1, Zero)) {
			CreateDwordField (^RBUF, ^B1D3._BAS, B3AD)
			CreateDwordField (^RBUF, ^B1D3._LEN, B3LN)
			Store (\S3B1, B3AD)
			Store (SIO_BAR_LEN, B3LN)
		}

		// SPI1
		If (LNotEqual (\S4B1, Zero)) {
			CreateDwordField (^RBUF, ^B1D4._BAS, B4AD)
			CreateDwordField (^RBUF, ^B1D4._LEN, B4LN)
			Store (\S4B1, B4AD)
			Store (SIO_BAR_LEN, B4LN)
		}

		// UART0
		If (LNotEqual (\S5B1, Zero)) {
			CreateDwordField (^RBUF, ^B1D5._BAS, B5AD)
			CreateDwordField (^RBUF, ^B1D5._LEN, B5LN)
			Store (\S5B1, B5AD)
			Store (SIO_BAR_LEN, B5LN)
		}

		// UART1
		If (LNotEqual (\S6B1, Zero)) {
			CreateDwordField (^RBUF, ^B1D6._BAS, B6AD)
			CreateDwordField (^RBUF, ^B1D6._LEN, B6LN)
			Store (\S6B1, B6AD)
			Store (SIO_BAR_LEN, B6LN)
		}

		// SDIO
		If (LNotEqual (\S7B1, Zero)) {
			CreateDwordField (^RBUF, ^B1D7._BAS, B7AD)
			CreateDwordField (^RBUF, ^B1D7._LEN, B7LN)
			Store (\S7B1, B7AD)
			Store (SIO_BAR_LEN, B7LN)
		}

		Return (RBUF)
	}
}

Device (SDMA)
{
	// Serial IO DMA Controller
	Name (_HID, "INTL9C60")
	Name (_UID, 1)
	Name (_ADR, 0x00150000)

	// BAR0 is assigned during PCI enumeration and saved into NVS
	Name (RBUF, ResourceTemplate ()
	{
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
		Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
	})

	Method (_CRS, 0, NotSerialized)
	{
		// Update BAR0 address and length if set in NVS
		If (LNotEqual (\S0B0, Zero)) {
			CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
			CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
			Store (\S0B0, B0AD)
			Store (SIO_BAR_LEN, B0LN)
		}

		Return (RBUF)
	}

	Method (_STA, 0, NotSerialized)
	{
		If (LEqual (\S0EN, 0)) {
			Return (0x0)
		} Else {
			Return (0xF)
		}
	}
}

Device (I2C0)
{
	// Serial IO I2C0 Controller
	Method (_HID)
	{
		If (\ISWP ()) {
			// WildcatPoint
			Return ("INT3432")
		}

		// LynxPoint-LP
		Return ("INT33C2")
	}
	Name (_UID, 1)
	Name (_ADR, 0x00150001)

	Name (SSCN, Package () { 432, 507, 30 })
	Name (FMCN, Package () { 72, 160, 30 })

	// BAR0 is assigned during PCI enumeration and saved into NVS
	Name (RBUF, ResourceTemplate ()
	{
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
		Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
	})

	// DMA channels are only used if Serial IO DMA controller is enabled
	Name (DBUF, ResourceTemplate ()
	{
		FixedDMA (0x18, 4, Width32Bit, DMA1) // Tx
		FixedDMA (0x19, 5, Width32Bit, DMA2) // Rx
	})

	Method (_CRS, 0, NotSerialized)
	{
		// Update BAR0 address and length if set in NVS
		If (LNotEqual (\S1B0, Zero)) {
			CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
			CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
			Store (\S1B0, B0AD)
			Store (SIO_BAR_LEN, B0LN)
		}

		// Check if Serial IO DMA Controller is enabled
		If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) {
			Return (ConcatenateResTemplate (RBUF, DBUF))
		} Else {
			Return (RBUF)
		}
	}

	Method (_STA, 0, NotSerialized)
	{
		If (LEqual (\S1EN, 0)) {
			Return (0x0)
		} Else {
			Return (0xF)
		}
	}

	Method (_PS0, 0, Serialized)
	{
		^^LPD0 (\S1B1, \S1EN)
	}

	Method (_PS3, 0, Serialized)
	{
		^^LPD3 (\S1B1, \S1EN)
	}
}

Device (I2C1)
{
	// Serial IO I2C1 Controller
	Method (_HID)
	{
		If (\ISWP ()) {
			// WildcatPoint
			Return ("INT3433")
		}

