/* * This file is part of the coreboot project. * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include void smm_southbridge_clear_state(void) { printk(BIOS_DEBUG, "Clearing SMI status registers\n"); if (pmc_get_smi_en() & APMC_EN) { printk(BIOS_INFO, "SMI# handler already enabled?\n"); return; } /* Dump and clear status registers */ pmc_clear_smi_status(); pmc_clear_pm1_status(); pmc_clear_tco_status(); pmc_clear_all_gpe_status(); } void smm_southbridge_enable(uint16_t pm1_events) { uint32_t smi_params = ENABLE_SMI_PARAMS; printk(BIOS_DEBUG, "Enabling SMIs.\n"); /* Configure events */ pmc_enable_pm1(pm1_events); pmc_disable_std_gpe(PME_B0_EN); /* * GPEs need to be disabled before enabling SMI. Otherwise, it could * lead to SMIs being triggered in coreboot preventing the progress of * normal boot-up. This is done as late as possible so that * pmc_fill_power_state can read the correct state of GPE0_EN* registers * and not lose information about the wake source. */ pmc_disable_all_gpe(); /* * Enable SMI generation: * - on APMC writes (io 0xb2) * - on writes to SLP_EN (sleep states) * - on writes to GBL_RLS (bios commands) * - on eSPI events, unless disabled (does nothing on LPC systems) * - on TCO events (TIMEOUT, case intrusion, ...), if enabled * No SMIs: * - on microcontroller writes (io 0x62/0x66) */ if (CONFIG(SOC_INTEL_COMMON_BLOCK_SMM_ESPI_DISABLE)) smi_params &= ~ESPI_SMI_EN; if (CONFIG(SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE)) smi_params |= TCO_SMI_EN; /* Enable SMI generation: */ pmc_enable_smi(smi_params); } void smm_setup_structures(void *gnvs, void *tcg, void *smi1) { /* * Issue SMI to set the gnvs pointer in SMM. * tcg and smi1 are unused. * * EAX = APM_CNT_GNVS_UPDATE * EBX = gnvs pointer * EDX = APM_CNT */ asm volatile ( "outb %%al, %%dx\n\t" : /* ignore result */ : "a" (APM_CNT_GNVS_UPDATE), "b" ((u32)gnvs), "d" (APM_CNT) ); }