		// LynxPoint-LP
		Return ("INT33C3")
	}
	Name (_UID, 1)
	Name (_ADR, 0x00150002)

	Name (SSCN, Package () { 432, 507, 30 })
	Name (FMCN, Package () { 72, 160, 30 })

	// BAR0 is assigned during PCI enumeration and saved into NVS
	Name (RBUF, ResourceTemplate ()
	{
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
		Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
	})

	// DMA channels are only used if Serial IO DMA controller is enabled
	Name (DBUF, ResourceTemplate ()
	{
		FixedDMA (0x1A, 6, Width32Bit, DMA1) // Tx
		FixedDMA (0x1B, 7, Width32Bit, DMA2) // Rx
	})

	Method (_CRS, 0, NotSerialized)
	{
		// Update BAR0 address and length if set in NVS
		If (LNotEqual (\S2B0, Zero)) {
			CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
			CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
			Store (\S2B0, B0AD)
			Store (SIO_BAR_LEN, B0LN)
		}

		// Check if Serial IO DMA Controller is enabled
		If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) {
			Return (ConcatenateResTemplate (RBUF, DBUF))
		} Else {
			Return (RBUF)
		}
	}

	Method (_STA, 0, NotSerialized)
	{
		If (LEqual (\S2EN, 0)) {
			Return (0x0)
		} Else {
			Return (0xF)
		}
	}

	Method (_PS0, 0, Serialized)
	{
		^^LPD0 (\S2B1, \S2EN)
	}

	Method (_PS3, 0, Serialized)
	{
		^^LPD3 (\S2B1, \S2EN)
	}
}

Device (SPI0)
{
	// Serial IO SPI0 Controller
	Method (_HID)
	{
		If (\ISWP ()) {
			// WildcatPoint
			Return ("INT3430")
		}

		// LynxPoint-LP
		Return ("INT33C0")
	}
	Name (_UID, 1)
	Name (_ADR, 0x00150003)

	// BAR0 is assigned during PCI enumeration and saved into NVS
	Name (RBUF, ResourceTemplate ()
	{
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
		Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
	})

	Method (_CRS, 0, NotSerialized)
	{
		// Update BAR0 address and length if set in NVS
		If (LNotEqual (\S3B0, Zero)) {
			CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
			CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
			Store (\S3B0, B0AD)
			Store (SIO_BAR_LEN, B0LN)
		}

		Return (RBUF)
	}

	Method (_STA, 0, NotSerialized)
	{
		If (LEqual (\S3EN, 0)) {
			Return (0x0)
		} Else {
			Return (0xF)
		}
	}

	Method (_PS0, 0, Serialized)
	{
		^^LPD0 (\S3B1, \S3EN)
	}

	Method (_PS3, 0, Serialized)
	{
		^^LPD3 (\S3B1, \S3EN)
	}
}

Device (SPI1)
{
	// Serial IO SPI1 Controller
	Method (_HID)
	{
		If (\ISWP ()) {
			// WildcatPoint
			Return ("INT3431")
		}

		// LynxPoint-LP
		Return ("INT33C1")
	}
	Name (_UID, 1)
	Name (_ADR, 0x00150004)

	// BAR0 is assigned during PCI enumeration and saved into NVS
	Name (RBUF, ResourceTemplate ()
	{
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
		Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
	})

	// DMA channels are only used if Serial IO DMA controller is enabled
	Name (DBUF, ResourceTemplate ()
	{
		FixedDMA (0x10, 0, Width32Bit, DMA1) // Tx
		FixedDMA (0x11, 1, Width32Bit, DMA2) // Rx
	})

	Method (_CRS, 0, NotSerialized)
	{
		// Update BAR0 address and length if set in NVS
		If (LNotEqual (\S4B0, Zero)) {
			CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
			CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
			Store (\S4B0, B0AD)
			Store (SIO_BAR_LEN, B0LN)
		}

		// Check if Serial IO DMA Controller is enabled
		If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) {
			Return (ConcatenateResTemplate (RBUF, DBUF))
		} Else {
			Return (RBUF)
		}
	}

	Method (_STA, 0, NotSerialized)
	{
		If (LEqual (\S4EN, 0)) {
			Return (0x0)
		} Else {
			Return (0xF)
		}
	}

	Method (_PS0, 0, Serialized)
	{
		^^LPD0 (\S4B1, \S4EN)
	}

	Method (_PS3, 0, Serialized)
	{
		^^LPD3 (\S4B1, \S4EN)
	}
}

Device (UAR0)
{
	// Serial IO UART0 Controller
	Method (_HID)
	{
		If (\ISWP ()) {
			// WildcatPoint
			Return ("INT3434")
		}

		// LynxPoint-LP
		Return ("INT33C4")
	}
	Name (_UID, 1)
	Name (_ADR, 0x00150005)

	// BAR0 is assigned during PCI enumeration and saved into NVS
	Name (RBUF, ResourceTemplate ()
	{
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
		Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {13}
	})

	// DMA channels are only used if Serial IO DMA controller is enabled
	Name (DBUF, ResourceTemplate ()
	{
		FixedDMA (0x16, 2, Width32Bit, DMA1) // Tx
		FixedDMA (0x17, 3, Width32Bit, DMA2) // Rx
	})

	Method (_CRS, 0, NotSerialized)
	{
		// Update BAR0 address and length if set in NVS
		If (LNotEqual (\S5B0, Zero)) {
			CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
			CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
			Store (\S5B0, B0AD)
			Store (SIO_BAR_LEN, B0LN)
		}

		// Check if Serial IO DMA Controller is enabled
		If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) {
			Return (ConcatenateResTemplate (RBUF, DBUF))
		} Else {
			Return (RBUF)
		}
	}

	Method (_STA, 0, NotSerialized)
	{
		If (LEqual (\S5EN, 0)) {
			Return (0x0)
		} Else {
			Return (0xF)
		}
	}

	Method (_PS0, 0, Serialized)
	{
		^^LPD0 (\S5B1, \S5EN)
	}

	Method (_PS3, 0, Serialized)
	{
		^^LPD3 (\S5B1, \S5EN)
	}
}

Device (UAR1)
{
	// Serial IO UART1 Controller
	Method (_HID)
	{
		If (\ISWP ()) {
			// WildcatPoint
			Return ("INT3435")
		}

		// LynxPoint-LP
		Return ("INT33C5")
	}
	Name (_UID, 1)
	Name (_ADR, 0x00150006)

	// BAR0 is assigned during PCI enumeration and saved into NVS
	Name (RBUF, ResourceTemplate ()
	{
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
		Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {13}
	})

	Method (_CRS, 0, NotSerialized)
	{
		// Update BAR0 address and length if set in NVS
		If (LNotEqual (\S6B0, Zero)) {
			CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
			CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
			Store (\S6B0, B0AD)
			Store (SIO_BAR_LEN, B0LN)
		}

		Return (RBUF)
	}

	Method (_STA, 0, NotSerialized)
	{
		If (LEqual (\S6EN, 0)) {
			Return (0x0)
		} Else {
			Return (0xF)
		}
	}

	Method (_PS0, 0, Serialized)
	{
		^^LPD0 (\S6B1, \S6EN)
	}

	Method (_PS3, 0, Serialized)
	{
		^^LPD3 (\S6B1, \S6EN)
	}
}

Device (SDIO)
{
	// Serial IO SDIO Controller
	Method (_HID)
	{
		If (\ISWP ()) {
			// WildcatPoint
			Return ("INT3436")
		}

		// LynxPoint-LP
		Return ("INT33C6")
	}
	Name (_CID, "PNP0D40")
	Name (_UID, 1)
	Name (_ADR, 0x00170000)

	// BAR0 is assigned during PCI enumeration and saved into NVS
	Name (RBUF, ResourceTemplate ()
	{
		Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
		Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {5}
	})

	Method (_CRS, 0, NotSerialized)
	{
		// Update BAR0 address and length if set in NVS
		If (LNotEqual (\S7B0, Zero)) {
			CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
			CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
			Store (\S7B0, B0AD)
			Store (SIO_BAR_LEN, B0LN)
		}

		Return (RBUF)
	}

	Method (_STA, 0, NotSerialized)
	{
		If (LEqual (\S7EN, 0)) {
			Return (0x0)
		} Else {
			Return (0xF)
		}
	}
}